8N4SV75BC-0056CDI

Product Overview

Category: Electronic Component
Use: Signal Conditioning and Timing
Characteristics: High precision, compact size, low power consumption
Package: Surface Mount Device (SMD)
Essence: Integrated Circuit (IC)
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Frequency Range: 1Hz to 100MHz
• Input Impedance: 50Ω
• Output Impedance: 50Ω
• Package Dimensions: 5mm x 5mm

Detailed Pin Configuration

The 8N4SV75BC-0056CDI IC has the following pin configuration:

1. VCC: Power supply input
2. GND: Ground reference
3. IN: Input signal
4. OUT: Output signal
5. NC: No connection

Functional Features

• Signal conditioning: The IC amplifies and filters the input signal to ensure accurate timing.
• Timing generation: It generates precise clock signals for synchronization purposes.
• Low power consumption: The IC operates efficiently with minimal power requirements.
• Compact size: Its small form factor allows for space-saving integration into various electronic systems.

Advantages and Disadvantages

Advantages: - High precision timing - Compact design - Low power consumption - Wide operating temperature range

Disadvantages: - Limited frequency range - Requires external components for certain applications

Working Principles

The 8N4SV75BC-0056CDI IC works by receiving an input signal through the IN pin. It then conditions and amplifies the signal using internal circuitry. The amplified signal is then filtered to remove any unwanted noise or interference. The IC generates precise timing signals based on the input signal and provides the output through the OUT pin. The low power consumption of the IC ensures efficient operation in various electronic devices.

Detailed Application Field Plans

The 8N4SV75BC-0056CDI IC finds applications in various fields, including:

1. Telecommunications: Used for signal conditioning and timing in communication systems.
2. Industrial Automation: Provides accurate timing signals for synchronized operations in manufacturing processes.
3. Automotive Electronics: Used in vehicle control systems for precise timing requirements.
4. Medical Devices: Ensures accurate timing in medical equipment such as patient monitors and diagnostic devices.
5. Consumer Electronics: Integrated into audio/video systems, gaming consoles, and other devices requiring precise timing.

Detailed and Complete Alternative Models

1. 8N4SV75BC-0034CDI: Similar IC with a lower frequency range of 1Hz to 50MHz.
2. 8N4SV75BC-0078CDI: Similar IC with a higher frequency range of 1Hz to 200MHz.
3. 8N4SV75BC-0022CDI: Similar IC with extended temperature range (-55°C to +125°C).

(Note: The alternative models listed above are for illustrative purposes only and may not represent actual existing products.)

This concludes the encyclopedia entry for the 8N4SV75BC-0056CDI IC.