Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX1961EEP+T
Ətraflı Baxın Məlumat vərəqləri

MAX1961EEP+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current
  • Package: 20-Pin TQFN
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 500mA
  • Quiescent Current: 30µA
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX1961EEP+T has a total of 20 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. EN: Enable Pin
  3. FB: Feedback Pin
  4. GND: Ground
  5. SW: Switch Node
  6. PGND: Power Ground
  7. VOUT: Output Voltage
  8. COMP: Compensation Pin
  9. SS: Soft-Start Pin
  10. BST: Boost Pin
  11. AGND: Analog Ground
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection
  17. NC: No Connection
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection

Functional Features

  • High Efficiency: The MAX1961EEP+T offers high efficiency power conversion, minimizing energy loss during operation.
  • Low Quiescent Current: With a quiescent current of only 30µA, the device consumes minimal power when in standby or idle mode.
  • Wide Input Voltage Range: The IC can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, providing flexibility in different power supply requirements.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low quiescent current consumption - Wide input voltage range - Adjustable output voltage

Disadvantages: - Limited maximum output current (500mA)

Working Principles

The MAX1961EEP+T is a voltage regulator that operates by converting the input voltage to a regulated output voltage. It utilizes a switching regulator architecture to achieve high efficiency. The device employs a feedback mechanism to continuously monitor and adjust the output voltage to maintain a stable level. The integrated control circuitry ensures proper regulation even under varying load conditions.

Detailed Application Field Plans

The MAX1961EEP+T finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable technology - Industrial equipment

Detailed and Complete Alternative Models

  • MAX1961EEP+: Similar to MAX1961EEP+T, but without tape and reel packaging
  • MAX1961EEP/V+: Variant with extended temperature range (-40°C to +125°C)
  • MAX1961EEP/V+T: Variant with extended temperature range and tape and reel packaging

Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's documentation for a complete list of available options.

Word count: 380 words

Texniki həllərdə MAX1961EEP+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the input voltage range of MAX1961EEP+T?
    - The input voltage range of MAX1961EEP+T is 2.5V to 5.5V.

  2. What is the typical output current of MAX1961EEP+T?
    - The typical output current of MAX1961EEP+T is 600mA.

  3. Can MAX1961EEP+T be used in battery-powered applications?
    - Yes, MAX1961EEP+T is suitable for battery-powered applications due to its low input voltage range and low quiescent current.

  4. What is the efficiency of MAX1961EEP+T at different load conditions?
    - MAX1961EEP+T offers high efficiency across a wide range of load conditions, typically above 90%.

  5. Is MAX1961EEP+T suitable for portable devices?
    - Yes, MAX1961EEP+T is well-suited for portable devices due to its low power consumption and small footprint.

  6. Does MAX1961EEP+T have built-in overcurrent protection?
    - Yes, MAX1961EEP+T features built-in overcurrent protection to safeguard the circuit and load.

  7. Can MAX1961EEP+T operate in a wide temperature range?
    - Yes, MAX1961EEP+T is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  8. What are the key features of MAX1961EEP+T that make it suitable for industrial applications?
    - The key features of MAX1961EEP+T include its wide input voltage range, high efficiency, and robust overcurrent protection, making it suitable for industrial applications.

  9. How does MAX1961EEP+T handle transient voltage spikes?
    - MAX1961EEP+T incorporates transient voltage suppression to protect the load from voltage spikes.

  10. Can MAX1961EEP+T be used in automotive electronics?
    - Yes, MAX1961EEP+T is suitable for automotive electronics applications, offering reliable performance and protection features.