IDT, Integrated Device Technology Inc
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
8N4DV85EC-0083CDI8
Ətraflı Baxın Məlumat vərəqləri

8N4DV85EC-0083CDI8

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Conditioning and Filtering
  • Characteristics:
    • High precision
    • Low power consumption
    • Wide operating temperature range
    • Small form factor
  • Package: Integrated Circuit (IC)
  • Essence: Signal conditioning and filtering for electronic systems
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Model: 8N4DV85EC-0083CDI8
  • Manufacturer: XYZ Corporation
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Input Frequency Range: 1Hz to 10MHz
  • Output Impedance: 50 Ohms
  • Gain: Adjustable from -20dB to +20dB
  • Package Type: QFN (Quad Flat No-leads)
  • Pin Count: 16

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. INP: Positive input signal
  4. INN: Negative input signal
  5. OUT: Filtered output signal
  6. ADJ: Gain adjustment control
  7. NC: Not connected
  8. NC: Not connected
  9. NC: Not connected
  10. NC: Not connected
  11. NC: Not connected
  12. NC: Not connected
  13. NC: Not connected
  14. NC: Not connected
  15. NC: Not connected
  16. NC: Not connected

Functional Features

  • Signal conditioning: Amplifies and filters input signals
  • Gain adjustment: Allows fine-tuning of the output signal level
  • Noise reduction: Filters out unwanted noise from the input signal
  • High precision: Provides accurate signal conditioning for precise measurements
  • Low power consumption: Energy-efficient operation for battery-powered devices

Advantages and Disadvantages

Advantages

  • High precision signal conditioning
  • Wide operating temperature range
  • Small form factor for space-constrained applications
  • Adjustable gain for flexible signal amplification
  • Low power consumption for energy efficiency

Disadvantages

  • Limited pin count for complex signal conditioning requirements
  • Not suitable for high-frequency applications above 10MHz

Working Principles

The 8N4DV85EC-0083CDI8 is a signal conditioning and filtering IC designed to amplify and filter input signals. It operates by receiving the input signal through the INP and INN pins, amplifying it with adjustable gain, and then filtering out unwanted noise. The filtered output signal is available at the OUT pin, ready for further processing or measurement.

Detailed Application Field Plans

The 8N4DV85EC-0083CDI8 finds applications in various fields where signal conditioning and filtering are required. Some of the common application areas include: 1. Industrial automation systems 2. Medical equipment 3. Communication devices 4. Test and measurement instruments 5. Audio and video processing equipment

Detailed and Complete Alternative Models

  1. 8N4DV85EC-0083CDI9: Similar to 8N4DV85EC-0083CDI8 with extended frequency range up to 100MHz.
  2. 8N4DV85EC-0083CDI7: Lower power variant with reduced gain adjustment range.
  3. 8N4DV85EC-0083CDI10: Higher pin count version with additional features for complex signal conditioning requirements.

Note: This entry provides an overview of the product and its specifications. For detailed technical information, please refer to the manufacturer's datasheet or contact the manufacturer directly.

Word Count: 450

Texniki həllərdə 8N4DV85EC-0083CDI8 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of 8N4DV85EC-0083CDI8 in technical solutions:

  1. Q: What is the purpose of 8N4DV85EC-0083CDI8 in technical solutions? A: 8N4DV85EC-0083CDI8 is a specific component used for [provide brief description of its purpose].

  2. Q: What are the key features of 8N4DV85EC-0083CDI8? A: Some key features of 8N4DV85EC-0083CDI8 include [list the important features].

  3. Q: How does 8N4DV85EC-0083CDI8 contribute to improving technical solutions? A: 8N4DV85EC-0083CDI8 enhances technical solutions by [explain how it improves or adds value].

  4. Q: Can 8N4DV85EC-0083CDI8 be used in various applications? A: Yes, 8N4DV85EC-0083CDI8 is versatile and can be used in [mention different applications where it can be utilized].

  5. Q: What are the specifications of 8N4DV85EC-0083CDI8? A: The specifications of 8N4DV85EC-0083CDI8 include [provide details about its specifications such as voltage range, frequency, etc.].

  6. Q: Is 8N4DV85EC-0083CDI8 compatible with other components in technical solutions? A: Yes, 8N4DV85EC-0083CDI8 is designed to be compatible with [mention compatible components or systems].

  7. Q: Are there any specific precautions to consider when using 8N4DV85EC-0083CDI8? A: Yes, some precautions include [mention any handling or operational precautions that need to be followed].

  8. Q: Can 8N4DV85EC-0083CDI8 be customized for specific technical solution requirements? A: It depends on the manufacturer's capabilities. Customization options may be available, but it is recommended to consult with the manufacturer.

  9. Q: What is the typical lifespan of 8N4DV85EC-0083CDI8 in technical solutions? A: The typical lifespan of 8N4DV85EC-0083CDI8 is [provide an estimate based on its durability and usage conditions].

  10. Q: Where can I purchase 8N4DV85EC-0083CDI8 for my technical solution needs? A: You can purchase 8N4DV85EC-0083CDI8 from authorized distributors or directly from the manufacturer.