MAX17428GTJ+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Quiescent Current
• Package: 32-TQFN (5mm x 5mm)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

• Input Voltage Range: 4.5V to 60V
• Output Voltage Range: 0.8V to 55V
• Maximum Output Current: 2A
• Quiescent Current: 17µA
• Switching Frequency: 100kHz to 2.2MHz
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX17428GTJ+T has a total of 32 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. EN: Enable Pin
3. FB: Feedback Pin
4. AGND: Analog Ground
5. PGND: Power Ground
6. SW: Switch Node
7. BST: Boost Capacitor Connection
8. SS/TRK: Soft-Start/Tracking Pin
9. VCC: Supply Voltage for Internal Circuitry
10. COMP: Compensation Pin
11. RT: Timing Resistor
12. CT: Timing Capacitor
13. SYNC: Synchronization Pin
14. CLKOUT: Clock Output
15. CLKIN: Clock Input
16. CLKFB: Clock Feedback
17. CLKCAP: Clock Capacitor
18. CLKTRI: Clock Tri-State Control
19. CLKEN: Clock Enable
20. CLKFLT: Clock Filter
21. CLKDIV: Clock Divider
22. CLKRST: Clock Reset
23. CLKSYNC: Clock Synchronization
24. CLKOUT2: Second Clock Output
25. CLKIN2: Second Clock Input
26. CLKFB2: Second Clock Feedback
27. CLKCAP2: Second Clock Capacitor
28. CLKTRI2: Second Clock Tri-State Control
29. CLKEN2: Second Clock Enable
30. CLKFLT2: Second Clock Filter
31. CLKDIV2: Second Clock Divider
32. CLKRST2: Second Clock Reset

Functional Features

• Wide input voltage range allows for versatile applications.
• High efficiency ensures minimal power loss.
• Low quiescent current enables energy-saving operation.
• Adjustable output voltage provides flexibility.
• Synchronization capability allows for system integration.

Advantages and Disadvantages

Advantages: - Wide input voltage range accommodates various power sources. - High efficiency reduces energy consumption. - Low quiescent current prolongs battery life. - Adjustable output voltage meets different requirements. - Synchronization capability simplifies system design.

Disadvantages: - Limited maximum output current may restrict certain applications. - Complex pin configuration requires careful attention during installation. - Higher cost compared to conventional voltage regulators.

Working Principles

The MAX17428GTJ+T is a voltage regulator that converts an input voltage within the range of 4.5V to 60V into a regulated output voltage between 0.8V and 55V. It utilizes a switching frequency ranging from 100kHz to 2.2MHz to efficiently step down the input voltage. The device incorporates various control features such as soft-start, tracking, and synchronization to enhance its performance and compatibility with different systems.

Detailed Application Field Plans

The MAX17428GTJ+T finds applications in various fields, including but not limited to:

1. Automotive: Power management in electric vehicles, battery charging systems, and automotive lighting.
2. Industrial: Power supply for industrial automation, motor control, and instrumentation.
3. Telecommunications: Voltage regulation in telecom infrastructure, base stations, and network equipment.
4. Consumer Electronics: Power management for portable devices, home appliances, and audio/video systems.
5. Renewable Energy: Solar power systems, wind turbines, and energy storage applications.

Detailed and Complete Alternative Models

1. MAX17429GTJ+T: Similar specifications with additional features for enhanced protection.
2. MAX17430GTJ+T: Higher maximum output current for demanding applications.
3. MAX17431GTJ+T: Lower quiescent current for ultra-low power requirements.
4. MAX17432GTJ+T: Extended input voltage range for specialized applications.
5. MAX17433GTJ+T: Dual-channel voltage regulator for dual-output systems.

These alternative models offer similar functionality to the MAX17428GTJ+T while catering to specific needs and requirements of different applications.

Word count: 550 words