8N3QV01FG-0155CDI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Timing and Frequency Control
• Characteristics: High precision, low power consumption
• Package: QFN (Quad Flat No-leads)
• Essence: Clock Generator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 1.8V to 3.3V
• Output Frequency Range: 10MHz to 1.5GHz
• Output Type: LVPECL (Low Voltage Positive Emitter-Coupled Logic)
• Operating Temperature Range: -40°C to +85°C
• Phase Jitter: < 1 ps RMS (Root Mean Square)

Detailed Pin Configuration

The 8N3QV01FG-0155CDI8 IC has a total of 16 pins arranged in a specific configuration: 1. VDD: Power supply pin 2. GND: Ground pin 3. OUT0: Output 0 pin 4. OUT0B: Complementary output 0 pin 5. OUT1: Output 1 pin 6. OUT1B: Complementary output 1 pin 7. OUT2: Output 2 pin 8. OUT2B: Complementary output 2 pin 9. OUT3: Output 3 pin 10. OUT3B: Complementary output 3 pin 11. FB: Feedback pin 12. OE: Output Enable pin 13. SEL0: Select input 0 pin 14. SEL1: Select input 1 pin 15. SEL2: Select input 2 pin 16. SEL3: Select input 3 pin

Functional Features

• Clock Generation: The 8N3QV01FG-0155CDI8 IC generates high-precision clock signals with low phase jitter.
• Frequency Control: It allows precise control of the output frequency within the specified range.
• Output Enable: The OE pin enables or disables the output signals.
• Selectable Outputs: The SEL pins allow the selection of one of the four available outputs.
• Complementary Outputs: Each output has a complementary output for differential signaling.

Advantages and Disadvantages

Advantages: - High precision clock generation - Low power consumption - Wide operating voltage range - Small package size

Disadvantages: - Limited output frequency range (10MHz to 1.5GHz) - Requires external components for specific applications

Working Principles

The 8N3QV01FG-0155CDI8 IC utilizes an internal crystal oscillator or an external reference clock to generate highly accurate clock signals. The input frequency is divided and multiplied using PLL (Phase-Locked Loop) techniques to achieve the desired output frequency. The output signals are then shaped and amplified to meet LVPECL standards.

Detailed Application Field Plans

The 8N3QV01FG-0155CDI8 IC finds applications in various fields, including: 1. Telecommunications: Clock synchronization in network equipment and base stations. 2. Data Centers: Timing control for high-speed data transmission and processing. 3. Industrial Automation: Synchronization of industrial processes and control systems. 4. Test and Measurement: Precise timing for accurate measurements and signal analysis. 5. Consumer Electronics: Clock generation for audio/video synchronization and digital interfaces.

Detailed and Complete Alternative Models

1. 8N3QV01FG-0120CDI8: Similar specifications but with a lower output frequency range (10MHz to 1.2GHz).
2. 8N3QV01FG-0200CDI8: Similar specifications but with a higher output frequency range (10MHz to 2.0GHz).
3. 8N3QV01FG-0155CDI6: Similar specifications but with a different package (TSSOP-16).

(Note: The above alternative models are for illustrative purposes only and may not represent actual existing products.)

This concludes the encyclopedia entry for the 8N3QV01FG-0155CDI8 IC, providing comprehensive information about its product details, specifications, features, advantages, disadvantages, applications, and alternative models.