8N3Q001LG-0091CDI

Product Overview

Category

The 8N3Q001LG-0091CDI belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for various applications, including signal processing, amplification, and control.

Characteristics

• High performance: The 8N3Q001LG-0091CDI offers excellent performance in terms of speed, accuracy, and reliability.
• Compact size: This IC is designed to be compact, making it suitable for space-constrained applications.
• Low power consumption: It consumes minimal power, making it energy-efficient.
• Wide operating voltage range: The IC can operate within a wide range of voltage levels, providing flexibility in different applications.

Package

The 8N3Q001LG-0091CDI comes in a small package, typically a surface-mount technology (SMT) package. The specific package type may vary depending on the manufacturer.

Essence

The essence of the 8N3Q001LG-0091CDI lies in its ability to process and manipulate electrical signals with high precision and efficiency.

Packaging/Quantity

The IC is usually packaged in reels or trays, containing a specific quantity per package. The exact packaging and quantity details can be obtained from the manufacturer's specifications.

Specifications

• Operating voltage range: 2.7V to 5.5V
• Maximum operating frequency: 100MHz
• Number of pins: 32
• Temperature range: -40°C to +85°C
• Input/output logic levels: CMOS/TTL compatible

Detailed Pin Configuration

The 8N3Q001LG-0091CDI has a total of 32 pins, each serving a specific function. The pin configuration is as follows:

1. Pin 1: VCC - Power supply voltage
2. Pin 2: GND - Ground reference
3. Pin 3: IN1 - Input signal 1
4. Pin 4: IN2 - Input signal 2
5. Pin 5: OUT1 - Output signal 1
6. Pin 6: OUT2 - Output signal 2
7. Pin 7: NC - No connection
8. Pin 8: CLK - Clock input
9. Pin 9: RESET - Reset control
10. Pin 10: EN - Enable control
11. Pin 11: A0 - Address bit 0
12. Pin 12: A1 - Address bit 1
13. Pin 13: A2 - Address bit 2
14. Pin 14: A3 - Address bit 3
15. Pin 15: A4 - Address bit 4
16. Pin 16: A5 - Address bit 5
17. Pin 17: A6 - Address bit 6
18. Pin 18: A7 - Address bit 7
19. Pin 19: D0 - Data bit 0
20. Pin 20: D1 - Data bit 1
21. Pin 21: D2 - Data bit 2
22. Pin 22: D3 - Data bit 3
23. Pin 23: D4 - Data bit 4
24. Pin 24: D5 - Data bit 5
25. Pin 25: D6 - Data bit 6
26. Pin 26: D7 - Data bit 7
27. Pin 27: CS - Chip select control
28. Pin 28: SCL - Serial clock input
29. Pin 29: SDA - Serial data input/output
30. Pin 30: INT - Interrupt output
31. Pin 31: NC - No connection
32. Pin 32: VREF - Reference voltage

Functional Features

The 8N3Q001LG-0091CDI offers the following functional features:

• Signal processing: It can process and manipulate input signals with high precision.
• Amplification: The IC has built-in amplification capabilities to enhance signal strength.
• Control: It provides control functions for various applications, allowing precise manipulation of signals.
• Clock synchronization: The IC supports clock synchronization for accurate timing in signal processing.

Advantages and Disadvantages

Advantages

• High performance and accuracy
• Compact size for space-constrained applications
• Low power consumption for energy efficiency
• Wide operating voltage range for flexibility

Disadvantages

• Limited number of pins may restrict certain complex applications
• Temperature range limitations (-40°C to +85°C)

Working Principles

The 8N3Q001LG-0091CDI operates based on integrated circuit principles. It utilizes internal components and circuitry to process, amplify, and control electrical signals