Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX16992ATCE/V+T
Ətraflı Baxın Məlumat vərəqləri

MAX16992ATCE/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TQFN-EP (Thin Quad Flat No-Lead Exposed Pad)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 90% of VIN
  • Maximum Output Current: 1A
  • Switching Frequency: 100kHz to 2.2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16992ATCE/V+T has a total of 20 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. EN: Enable Pin
  3. FB: Feedback Pin
  4. GND: Ground
  5. SW: Switch Node
  6. LX: Inductor Connection
  7. PGND: Power Ground
  8. VCC: Supply Voltage
  9. SS/TRK: Soft-Start/Tracking Pin
  10. SS/TRK: Soft-Start/Tracking Pin
  11. SS/TRK: Soft-Start/Tracking Pin
  12. SS/TRK: Soft-Start/Tracking Pin
  13. SS/TRK: Soft-Start/Tracking Pin
  14. SS/TRK: Soft-Start/Tracking Pin
  15. SS/TRK: Soft-Start/Tracking Pin
  16. SS/TRK: Soft-Start/Tracking Pin
  17. SS/TRK: Soft-Start/Tracking Pin
  18. SS/TRK: Soft-Start/Tracking Pin
  19. SS/TRK: Soft-Start/Tracking Pin
  20. SS/TRK: Soft-Start/Tracking Pin

Functional Features

  • Wide Input Voltage Range allows for versatile applications
  • High Efficiency ensures minimal power loss
  • Low Power Consumption reduces energy usage
  • Integrated Soft-Start and Tracking functionality for smooth operation
  • Overcurrent and Thermal Protection for enhanced safety

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources - High efficiency results in reduced heat dissipation and longer battery life - Integrated protection features enhance system reliability

Disadvantages: - Limited maximum output current may restrict certain high-power applications - Higher cost compared to non-integrated voltage regulators

Working Principles

The MAX16992ATCE/V+T is a voltage regulator that converts the input voltage to a regulated output voltage. It utilizes a switching topology to achieve high efficiency. The integrated control circuitry adjusts the duty cycle of the switching transistor to maintain the desired output voltage. The soft-start and tracking functionality ensure a controlled startup and tracking of the output voltage during load transients.

Detailed Application Field Plans

The MAX16992ATCE/V+T is commonly used in the following applications:

  1. Automotive Electronics: Power management for various automotive systems such as infotainment, lighting, and sensors.
  2. Industrial Automation: Voltage regulation for industrial control systems, motor drives, and communication modules.
  3. Consumer Electronics: Power supply for portable devices, home appliances, and audio/video equipment.
  4. Telecommunications: Voltage regulation for telecom infrastructure, base stations, and network equipment.

Detailed and Complete Alternative Models

  1. MAX16993ATCE/V+T: Similar specifications and pin configuration, but with higher maximum output current (2A).
  2. MAX16994ATCE/V+T: Similar specifications and pin configuration, but with lower input voltage range (4.5V to 36V).
  3. MAX16995ATCE/V+T: Similar specifications and pin configuration, but with higher switching frequency (2.2MHz to 4MHz).

(Note: The above alternative models are for reference only and may have different characteristics and packaging options.)

Word count: 430 words

Texniki həllərdə MAX16992ATCE/V+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the input voltage range of MAX16992ATCE/V+T?
    - The input voltage range of MAX16992ATCE/V+T is 4.5V to 36V.

  2. What is the maximum output current of MAX16992ATCE/V+T?
    - The maximum output current of MAX16992ATCE/V+T is 3A.

  3. Can MAX16992ATCE/V+T be used in automotive applications?
    - Yes, MAX16992ATCE/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX16992ATCE/V+T?
    - The typical efficiency of MAX16992ATCE/V+T is 95%.

  5. Does MAX16992ATCE/V+T have overcurrent protection?
    - Yes, MAX16992ATCE/V+T features overcurrent protection.

  6. Is thermal shutdown included in MAX16992ATCE/V+T?
    - Yes, MAX16992ATCE/V+T includes thermal shutdown.

  7. What is the operating temperature range of MAX16992ATCE/V+T?
    - The operating temperature range of MAX16992ATCE/V+T is -40°C to +125°C.

  8. Can MAX16992ATCE/V+T be used in LED lighting applications?
    - Yes, MAX16992ATCE/V+T can be used in LED lighting applications.

  9. Does MAX16992ATCE/V+T require an external compensation network?
    - No, MAX16992ATCE/V+T does not require an external compensation network.

  10. What package type is MAX16992ATCE/V+T available in?
    - MAX16992ATCE/V+T is available in a 16-pin TQFN package.