8N3Q001EG-0028CDI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Timing and Frequency Control
• Characteristics: High precision, low power consumption
• Package: Small Outline Integrated Circuit (SOIC)
• Essence: Clock Generator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 2.5V to 3.3V
• Output Frequency Range: 1MHz to 200MHz
• Operating Temperature Range: -40°C to +85°C
• Output Type: Differential
• Phase Jitter: <1ps RMS (root mean square)

Detailed Pin Configuration

The 8N3Q001EG-0028CDI8 IC has a total of 16 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply Voltage | | 2 | GND | Ground | | 3 | OUT0+ | Differential Output 0 Positive | | 4 | OUT0- | Differential Output 0 Negative | | 5 | OUT1+ | Differential Output 1 Positive | | 6 | OUT1- | Differential Output 1 Negative | | 7 | OUT2+ | Differential Output 2 Positive | | 8 | OUT2- | Differential Output 2 Negative | | 9 | OUT3+ | Differential Output 3 Positive | | 10 | OUT3- | Differential Output 3 Negative | | 11 | OE | Output Enable | | 12 | SEL0 | Select Input 0 | | 13 | SEL1 | Select Input 1 | | 14 | SEL2 | Select Input 2 | | 15 | SEL3 | Select Input 3 | | 16 | VDD | Power Supply Voltage |

Functional Features

• Generates up to four differential clock outputs
• Supports selectable output frequencies
• Low phase jitter for improved signal integrity
• Output enable feature for power management

Advantages and Disadvantages

Advantages: - High precision timing control - Low power consumption - Small form factor package - Wide operating temperature range

Disadvantages: - Limited number of selectable output frequencies - Requires external voltage supply

Working Principles

The 8N3Q001EG-0028CDI8 is a clock generator IC that utilizes an internal oscillator circuit to generate precise clock signals. The selectable input pins allow users to choose the desired output frequency. The differential outputs provide improved noise immunity and signal quality. The output enable pin allows for power management by enabling or disabling the clock outputs.

Detailed Application Field Plans

The 8N3Q001EG-0028CDI8 IC finds applications in various fields, including: 1. Telecommunications: Used in network equipment, routers, and switches for clock synchronization. 2. Consumer Electronics: Integrated into audio/video devices, set-top boxes, and gaming consoles for timing control. 3. Industrial Automation: Utilized in programmable logic controllers (PLCs), motor control systems, and robotics for precise timing requirements. 4. Automotive: Incorporated into automotive electronics for engine control units (ECUs), infotainment systems, and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

1. 8N3Q001EG-0018CDI8: Similar specifications but with a different package (QFN).
2. 8N3Q001EG-0038CDI8: Higher output frequency range (up to 500MHz) with similar characteristics.
3. 8N3Q001EG-0048CDI8: Lower power consumption variant with reduced phase jitter.

(Note: The above alternative models are for illustrative purposes only and may not represent actual products.)

This entry provides a comprehensive overview of the 8N3Q001EG-0028CDI8 IC, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.