MAX17082GTL+T

Product Overview

Category: Integrated Circuit (IC)
Use: Power Management
Characteristics: High Efficiency, Low Quiescent Current, Small Package Size
Package: 6-Pin Thin SOT23
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.7V to 5.5V
Output Voltage Range: 1.8V to 3.3V
Maximum Output Current: 300mA
Quiescent Current: 17µA (typical)
Dropout Voltage: 160mV at 100mA
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX17082GTL+T has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
FB: Feedback pin for output voltage regulation
EN: Enable pin to control the regulator's operation
VOUT: Output voltage pin
PGND: Power ground pin

Functional Features

High efficiency power management solution
Low quiescent current for improved battery life
Wide input voltage range for versatile applications
Adjustable output voltage for flexibility
Thermal shutdown and current limit protection

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Small package size allows for space-constrained designs - Wide input voltage range accommodates various power sources - Low quiescent current prolongs battery life

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The MAX17082GTL+T is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V into a regulated output voltage between 1.8V and 3.3V. It achieves this by utilizing a high-efficiency step-down (buck) converter topology. The feedback pin (FB) is used to set the desired output voltage, which can be adjusted using external resistors. The enable pin (EN) controls the operation of the regulator, allowing for power-saving modes when not required.

Detailed Application Field Plans

The MAX17082GTL+T is commonly used in various applications, including but not limited to:

Battery-powered devices: Portable electronics, IoT devices, wearables
Consumer electronics: Smartphones, tablets, digital cameras
Industrial equipment: Sensors, control systems, instrumentation
Automotive electronics: Infotainment systems, lighting modules, navigation devices

Detailed and Complete Alternative Models

LM1117-3.3: Low dropout voltage regulator with fixed 3.3V output
LT1763: Ultra-low noise LDO regulator with adjustable output voltage
TPS62130: High-efficiency synchronous buck converter with adjustable output voltage
AP2112: Low dropout linear regulator with fixed 3.3V output

These alternative models offer similar functionality and can be considered as substitutes for the MAX17082GTL+T depending on specific requirements and design constraints.

Word count: 389

Texniki həllərdə MAX17082GTL+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX17082GTL+T in technical solutions:

Q: What is the MAX17082GTL+T? A: The MAX17082GTL+T is a step-down DC-DC converter with integrated power switches, designed for use in various technical solutions.
Q: What is the input voltage range of the MAX17082GTL+T? A: The input voltage range of the MAX17082GTL+T is typically between 4.5V and 28V.
Q: What is the output voltage range of the MAX17082GTL+T? A: The output voltage range of the MAX17082GTL+T can be adjusted from 0.6V to 90% of the input voltage.
Q: What is the maximum output current of the MAX17082GTL+T? A: The maximum output current of the MAX17082GTL+T is typically 2A.
Q: Can the MAX17082GTL+T operate in a wide temperature range? A: Yes, the MAX17082GTL+T is designed to operate in a temperature range of -40°C to +125°C.
Q: Does the MAX17082GTL+T have built-in protection features? A: Yes, the MAX17082GTL+T includes overcurrent protection, thermal shutdown, and undervoltage lockout features.
Q: Can the MAX17082GTL+T be used in battery-powered applications? A: Yes, the MAX17082GTL+T is suitable for battery-powered applications due to its low quiescent current and high efficiency.
Q: What is the switching frequency of the MAX17082GTL+T? A: The switching frequency of the MAX17082GTL+T is typically 1.2MHz, which helps to minimize the size of external components.
Q: Does the MAX17082GTL+T require any external compensation components? A: No, the MAX17082GTL+T is internally compensated and does not require any external compensation components.
Q: Can the MAX17082GTL+T be used in automotive applications? A: Yes, the MAX17082GTL+T is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.