MAX16930BATLS/V+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Quiescent Current
• Package: 48-TQFN (7mm x 7mm)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 4.5V to 60V
• Output Voltage Range: 0.8V to 55V
• Maximum Output Current: 3A
• Quiescent Current: 17µA
• Switching Frequency: 1MHz
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16930BATLS/V+T has a total of 48 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage
6. PGND: Power Ground
7. SW: Switch Node
8. BST: Boost Capacitor Connection
9. SS/TRK: Soft-Start/Tracking Control
10. COMP: Compensation Pin
11. AGND: Analog Ground
12. CLK: Clock Synchronization
13. SYNC: Synchronization Input
14. MODE: Mode Selection
15. SS/TRK: Soft-Start/Tracking Control
16. VCC: Supply Voltage

(Note: The remaining pins are not listed for brevity.)

Functional Features

• Wide input voltage range allows for versatile applications.
• High efficiency ensures minimal power loss.
• Low quiescent current enables energy-saving operation.
• Integrated protection features such as overvoltage, undervoltage, and overcurrent protection.
• Adjustable output voltage provides flexibility in various applications.
• Soft-start and tracking control for smooth power-up and shutdown sequences.

Advantages

• High efficiency results in reduced power consumption.
• Wide input voltage range allows for compatibility with different power sources.
• Integrated protection features enhance system reliability.
• Adjustable output voltage provides versatility.
• Compact package size saves board space.

Disadvantages

• Limited maximum output current may not be suitable for high-power applications.
• Higher cost compared to non-integrated voltage regulators.
• Requires careful thermal management due to high power dissipation.

Working Principles

The MAX16930BATLS/V+T is a voltage regulator that converts the input voltage to a regulated output voltage. It utilizes a switching topology to achieve high efficiency. The integrated control circuitry adjusts the duty cycle of the internal switch to maintain the desired output voltage. The device also incorporates protection features to safeguard against abnormal operating conditions.

Detailed Application Field Plans

The MAX16930BATLS/V+T is commonly used in various applications, including:

1. Automotive Electronics: Power supply for infotainment systems, lighting modules, and sensors.
2. Industrial Automation: Voltage regulation for motor drives, PLCs, and control systems.
3. Telecommunications: Power management for base stations, routers, and network equipment.
4. Consumer Electronics: Voltage regulation for portable devices, home appliances, and audio/video systems.

Detailed and Complete Alternative Models

1. MAX16930BATLS/V+T: 3A, 48-TQFN package
2. MAX16930BATLS/V+T/NOPB: 3A, 48-TQFN package (RoHS compliant)
3. MAX16930BATLS/V+T/ESCROW: 3A, 48-TQFN package (Escrow service available)

(Note: The list above includes only a few alternative models for reference.)

In conclusion, the MAX16930BATLS/V+T is a versatile voltage regulator with a wide input voltage range and high efficiency. It offers various protection features and adjustable output voltage, making it suitable for diverse applications in automotive, industrial, telecommunications, and consumer electronics sectors. While it has limitations in terms of maximum output current and cost, its advantages outweigh the disadvantages, making it a popular choice among designers.