Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX4835ETT18BD2V+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: Low Dropout, High Current, Fixed Output Voltage
- Package: Thin SOT23-6
- Essence: Linear Voltage Regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage: 1.8V
- Dropout Voltage: 120mV at 100mA
- Maximum Output Current: 150mA
- Line Regulation: ±0.05% typical
- Load Regulation: ±0.1% typical
- Quiescent Current: 30µA typical
- Operating Temperature Range: -40°C to +85°C
Pin Configuration
The MAX4835ETT18BD2V+T has a total of six pins arranged as follows:
```
| | --| VOUT GND|-- Pin 1 --| VIN NC |-- Pin 2 --| EN FB |-- Pin 3 --| NC VOUT|-- Pin 4 --| GND VIN |-- Pin 5 --| NC EN |-- Pin 6 |___________| ```
Functional Features
- Low dropout voltage ensures efficient power conversion.
- High current capability allows for powering various components.
- Fixed output voltage provides stable power supply.
- Enable pin allows for easy on/off control.
- Feedback pin enables voltage regulation.
Advantages and Disadvantages
Advantages: - Low dropout voltage minimizes power dissipation. - High current capability supports a wide range of applications. - Fixed output voltage ensures stability in the power supply.
Disadvantages: - Limited output current may not be suitable for high-power applications. - Thin SOT23-6 package may require careful handling during assembly.
Working Principles
The MAX4835ETT18BD2V+T is a linear voltage regulator that regulates the input voltage to a fixed 1.8V output voltage. It operates by using a pass transistor to drop the excess voltage across the regulator, resulting in a stable output voltage. The enable pin allows for easy on/off control of the regulator, while the feedback pin ensures the output voltage remains constant.
Detailed Application Field Plans
The MAX4835ETT18BD2V+T can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the MAX4835ETT18BD2V+T include: - MAX4836ETT18BD2V+T: 1.8V fixed output voltage with higher maximum output current (200mA). - MAX4834ETT18BD2V+T: 1.8V fixed output voltage with lower maximum output current (100mA). - MAX4835ETT25BD2V+T: 2.5V fixed output voltage variant of the MAX4835 series.
These alternative models provide flexibility in terms of output voltage and current requirements.
Word count: 314 words
Texniki həllərdə MAX4835ETT18BD2V+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of MAX4835ETT18BD2V+T in technical solutions:
Q: What is the MAX4835ETT18BD2V+T? A: The MAX4835ETT18BD2V+T is a low-power, high-speed RS-485/RS-422 transceiver.
Q: What is the operating voltage range of the MAX4835ETT18BD2V+T? A: The operating voltage range is from 3.0V to 5.5V.
Q: Can the MAX4835ETT18BD2V+T be used for both RS-485 and RS-422 communication? A: Yes, it can be used for both RS-485 and RS-422 communication.
Q: What is the maximum data rate supported by the MAX4835ETT18BD2V+T? A: The maximum data rate supported is 20Mbps.
Q: Does the MAX4835ETT18BD2V+T have built-in protection features? A: Yes, it has built-in short-circuit and thermal shutdown protection.
Q: Can the MAX4835ETT18BD2V+T operate in half-duplex mode? A: Yes, it can operate in half-duplex mode.
Q: What is the typical supply current of the MAX4835ETT18BD2V+T? A: The typical supply current is 300µA.
Q: Does the MAX4835ETT18BD2V+T support hot-swapping of devices? A: Yes, it supports hot-swapping of devices.
Q: Can the MAX4835ETT18BD2V+T be used in industrial environments? A: Yes, it is suitable for use in industrial environments with its wide temperature range and robustness.
Q: What package does the MAX4835ETT18BD2V+T come in? A: It comes in a 14-pin TDFN package.