Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX1792EUA33/V+
Ətraflı Baxın Məlumat vərəqləri

MAX1792EUA33/V+ - English Editing Encyclopedia Entry

Product Overview

Category

The MAX1792EUA33/V+ belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

The MAX1792EUA33/V+ is available in a small SOT23-8 package.

Essence

The essence of the MAX1792EUA33/V+ lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying depending on the supplier.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 3.3V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX1792EUA33/V+ has the following pin configuration:

  1. GND (Ground)
  2. IN (Input Voltage)
  3. EN (Enable)
  4. FB (Feedback)
  5. NC (No Connection)
  6. OUT (Output Voltage)
  7. NC (No Connection)
  8. VCC (Supply Voltage)

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable/disable control
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small package size allows for space-saving designs
  • Wide input voltage range enables compatibility with various power sources
  • Low quiescent current minimizes power consumption
  • Overcurrent and short-circuit protection enhance system reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may affect efficiency in low input voltage scenarios

Working Principles

The MAX1792EUA33/V+ operates as a linear voltage regulator. It regulates the output voltage by comparing the feedback voltage with a reference voltage. The internal circuitry adjusts the pass transistor to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

The MAX1792EUA33/V+ finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MAX1792EUA33/V+ include: - LM1117-3.3 - LT1763-3.3 - MCP1703-3302E/DB

These alternatives can be considered based on specific requirements and design constraints.

In conclusion, the MAX1792EUA33/V+ is a voltage regulator that provides stable and regulated voltage output for a wide range of electronic applications. Its compact size, low power consumption, and protective features make it a versatile choice for various industries.

Texniki həllərdə MAX1792EUA33/V+ tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the input voltage range of MAX1792EUA33/V+?
    - The input voltage range of MAX1792EUA33/V+ is 2.5V to 5.5V.

  2. What is the output voltage of MAX1792EUA33/V+?
    - The output voltage of MAX1792EUA33/V+ is fixed at 3.3V.

  3. What is the maximum output current of MAX1792EUA33/V+?
    - The maximum output current of MAX1792EUA33/V+ is 250mA.

  4. Can MAX1792EUA33/V+ be used in battery-powered applications?
    - Yes, MAX1792EUA33/V+ can be used in battery-powered applications due to its low input voltage range.

  5. Is MAX1792EUA33/V+ suitable for low-power IoT devices?
    - Yes, MAX1792EUA33/V+ is suitable for low-power IoT devices due to its low quiescent current and small package size.

  6. Does MAX1792EUA33/V+ have built-in overcurrent protection?
    - Yes, MAX1792EUA33/V+ has built-in overcurrent protection to safeguard the load and the regulator.

  7. Can MAX1792EUA33/V+ operate in harsh industrial environments?
    - Yes, MAX1792EUA33/V+ is designed to operate in harsh industrial environments with its wide temperature range and robust design.

  8. What are the typical applications of MAX1792EUA33/V+?
    - Typical applications of MAX1792EUA33/V+ include portable devices, sensors, and low-power microcontroller systems.

  9. Is MAX1792EUA33/V+ available in a lead-free package?
    - Yes, MAX1792EUA33/V+ is available in a lead-free, RoHS-compliant package.

  10. Can MAX1792EUA33/V+ be used as a drop-in replacement for other linear regulators?
    - Yes, MAX1792EUA33/V+ can be used as a drop-in replacement for other linear regulators with similar specifications, making it easy to upgrade existing designs.