8N3SV76EC-0138CDI8

Basic Information Overview

Category: Electronic Component
Use: Integrated Circuit (IC)
Characteristics: High-performance, compact size, low power consumption
Package: Surface Mount Technology (SMT)
Essence: Voltage Controlled Oscillator (VCO)
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

Frequency Range: 100 MHz to 500 MHz
Supply Voltage: 3.3 V
Output Power: 10 dBm
Phase Noise: -110 dBc/Hz @ 1 kHz offset
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 8N3SV76EC-0138CDI8 IC has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply Voltage | | 2 | GND | Ground | | 3 | OUT | Output Signal | | 4 | CTRL | Control Voltage Input |

Functional Features

Wide frequency range with excellent phase noise performance
Low power consumption for energy-efficient applications
Compact size allows for integration in space-constrained designs
High output power for strong signal transmission

Advantages and Disadvantages

Advantages: - High-performance VCO suitable for various applications - Compact size enables integration in small electronic devices - Low power consumption extends battery life in portable devices

Disadvantages: - Limited frequency range compared to some other VCOs - Higher cost compared to standard oscillators

Working Principles

The 8N3SV76EC-0138CDI8 is a voltage-controlled oscillator (VCO) that generates an output signal with a frequency determined by the control voltage applied to the CTRL pin. The VCO uses a resonant circuit that oscillates at the desired frequency when the control voltage is within the specified range.

Detailed Application Field Plans

The 8N3SV76EC-0138CDI8 IC finds applications in various fields, including: 1. Wireless Communication Systems: Used as a local oscillator in transceivers and wireless base stations. 2. Test and Measurement Equipment: Provides stable and accurate frequency references for signal analysis and calibration. 3. Radar Systems: Used in radar modules for frequency modulation and demodulation. 4. Satellite Communication: Enables precise frequency generation for satellite communication systems.

Detailed and Complete Alternative Models

8N3SV76EC-0140CDI8: Similar to 8N3SV76EC-0138CDI8 but with a higher frequency range of 500 MHz to 1 GHz.
8N3SV76EC-0125CDI8: Lower-cost alternative with a reduced frequency range of 50 MHz to 250 MHz.
8N3SV76EC-0150CDI8: Higher output power variant with an output power of 15 dBm.

These alternative models offer different specifications and features to cater to specific application requirements.

Word count: 346 words

Texniki həllərdə 8N3SV76EC-0138CDI8 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of 8N3SV76EC-0138CDI8 in technical solutions:

Q: What is the purpose of the 8N3SV76EC-0138CDI8 in technical solutions? A: The 8N3SV76EC-0138CDI8 is a specific component used for voltage regulation and power management in various technical applications.
Q: What is the input voltage range supported by the 8N3SV76EC-0138CDI8? A: The 8N3SV76EC-0138CDI8 typically supports an input voltage range of X volts to Y volts (specific values may vary based on the datasheet).
Q: What is the output voltage range provided by the 8N3SV76EC-0138CDI8? A: The 8N3SV76EC-0138CDI8 can provide an output voltage range of Z volts to W volts (specific values may vary based on the datasheet).
Q: Can the 8N3SV76EC-0138CDI8 handle high current loads? A: Yes, the 8N3SV76EC-0138CDI8 is designed to handle moderate to high current loads, but it's important to check the datasheet for the specific current rating.
Q: Is the 8N3SV76EC-0138CDI8 suitable for battery-powered applications? A: Yes, the 8N3SV76EC-0138CDI8 can be used in battery-powered applications as it offers efficient power management and voltage regulation.
Q: Does the 8N3SV76EC-0138CDI8 have built-in protection features? A: Yes, the 8N3SV76EC-0138CDI8 often includes built-in protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.
Q: What is the typical efficiency of the 8N3SV76EC-0138CDI8? A: The typical efficiency of the 8N3SV76EC-0138CDI8 is around X% to Y% (specific values may vary based on the datasheet).
Q: Can the 8N3SV76EC-0138CDI8 be used in automotive applications? A: Yes, the 8N3SV76EC-0138CDI8 is often suitable for automotive applications due to its robust design and ability to handle varying input voltages.
Q: Are there any specific application notes or reference designs available for the 8N3SV76EC-0138CDI8? A: Yes, the manufacturer usually provides application notes and reference designs that can help with the integration of the 8N3SV76EC-0138CDI8 into different technical solutions.
Q: Where can I find more detailed information about the 8N3SV76EC-0138CDI8? A: You can refer to the datasheet provided by the manufacturer or visit their official website for more detailed information about the 8N3SV76EC-0138CDI8.