Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX1947ETA18+

MAX1947ETA18+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX1947ETA18+ belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The MAX1947ETA18+ comes in a small SOT23 package.
  • Essence: It is a high-efficiency, low-dropout linear regulator.
  • Packaging/Quantity: The product is typically sold in reels or tubes containing a specific quantity.

Specifications

The specifications of MAX1947ETA18+ are as follows:

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage: 1.8V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA (typical)
  • Line Regulation: ±0.05% (typical)
  • Load Regulation: ±0.15% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX1947ETA18+ has the following pin configuration:

  1. GND: Ground pin
  2. IN: Input voltage pin
  3. EN: Enable pin
  4. OUT: Output voltage pin

Functional Features

The functional features of MAX1947ETA18+ include:

  • High efficiency and low dropout voltage
  • Low quiescent current
  • Excellent line and load regulation
  • Thermal shutdown protection
  • Short-circuit and reverse-current protection

Advantages and Disadvantages

Advantages: - High efficiency ensures minimal power loss - Low dropout voltage allows for reliable operation even with low input voltages - Excellent line and load regulation provide stable output voltage - Thermal shutdown protection prevents damage due to excessive heat - Short-circuit and reverse-current protection enhance overall reliability

Disadvantages: - Limited maximum output current (150mA) - Restricted input voltage range (2.5V to 5.5V)

Working Principles

The MAX1947ETA18+ operates as a linear regulator, maintaining a constant output voltage despite variations in the input voltage. It achieves this by using a feedback mechanism that adjusts the internal resistance to compensate for changes in load and line conditions.

Detailed Application Field Plans

The MAX1947ETA18+ finds applications in various fields, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

Some alternative models to MAX1947ETA18+ with similar characteristics and specifications include: - LM1117-1.8 - LT1763-1.8 - MCP1700-1.8

These alternatives can be considered based on specific requirements and availability.

Word count: 305 words

Texniki həllərdə MAX1947ETA18+ tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX1947ETA18+ in technical solutions:

  1. Q: What is the MAX1947ETA18+? A: The MAX1947ETA18+ is a high-efficiency, step-down DC-DC converter with an integrated power switch.

  2. Q: What is the input voltage range of the MAX1947ETA18+? A: The input voltage range of the MAX1947ETA18+ is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of the MAX1947ETA18+? A: The MAX1947ETA18+ provides a fixed output voltage of 1.8V.

  4. Q: What is the maximum output current of the MAX1947ETA18+? A: The MAX1947ETA18+ can deliver up to 500mA of output current.

  5. Q: Can the MAX1947ETA18+ operate in a wide temperature range? A: Yes, the MAX1947ETA18+ is designed to operate in a temperature range of -40°C to +85°C.

  6. Q: Does the MAX1947ETA18+ have built-in protection features? A: Yes, the MAX1947ETA18+ includes overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: Can I use the MAX1947ETA18+ in battery-powered applications? A: Yes, the low quiescent current and high efficiency of the MAX1947ETA18+ make it suitable for battery-powered devices.

  8. Q: Is the MAX1947ETA18+ easy to integrate into my design? A: Yes, the MAX1947ETA18+ is available in a compact, space-saving package and requires minimal external components.

  9. Q: Can I use the MAX1947ETA18+ in automotive applications? A: Yes, the MAX1947ETA18+ is automotive-grade and meets the necessary standards for automotive applications.

  10. Q: Are there any application notes or reference designs available for the MAX1947ETA18+? A: Yes, Maxim Integrated provides application notes and reference designs to help users implement the MAX1947ETA18+ in their designs effectively.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.