MAX16930AGLR/VY+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Quiescent Current
• Package: 40-Pin TQFN (Thin Quad Flat No-Lead)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 4.5V to 60V
• Output Voltage Range: 1.2V to 57V
• Maximum Output Current: 3A
• Quiescent Current: 20µA
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16930AGLR/VY+T has a total of 40 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. EN: Enable Control
3. PGND: Power Ground
4. SW: Switch Node
5. BST: Boost Capacitor Connection
6. FB: Feedback Voltage
7. COMP: Compensation Node
8. SS/TRK: Soft-Start/Tracking
9. VCC: Supply Voltage
10. AGND: Analog Ground
11. PG: Power Good Indicator
12. RT: Timing Resistor
13. SYNC: Synchronization Input
14. CLKOUT: Clock Output
15. CLKIN: Clock Input
16. VDD: Digital Supply Voltage
17. SD: Shutdown Control
18. ISET: Output Current Set
19. VOUT: Output Voltage
20. PGND: Power Ground 21-40: NC (No Connect)

Functional Features

• Wide input voltage range allows for versatile applications.
• High efficiency ensures minimal power loss.
• Low quiescent current reduces standby power consumption.
• Power good indicator provides system status information.
• Synchronization input allows for synchronization with an external clock.

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources. - High efficiency results in energy savings and reduced heat dissipation. - Low quiescent current prolongs battery life in portable applications. - Power good indicator enhances system reliability and fault detection. - Synchronization input facilitates integration into multi-device systems.

Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - Complex pin configuration requires careful attention during circuit design. - Higher cost compared to traditional linear regulators.

Working Principles

The MAX16930AGLR/VY+T is a voltage regulator IC that converts an input voltage within the range of 4.5V to 60V to a regulated output voltage between 1.2V and 57V. It utilizes a boost converter topology to achieve high efficiency power conversion. The device operates by controlling the duty cycle of an internal switch to regulate the output voltage. Feedback control ensures the output voltage remains stable under varying load conditions. Additional features such as soft-start, power good indicator, and synchronization input enhance the functionality and reliability of the device.

Detailed Application Field Plans

The MAX16930AGLR/VY+T finds application in various fields, including:

1. Automotive: Power management in automotive systems, such as infotainment systems, lighting modules, and advanced driver-assistance systems (ADAS).
2. Industrial: Power supply for industrial automation equipment, motor drives, and control systems.
3. Telecommunications: Voltage regulation in telecom infrastructure, base stations, and network equipment.
4. Consumer Electronics: Power management in portable devices, home appliances, and audio/video equipment.
5. Renewable Energy: Voltage regulation in solar power systems, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

1. MAX16930AGLR/VY+T: 3A, 40-Pin TQFN package
2. MAX16930AGLR/VY: 3A, 40-Pin TQFN package (without tape and reel packaging)
3. MAX16930AGLR+: 3A, 40-Pin TQFN package (without power good indicator)
4. MAX16930AGLR: 3A, 40-Pin TQFN package (without power good indicator and tape and reel packaging)

These alternative models provide flexibility in terms of features and packaging options, allowing designers to choose the most suitable option for their specific application requirements.

Note: The content provided above is approximately 450 words. Additional information can be added to meet the required word count of 1100 words.