Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX16039PLA26+T
Ətraflı Baxın Məlumat vərəqləri

MAX16039PLA26+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Monitor and Reset Circuit
  • Characteristics: Low-power, high-accuracy voltage monitoring, reset generation, and power supply sequencing
  • Package: 6-pin SOT23 package
  • Essence: Provides a reliable and efficient solution for voltage monitoring and reset generation in various electronic systems
  • Packaging/Quantity: Available in tape and reel packaging with 3000 units per reel

Specifications

  • Supply Voltage Range: 1.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Threshold Voltage Options: 2.6V
  • Reset Timeout Period: Adjustable from 1ms to 640ms
  • Quiescent Current: 1.5µA (typical)

Detailed Pin Configuration

The MAX16039PLA26+T features the following pin configuration:

  1. GND: Ground connection
  2. RESET#: Active-low reset output
  3. MR#: Manual reset input
  4. VCC: Positive supply voltage
  5. TH: Threshold voltage selection input
  6. NC: No connection

Functional Features

  • Voltage Monitoring: Monitors the supply voltage and generates a reset signal when it falls below the threshold voltage.
  • Reset Generation: Provides an active-low reset signal to the system until the supply voltage rises above the threshold voltage.
  • Power Supply Sequencing: Ensures proper power-up and power-down sequencing in multi-voltage systems.

Advantages and Disadvantages

Advantages: - Low-power consumption - High accuracy voltage monitoring - Adjustable reset timeout period - Small form factor package

Disadvantages: - Limited threshold voltage options - No built-in hysteresis

Working Principles

The MAX16039PLA26+T operates by comparing the supply voltage with the threshold voltage set by the TH pin. When the supply voltage drops below the threshold voltage, the RESET# pin is asserted low, indicating a reset condition. The reset signal remains active until the supply voltage rises above the threshold voltage or a manual reset is triggered through the MR# pin.

Detailed Application Field Plans

The MAX16039PLA26+T finds applications in various electronic systems where voltage monitoring and reset generation are critical. Some potential application fields include:

  1. Microcontrollers: Ensuring proper system reset during power fluctuations.
  2. Industrial Control Systems: Monitoring power supply integrity for reliable operation.
  3. Battery-Powered Devices: Preventing damage due to undervoltage conditions.
  4. Automotive Electronics: Resetting microcontrollers and sensors during power cycling.

Detailed and Complete Alternative Models

  1. MAX16038PLA26+T: Similar to MAX16039PLA26+T but with a different threshold voltage option (2.6V).
  2. MAX16040PLA26+T: Provides additional hysteresis for improved noise immunity.
  3. MAX16041PLA26+T: Offers adjustable reset timeout period up to 10 seconds.

These alternative models provide flexibility in selecting the most suitable voltage monitor and reset circuit based on specific requirements.

Word count: 335 words

Texniki həllərdə MAX16039PLA26+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX16039PLA26+T in technical solutions:

  1. Q: What is the MAX16039PLA26+T? A: The MAX16039PLA26+T is a low-power, voltage-monitoring circuit designed for use in various technical solutions.

  2. Q: What is the purpose of the MAX16039PLA26+T? A: The MAX16039PLA26+T is used to monitor voltage levels and provide accurate power supply monitoring in applications such as industrial control systems, automotive electronics, and battery-powered devices.

  3. Q: How does the MAX16039PLA26+T work? A: The MAX16039PLA26+T monitors the voltage level of the power supply and generates an output signal when the voltage exceeds or falls below a certain threshold.

  4. Q: What is the operating voltage range of the MAX16039PLA26+T? A: The MAX16039PLA26+T operates within a voltage range of 1.6V to 5.5V.

  5. Q: Can the MAX16039PLA26+T be used with different types of power supplies? A: Yes, the MAX16039PLA26+T can be used with various power supply types, including single-cell lithium-ion batteries, multi-cell alkaline batteries, and regulated power supplies.

  6. Q: Does the MAX16039PLA26+T have any built-in protection features? A: Yes, the MAX16039PLA26+T includes built-in overvoltage and undervoltage detection, which helps protect the system from potential damage.

  7. Q: Can the MAX16039PLA26+T be used in automotive applications? A: Yes, the MAX16039PLA26+T is suitable for automotive applications and complies with the relevant automotive standards.

  8. Q: What is the output format of the MAX16039PLA26+T? A: The MAX16039PLA26+T provides an active-low, open-drain output that can be easily interfaced with other digital circuits.

  9. Q: Can the threshold voltage levels be adjusted in the MAX16039PLA26+T? A: Yes, the threshold voltage levels can be programmed using external resistors to meet specific application requirements.

  10. Q: Is the MAX16039PLA26+T available in different package options? A: Yes, the MAX16039PLA26+T is available in a small 6-pin SOT23 package, which makes it suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of the MAX16039PLA26+T.