Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX17292EUBA+T
Ətraflı Baxın Məlumat vərəqləri

MAX17292EUBA+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-efficiency, Low-power consumption
  • Package: µMAX®
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel / 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 300mA
  • Quiescent Current: 6µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX17292EUBA+T has the following pin configuration:

  1. GND: Ground
  2. EN: Enable Pin
  3. FB: Feedback Pin
  4. VIN: Input Voltage Pin
  5. VOUT: Output Voltage Pin

Functional Features

  • High Efficiency: The MAX17292EUBA+T offers high efficiency, ensuring minimal power loss during voltage regulation.
  • Low Power Consumption: With a quiescent current of only 6µA, this IC minimizes power consumption in standby mode.
  • Wide Input and Output Voltage Range: The input voltage range of 2.5V to 5.5V and output voltage range of 0.8V to 3.6V make it suitable for various applications.
  • Enable Pin: The EN pin allows for easy control of the device's operation.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power loss. - Low power consumption extends battery life. - Wide input and output voltage range provide versatility. - Enable pin enables convenient device control.

Disadvantages: - Limited maximum output current of 300mA may not be suitable for high-power applications. - Operating temperature range of -40°C to +85°C may not be suitable for extreme environments.

Working Principles

The MAX17292EUBA+T is a voltage regulator IC that regulates the input voltage to a desired output voltage. It achieves this by utilizing an internal control loop that adjusts the duty cycle of an integrated switch. This control loop ensures that the output voltage remains stable even with variations in the input voltage and load conditions.

Detailed Application Field Plans

The MAX17292EUBA+T finds application in various fields, including but not limited to: 1. Portable Electronics: It can be used in smartphones, tablets, and wearable devices to regulate power supply efficiently. 2. IoT Devices: The low power consumption and wide voltage range make it suitable for IoT applications such as sensors and wireless modules. 3. Battery-Powered Systems: It can be utilized in battery-powered systems like handheld devices, medical devices, and remote controls to extend battery life.

Detailed and Complete Alternative Models

  1. MAX17293EUBA+T: Similar to MAX17292EUBA+T, but with a higher maximum output current of 500mA.
  2. MAX17294EUBA+T: Similar to MAX17292EUBA+T, but with a wider input voltage range of 2.5V to 6.5V.
  3. MAX17295EUBA+T: Similar to MAX17292EUBA+T, but with a lower quiescent current of 4µA.

These alternative models provide options with varying specifications to suit different application requirements.

Word count: 315 words

Texniki həllərdə MAX17292EUBA+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX17292EUBA+T in technical solutions:

  1. Q: What is the MAX17292EUBA+T? A: The MAX17292EUBA+T is a highly integrated fuel gauge IC (Integrated Circuit) designed for accurately measuring the remaining capacity of single-cell lithium-ion/polymer batteries.

  2. Q: What is the operating voltage range of the MAX17292EUBA+T? A: The operating voltage range of the MAX17292EUBA+T is from 2.7V to 4.5V.

  3. Q: Can the MAX17292EUBA+T be used with different battery chemistries? A: No, the MAX17292EUBA+T is specifically designed for use with single-cell lithium-ion/polymer batteries.

  4. Q: What is the accuracy of the MAX17292EUBA+T? A: The MAX17292EUBA+T has an accuracy of ±1% for voltage measurement and ±7.5% for current measurement.

  5. Q: Does the MAX17292EUBA+T support temperature monitoring? A: Yes, the MAX17292EUBA+T includes an internal temperature sensor for accurate temperature monitoring.

  6. Q: Can the MAX17292EUBA+T communicate with a microcontroller? A: Yes, the MAX17292EUBA+T supports I2C communication, allowing it to interface with a microcontroller or other devices.

  7. Q: What is the typical standby current consumption of the MAX17292EUBA+T? A: The typical standby current consumption of the MAX17292EUBA+T is 8µA.

  8. Q: Does the MAX17292EUBA+T have built-in protection features? A: Yes, the MAX17292EUBA+T includes overvoltage, undervoltage, and overcurrent protection features to ensure safe battery operation.

  9. Q: Can the MAX17292EUBA+T be used in portable devices? A: Yes, the small form factor and low power consumption of the MAX17292EUBA+T make it suitable for use in portable devices such as smartphones, tablets, and wearables.

  10. Q: Is there any evaluation kit available for the MAX17292EUBA+T? A: Yes, Maxim Integrated provides an evaluation kit (MAX17292EVKIT) that allows users to easily evaluate and test the functionality of the MAX17292EUBA+T in their applications.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.