Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX1723ELT+T
Product Overview
Category
MAX1723ELT+T belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Low dropout voltage
- High output current capability
- Adjustable output voltage
- Thermal shutdown protection
- Short-circuit current limiting
Package
The MAX1723ELT+T comes in a small 6-pin SOT23 package.
Essence
The essence of MAX1723ELT+T is its ability to regulate voltage efficiently and reliably.
Packaging/Quantity
This product is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.25V to 5.5V
- Dropout Voltage: 120mV at 100mA
- Maximum Output Current: 300mA
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
- GND: Ground pin
- FB: Feedback pin for adjusting the output voltage
- EN: Enable pin for turning the regulator on/off
- VOUT: Output voltage pin
- VIN: Input voltage pin
- BYP: Bypass capacitor pin for improved stability
Functional Features
- Low dropout voltage ensures efficient regulation even with low input voltages.
- High output current capability allows for powering various components.
- Adjustable output voltage provides flexibility in different applications.
- Thermal shutdown protection prevents damage due to excessive heat.
- Short-circuit current limiting protects the regulator and connected devices from damage during a short circuit.
Advantages and Disadvantages
Advantages
- Efficient voltage regulation
- Wide input voltage range
- Adjustable output voltage
- Thermal protection
- Short-circuit current limiting
Disadvantages
- Limited maximum output current (300mA)
- Requires external bypass capacitor for stability
Working Principles
The MAX1723ELT+T is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the feedback voltage (FB pin) with a reference voltage, and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
The MAX1723ELT+T can be used in various applications, including: 1. Battery-powered devices 2. Portable electronic devices 3. Automotive electronics 4. Industrial control systems 5. Communication equipment
Detailed and Complete Alternative Models
Some alternative models to MAX1723ELT+T are: 1. LM1117-ADJ 2. LT1763-3.3 3. ADP3339AKCZ-3.3-R7 4. MCP1700T-3302E/TT
These models offer similar functionality and can be considered as alternatives based on specific requirements.
Word count: 387 words
Texniki həllərdə MAX1723ELT+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of MAX1723ELT+T in technical solutions:
Q: What is the MAX1723ELT+T? A: The MAX1723ELT+T is a low-dropout linear regulator IC designed for use in various technical solutions.
Q: What is the input voltage range of the MAX1723ELT+T? A: The input voltage range of the MAX1723ELT+T is typically between 2.5V and 6.5V.
Q: What is the output voltage range of the MAX1723ELT+T? A: The output voltage range of the MAX1723ELT+T can be adjusted from 1.25V to 5.5V using external resistors.
Q: What is the maximum output current of the MAX1723ELT+T? A: The maximum output current of the MAX1723ELT+T is typically 150mA.
Q: Is the MAX1723ELT+T suitable for battery-powered applications? A: Yes, the MAX1723ELT+T is well-suited for battery-powered applications due to its low dropout voltage and low quiescent current.
Q: Can the MAX1723ELT+T handle input voltage fluctuations? A: Yes, the MAX1723ELT+T has built-in protection features like thermal shutdown and overcurrent protection to handle input voltage fluctuations.
Q: Does the MAX1723ELT+T require any external components for operation? A: Yes, the MAX1723ELT+T requires a few external components like input/output capacitors and resistors to set the desired output voltage.
Q: Can the MAX1723ELT+T be used in automotive applications? A: Yes, the MAX1723ELT+T is suitable for automotive applications as it can operate over a wide temperature range and has built-in protection features.
Q: What is the typical dropout voltage of the MAX1723ELT+T? A: The typical dropout voltage of the MAX1723ELT+T is around 120mV at 150mA load current.
Q: Is the MAX1723ELT+T available in different package options? A: Yes, the MAX1723ELT+T is available in a small SOT-23 package, which is commonly used in many electronic devices.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.