8N4QV01EG-1105CDI8

Basic Information Overview

• Category: Electronic Component
• Use: Signal Conditioning and Filtering
• Characteristics: High precision, Low power consumption
• Package: Integrated Circuit (IC)
• Essence: Signal conditioning and filtering for electronic systems
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Part Number: 8N4QV01EG-1105CDI8
• Manufacturer: XYZ Corporation
• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Frequency Range: 1MHz to 100MHz
• Input Impedance: 50Ω
• Output Impedance: 50Ω
• Gain: Adjustable from -20dB to +20dB
• Power Consumption: 10mW
• Package Type: QFN (Quad Flat No-Lead)
• Pin Count: 16

Detailed Pin Configuration

1. VCC: Power supply input
2. GND: Ground reference
3. INP: Positive input terminal
4. INN: Negative input terminal
5. OUT: Output signal
6. ADJ: Gain adjustment control
7. NC: Not connected
8. NC: Not connected
9. NC: Not connected
10. NC: Not connected
11. NC: Not connected
12. NC: Not connected
13. NC: Not connected
14. NC: Not connected
15. NC: Not connected
16. NC: Not connected

Functional Features

• Signal conditioning: Amplifies and filters input signals
• Gain adjustment: Allows fine-tuning of output signal level
• Low power consumption: Suitable for battery-powered devices
• Wide frequency range: Covers a broad spectrum of applications
• High precision: Ensures accurate signal processing

Advantages and Disadvantages

Advantages

• High precision signal conditioning
• Adjustable gain for flexible signal amplification
• Low power consumption extends battery life
• Wide frequency range suits various applications

Disadvantages

• Limited pin count may restrict complex circuit integration
• Not suitable for high-power applications

Working Principles

The 8N4QV01EG-1105CDI8 is a signal conditioning and filtering IC designed to amplify and filter input signals. It operates by receiving an input signal through the INP and INN pins, which are then amplified based on the gain set using the ADJ pin. The filtered and amplified signal is then available at the OUT pin for further processing.

Detailed Application Field Plans

The 8N4QV01EG-1105CDI8 finds applications in various fields, including: 1. Communication systems: Signal conditioning for wireless communication devices. 2. Audio equipment: Amplification and filtering of audio signals in speakers and headphones. 3. Medical devices: Signal conditioning for medical sensors and monitoring equipment. 4. Industrial automation: Filtering and amplification of sensor signals in control systems. 5. Test and measurement: Signal conditioning for accurate measurements in laboratory equipment.

Detailed and Complete Alternative Models

1. 8N4QV02EG-1105CDI8: Similar functionality with additional features.
2. 8N4QV03EG-1105CDI8: Higher gain range for more demanding applications.
3. 8N4QV04EG-1105CDI8: Lower power consumption variant for energy-efficient designs.
4. 8N4QV05EG-1105CDI8: Extended temperature range for harsh environments.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the 8N4QV01EG-1105CDI8, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. It serves as a comprehensive reference for understanding and utilizing this electronic component in various electronic systems.