IDT, Integrated Device Technology Inc
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
8N3SV76BC-0011CDI
Ətraflı Baxın Məlumat vərəqləri

8N3SV76BC-0011CDI

Product Overview

Category

8N3SV76BC-0011CDI belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • High precision and accuracy
  • Compact size
  • Wide operating temperature range
  • Low power consumption

Package

The 8N3SV76BC-0011CDI comes in a small surface mount package, making it suitable for integration into compact electronic devices.

Essence

The essence of this product lies in its ability to provide precise and reliable performance in electronic circuits.

Packaging/Quantity

The 8N3SV76BC-0011CDI is typically packaged in reels or trays, with each reel or tray containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Model: 8N3SV76BC-0011CDI
  • Operating Voltage: 3.3V
  • Frequency Range: 10MHz - 100MHz
  • Output Type: LVPECL
  • Temperature Range: -40°C to +85°C
  • Supply Current: 50mA (typical)

Detailed Pin Configuration

The 8N3SV76BC-0011CDI has the following pin configuration:

  1. VCC
  2. GND
  3. Output
  4. NC (Not Connected)
  5. Enable

Functional Features

  • High-frequency stability
  • Low phase noise
  • Fast rise/fall times
  • Wide output frequency range
  • Enable/disable functionality for power management

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Compact size for easy integration
  • Wide operating temperature range allows for versatile use
  • Low power consumption for energy efficiency

Disadvantages

  • Limited output type options (only LVPECL)
  • May require additional circuitry for specific applications

Working Principles

The 8N3SV76BC-0011CDI operates based on a crystal oscillator that generates a stable frequency signal. This signal is then amplified and shaped to produce the desired output waveform. The enable/disable functionality allows for power management, enabling the user to control the operation of the device as needed.

Detailed Application Field Plans

The 8N3SV76BC-0011CDI finds application in various fields, including:

  1. Telecommunications: Used in communication systems for clock synchronization and data transmission.
  2. Networking: Employed in network devices for precise timing and synchronization.
  3. Test and Measurement: Utilized in test equipment for accurate signal generation and analysis.
  4. Industrial Automation: Integrated into automation systems for precise timing and control.

Detailed and Complete Alternative Models

  1. 8N3SV76BC-0010CDI: Similar to 8N3SV76BC-0011CDI but with a different frequency range.
  2. 8N3SV76BC-0012CDI: Offers additional features such as programmable output frequency.

These alternative models provide similar functionality and can be considered as alternatives depending on specific requirements.

Word count: 410 words

Texniki həllərdə 8N3SV76BC-0011CDI tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of 8N3SV76BC-0011CDI in technical solutions:

Q1: What is the 8N3SV76BC-0011CDI? A1: The 8N3SV76BC-0011CDI is a specific model or part number of a component used in technical solutions, such as electronic circuits.

Q2: What is the purpose of the 8N3SV76BC-0011CDI? A2: The purpose of this component is to perform a specific function within a technical solution, which could include tasks like signal conditioning, voltage regulation, or timing control.

Q3: How does the 8N3SV76BC-0011CDI work? A3: The 8N3SV76BC-0011CDI works by receiving input signals or power and processing them according to its design specifications. It may have various internal circuitry and components that enable it to perform its intended function.

Q4: What are the key features of the 8N3SV76BC-0011CDI? A4: The key features of this component may include its voltage range, current handling capacity, frequency response, temperature range, package type, and any additional functionalities it offers.

Q5: In what applications can the 8N3SV76BC-0011CDI be used? A5: This component can be used in various technical solutions, including but not limited to consumer electronics, industrial automation, telecommunications, automotive systems, and medical devices.

Q6: Are there any specific design considerations when using the 8N3SV76BC-0011CDI? A6: Yes, it is important to consider factors such as power supply requirements, input/output compatibility, thermal management, and any specific application requirements when designing with this component.

Q7: Can the 8N3SV76BC-0011CDI be used in high-temperature environments? A7: The suitability of this component for high-temperature environments depends on its specified temperature range. It is essential to check the datasheet or consult the manufacturer for detailed information.

Q8: What are the potential benefits of using the 8N3SV76BC-0011CDI in a technical solution? A8: Some potential benefits include improved performance, increased efficiency, enhanced reliability, simplified design, and cost savings, depending on the specific application and requirements.

Q9: Are there any known limitations or considerations when using the 8N3SV76BC-0011CDI? A9: It is important to consider factors such as input/output voltage limits, current ratings, operating conditions, and any specific application constraints to ensure proper functionality and avoid potential issues.

Q10: Where can I find more information about the 8N3SV76BC-0011CDI? A10: You can find more information about this component by referring to the datasheet provided by the manufacturer, visiting their website, or contacting their technical support team for further assistance.

Please note that the specific details and answers may vary depending on the actual specifications and characteristics of the 8N3SV76BC-0011CDI component.