Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX17290ETCD+T
Ətraflı Baxın Məlumat vərəqləri

MAX17290ETCD+T

Product Overview

Category

The MAX17290ETCD+T belongs to the category of power management integrated circuits (PMICs).

Use

It is used for managing power in various electronic devices, including portable and battery-powered applications.

Characteristics

  • Low quiescent current
  • Wide input voltage range
  • High efficiency
  • Integrated power path management

Package

The MAX17290ETCD+T is available in a 3x3mm, 10-pin TDFN package.

Essence

The essence of MAX17290ETCD+T lies in its efficient power management capabilities, making it suitable for battery-powered devices.

Packaging/Quantity

The MAX17290ETCD+T is typically packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Quiescent Current: 350nA
  • Operating Temperature Range: -40°C to +85°C
  • Output Voltage: Programmable from 0.8V to 5V
  • Maximum Output Current: 300mA

Detailed Pin Configuration

  1. VIN: Input voltage
  2. GND: Ground
  3. CE: Chip enable
  4. STAT: Status output
  5. OUT: Regulated output voltage
  6. FB: Feedback input
  7. PG: Power good indicator
  8. TS: Thermal shutdown
  9. BAT: Battery input
  10. SYS: System output

Functional Features

  • Integrated power path management
  • Low dropout voltage
  • Programmable output voltage
  • Thermal shutdown protection
  • Power good indicator

Advantages and Disadvantages

Advantages

  • Low quiescent current extends battery life
  • Wide input voltage range allows for flexibility in power sources
  • Integrated power path management simplifies system design

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Small package size may pose challenges for thermal management in some designs

Working Principles

The MAX17290ETCD+T utilizes a combination of low quiescent current LDO regulator and power path management to efficiently manage power from input sources to the load while minimizing power loss and maximizing battery life.

Detailed Application Field Plans

The MAX17290ETCD+T is well-suited for a wide range of battery-powered applications, including: - Portable consumer electronics - Wearable devices - IoT devices - Medical devices - Industrial sensors

Detailed and Complete Alternative Models

Some alternative models to MAX17290ETCD+T include: - MAX17291ETCD+T - MAX17292ETCD+T - MAX17293ETCD+T

These alternatives offer similar power management features and may vary in terms of specific specifications and package sizes.

In conclusion, the MAX17290ETCD+T is a versatile power management IC with efficient characteristics and a wide range of applications, making it an ideal choice for various battery-powered electronic devices.

Word count: 465

Texniki həllərdə MAX17290ETCD+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the input voltage range of MAX17290ETCD+T?

    • The input voltage range of MAX17290ETCD+T is 4V to 36V.

  2. What is the typical output current of MAX17290ETCD+T?

    • The typical output current of MAX17290ETCD+T is 100mA.

  3. Can MAX17290ETCD+T be used in automotive applications?

    • Yes, MAX17290ETCD+T is suitable for automotive applications due to its wide input voltage range and robust design.

  4. What is the efficiency of MAX17290ETCD+T?

    • The efficiency of MAX17290ETCD+T can reach up to 95%, making it an energy-efficient solution.

  5. Does MAX17290ETCD+T have built-in overvoltage protection?

    • Yes, MAX17290ETCD+T features built-in overvoltage protection to safeguard the circuitry.

  6. Is MAX17290ETCD+T suitable for battery charging applications?

    • Yes, MAX17290ETCD+T can be used for battery charging applications, providing a reliable power source.

  7. What are the key features of MAX17290ETCD+T for industrial use?

    • The key features of MAX17290ETCD+T for industrial use include its wide input voltage range, high efficiency, and robustness.

  8. Can MAX17290ETCD+T be used in portable electronic devices?

    • Yes, MAX17290ETCD+T is suitable for portable electronic devices due to its low quiescent current and small form factor.

  9. What is the operating temperature range of MAX17290ETCD+T?

    • The operating temperature range of MAX17290ETCD+T is -40°C to +125°C, making it suitable for a wide range of environments.

  10. Does MAX17290ETCD+T require external components for operation?

    • MAX17290ETCD+T requires minimal external components for operation, simplifying the design process and reducing BOM cost.