Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX16993ATJC/V+T
Ətraflı Baxın Məlumat vərəqləri

MAX16993ATJC/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: TQFN-32
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 1.2V to 36V
  • Maximum Output Current: 3A
  • Quiescent Current: 20µA
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16993ATJC/V+T has a total of 32 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. FB: Feedback pin
  4. GND: Ground pin
  5. PGND: Power ground pin
  6. SW: Switching node pin
  7. VOUT: Output voltage pin
  8. SS/TRK: Soft-start/Tracking pin
  9. COMP: Compensation pin
  10. BST: Bootstrap pin
  11. AGND: Analog ground pin
  12. NC: No connection pin
  13. NC: No connection pin
  14. NC: No connection pin
  15. NC: No connection pin
  16. NC: No connection pin
  17. NC: No connection pin
  18. NC: No connection pin
  19. NC: No connection pin
  20. NC: No connection pin
  21. NC: No connection pin
  22. NC: No connection pin
  23. NC: No connection pin
  24. NC: No connection pin
  25. NC: No connection pin
  26. NC: No connection pin
  27. NC: No connection pin
  28. NC: No connection pin
  29. NC: No connection pin
  30. NC: No connection pin
  31. NC: No connection pin
  32. NC: No connection pin

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Low quiescent current enables energy-saving operation.
  • Integrated protection features such as overvoltage and overcurrent protection.
  • Soft-start and tracking functionality for smooth startup and shutdown.

Advantages and Disadvantages

Advantages: - Wide input voltage range provides flexibility in various power supply scenarios. - High efficiency results in reduced power consumption and heat dissipation. - Integrated protection features enhance system reliability. - Soft-start and tracking functionality ensure controlled and safe operation.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - TQFN package may require careful handling during assembly.

Working Principles

The MAX16993ATJC/V+T is a voltage regulator IC that converts an input voltage within the range of 4.5V to 60V to a regulated output voltage between 1.2V and 36V. It utilizes a switching regulator topology to achieve high efficiency. The IC incorporates control circuitry, power MOSFETs, and other components to regulate the output voltage while minimizing power loss. Various protection features are integrated to safeguard against overvoltage, overcurrent, and thermal issues.

Detailed Application Field Plans

The MAX16993ATJC/V+T finds applications in various fields, including but not limited to:

  1. Automotive: Power management in automotive systems, such as infotainment systems, lighting, and motor control.
  2. Industrial: Voltage regulation in industrial equipment, including factory automation, robotics, and power supplies.
  3. Telecommunications: Power management for telecom infrastructure, base stations, and network equipment.
  4. Consumer Electronics: Voltage regulation in consumer electronic devices like smartphones, tablets, and portable audio/video players.

Detailed and Complete Alternative Models

  1. MAX16993ATJC/V+T: The specific model being discussed in this entry.
  2. MAX16993ATJ/V+T: Similar to the above model but without the TQFN package.
  3. MAX16993ATJC/V+: Same as the first model but with a different packaging option.
  4. MAX16993ATJ/V+: Similar to the third model but without the TQFN package.

These alternative models offer similar functionality and characteristics, providing options based on specific application requirements.

Word count: 529 words

Texniki həllərdə MAX16993ATJC/V+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the input voltage range of MAX16993ATJC/V+T?
    - The input voltage range of MAX16993ATJC/V+T is 4.5V to 36V.

  2. What is the maximum output current of MAX16993ATJC/V+T?
    - The maximum output current of MAX16993ATJC/V+T is 1.5A.

  3. Can MAX16993ATJC/V+T be used in automotive applications?
    - Yes, MAX16993ATJC/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX16993ATJC/V+T?
    - The typical efficiency of MAX16993ATJC/V+T is 95%.

  5. Does MAX16993ATJC/V+T have overcurrent protection?
    - Yes, MAX16993ATJC/V+T features overcurrent protection.

  6. What is the operating temperature range of MAX16993ATJC/V+T?
    - The operating temperature range of MAX16993ATJC/V+T is -40°C to +125°C.

  7. Is MAX16993ATJC/V+T compatible with both step-up and step-down configurations?
    - Yes, MAX16993ATJC/V+T can be used in both step-up and step-down configurations.

  8. What type of package does MAX16993ATJC/V+T come in?
    - MAX16993ATJC/V+T is available in a 20-pin TQFN package.

  9. Can MAX16993ATJC/V+T be used in LED lighting applications?
    - Yes, MAX16993ATJC/V+T is suitable for LED lighting applications.

  10. Does MAX16993ATJC/V+T have built-in thermal shutdown protection?
    - Yes, MAX16993ATJC/V+T includes built-in thermal shutdown protection.