MIC207.5V

Product Overview

Category

The MIC207.5V belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the output voltage in electronic circuits.

Characteristics

• Input Voltage Range: 4.5V to 26V
• Output Voltage: 2.5V
• Low Dropout Voltage: 350mV at 1A
• Low Quiescent Current: 75µA
• Package: SOT-23-5
• Operating Temperature Range: -40°C to 125°C
• Shutdown Mode for Power-Saving
• Overcurrent and Thermal Protection

Package

The MIC207.5V is available in a SOT-23-5 package.

Essence

The essence of the MIC207.5V lies in its ability to provide a stable and regulated output voltage with low dropout and quiescent current, making it suitable for various electronic applications.

Packaging/Quantity

The MIC207.5V is typically available in reels containing 3000 units.

Specifications

• Input Voltage Range: 4.5V to 26V
• Output Voltage: 2.5V
• Dropout Voltage: 350mV at 1A
• Quiescent Current: 75µA
• Package Type: SOT-23-5
• Operating Temperature Range: -40°C to 125°C
• Shutdown Current: 0.1µA
• Overcurrent Protection Threshold: 1.5A
• Thermal Shutdown: 160°C

Detailed Pin Configuration

The MIC207.5V has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. BYP (Bypass) 5. VOUT (Output Voltage)

Functional Features

• Low Dropout Voltage
• Low Quiescent Current
• Shutdown Mode for Power Saving
• Overcurrent and Thermal Protection
• Enable Pin for Control
• Bypass Pin for Noise Reduction

Advantages

• Wide Input Voltage Range
• Low Dropout Voltage
• Low Quiescent Current
• Thermal and Overcurrent Protection
• Small Package Size

Disadvantages

• Limited Output Current Capacity
• Sensitive to Bypass Capacitor Quality

Working Principles

The MIC207.5V operates by comparing the reference voltage with the feedback voltage to regulate the output voltage. The enable pin controls the regulator's operation, and the bypass pin reduces noise.

Detailed Application Field Plans

The MIC207.5V is commonly used in battery-powered devices, portable electronics, and low-power applications where a stable and efficient voltage regulation is required. It is also suitable for IoT devices, sensor modules, and handheld instruments.

Detailed and Complete Alternative Models

Some alternative models to the MIC207.5V include the MIC2940A, LM2937, and LT1763 voltage regulators. These alternatives offer similar features and performance characteristics, providing flexibility in design choices.

This comprehensive entry provides detailed information about the MIC207.5V, including its category, basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.