MAX16930ATLR/V+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Quiescent Current
• Package: 40-Lead Thin QFN (5mm x 5mm)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 4.5V to 60V
• Output Voltage Range: 0.8V to 90% of VIN
• Maximum Output Current: 1.5A
• Quiescent Current: 17µA (typical)
• Switching Frequency: 2.2MHz
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16930ATLR/V+T has a total of 40 pins. The pin configuration is as follows:

1. VIN
2. EN
3. FB
4. AGND
5. PGND
6. SW
7. BST
8. VCC
9. VCC
10. VCC
11. VCC
12. VCC
13. VCC
14. VCC
15. VCC
16. VCC
17. VCC
18. VCC
19. VCC
20. VCC
21. VCC
22. VCC
23. VCC
24. VCC
25. VCC
26. VCC
27. VCC
28. VCC
29. VCC
30. VCC
31. VCC
32. VCC
33. VCC
34. VCC
35. VCC
36. VCC
37. VCC
38. VCC
39. VCC
40. VCC

Functional Features

• High Efficiency: The MAX16930ATLR/V+T offers high efficiency power conversion, minimizing energy loss and maximizing battery life.
• Low Quiescent Current: With a low quiescent current of only 17µA, the device reduces power consumption during standby or idle modes.
• Wide Input Voltage Range: The IC can handle input voltages ranging from 4.5V to 60V, making it suitable for various applications.
• Adjustable Output Voltage: The output voltage can be adjusted from 0.8V up to 90% of the input voltage, providing flexibility in different scenarios.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low quiescent current - Wide input voltage range - Adjustable output voltage

Disadvantages: - None identified

Working Principles

The MAX16930ATLR/V+T is a voltage regulator that converts an input voltage into a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The device operates by continuously switching an internal power transistor on and off at a high frequency. This allows for efficient power transfer from the input to the output while minimizing energy loss.

Detailed Application Field Plans

The MAX16930ATLR/V+T is commonly used in various applications, including:

1. Automotive Electronics: The IC is suitable for automotive electronics systems, such as infotainment systems, advanced driver-assistance systems (ADAS), and lighting control modules.
2. Industrial Equipment: It can be used in industrial equipment, such as motor drives, factory automation systems, and power supplies.
3. Telecommunications: The device finds application in telecommunications equipment, including base stations, routers, and network switches.
4. Consumer Electronics: It is also utilized in consumer electronics products like smart home devices, portable audio players, and wearable devices.

Detailed and Complete Alternative Models

1. MAX16930ATLR/V+T: The specific model being discussed in this entry.
2. MAX16930ATL+: Similar to the discussed model, but without the V+T suffix.
3. MAX16930ATLR+: Similar to the discussed model, but without the V+T suffix and with a different package option.
4. MAX16930ATL/V+: Similar to the discussed model, but with a different package option.

These alternative models offer similar functionality and characteristics, providing options for different requirements and preferences.

Word count: 446 words