Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX16932ATIS/V+T
Ətraflı Baxın Məlumat vərəqləri

MAX16932ATIS/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: Thin Shrink Small Outline Package (TSSOP)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 1A
  • Quiescent Current: 17µA
  • Switching Frequency: 2.2MHz
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX16932ATIS/V+T has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Pin
  4. EN: Enable Pin
  5. SW: Switch Node
  6. PGND: Power Ground
  7. VOUT: Output Voltage
  8. SS/TR: Soft-Start/Tracking Pin

Functional Features

  • High Efficiency: The MAX16932ATIS/V+T offers high efficiency, ensuring minimal power loss during voltage regulation.
  • Low Quiescent Current: With a quiescent current of only 17µA, the IC minimizes power consumption when in standby mode.
  • Wide Input Voltage Range: The device can accept input voltages ranging from 4.5V to 36V, making it suitable for various applications.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power dissipation. - Low quiescent current enables energy-saving operation. - Wide input voltage range provides flexibility in different power supply scenarios.

Disadvantages: - Limited maximum output current of 1A may not be sufficient for high-power applications. - The TSSOP package may require careful handling during assembly.

Working Principles

The MAX16932ATIS/V+T is a voltage regulator IC that converts an input voltage to a regulated output voltage. It utilizes a switching regulator architecture to achieve high efficiency. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) controls the device's operation, allowing it to enter low-power standby mode when disabled.

Detailed Application Field Plans

The MAX16932ATIS/V+T is commonly used in various applications, including but not limited to:

  1. Automotive Electronics: Power management for infotainment systems, lighting modules, and other automotive components.
  2. Industrial Automation: Voltage regulation for motor control systems, sensors, and communication modules.
  3. Consumer Electronics: Power supply for portable devices, home appliances, and audio/video equipment.
  4. Telecommunications: Voltage regulation for networking equipment, routers, and data centers.

Detailed and Complete Alternative Models

  1. MAX16930ATI/V+T: Similar specifications and features, but with a lower maximum output current of 500mA.
  2. MAX16931ATI/V+T: Higher maximum output current of 2A, suitable for more power-demanding applications.
  3. MAX16933ATI/V+T: Offers adjustable output voltage range, providing greater flexibility in voltage selection.

These alternative models offer different trade-offs in terms of output current capability and voltage range, allowing users to choose the most suitable option for their specific requirements.

Word count: 411 words

Texniki həllərdə MAX16932ATIS/V+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the input voltage range of MAX16932ATIS/V+T?
    - The input voltage range of MAX16932ATIS/V+T is 4.5V to 36V.

  2. What is the maximum output current of MAX16932ATIS/V+T?
    - MAX16932ATIS/V+T can deliver a maximum output current of 3A.

  3. Can MAX16932ATIS/V+T be used in automotive applications?
    - Yes, MAX16932ATIS/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX16932ATIS/V+T?
    - The typical efficiency of MAX16932ATIS/V+T is around 95%.

  5. Does MAX16932ATIS/V+T have overcurrent protection?
    - Yes, MAX16932ATIS/V+T features overcurrent protection.

  6. Is thermal shutdown included in MAX16932ATIS/V+T?
    - Yes, MAX16932ATIS/V+T includes thermal shutdown protection.

  7. What is the operating temperature range of MAX16932ATIS/V+T?
    - The operating temperature range of MAX16932ATIS/V+T is -40°C to +125°C.

  8. Can MAX16932ATIS/V+T be used in LED lighting applications?
    - Yes, MAX16932ATIS/V+T is suitable for LED lighting applications.

  9. Does MAX16932ATIS/V+T require an external compensation network?
    - No, MAX16932ATIS/V+T does not require an external compensation network.

  10. What package type is MAX16932ATIS/V+T available in?
    - MAX16932ATIS/V+T is available in a 16-pin TQFN package.