Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX5086AATN+
Ətraflı Baxın Məlumat vərəqləri

MAX5086AATN+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX5086AATN+ belongs to the category of integrated circuits (ICs).

Use

The MAX5086AATN+ is primarily used as a voltage regulator in electronic devices.

Characteristics

  • Voltage regulation capability
  • High efficiency
  • Low power consumption
  • Compact package size
  • Wide input voltage range

Package

The MAX5086AATN+ is available in a small outline transistor (SOT) package.

Essence

The essence of MAX5086AATN+ lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

The MAX5086AATN+ is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 500mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX5086AATN+ has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The MAX5086AATN+ ensures a stable output voltage regardless of input voltage fluctuations.
  • Enable control: The EN pin allows for easy on/off control of the voltage regulator.
  • Feedback mechanism: The FB pin provides feedback to maintain the desired output voltage level.
  • Overcurrent protection: The MAX5086AATN+ incorporates overcurrent protection to prevent damage to the circuitry.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows for compatibility with various power sources.
  • Compact package size enables integration into space-constrained designs.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV at 500mA may affect performance in low-voltage scenarios.

Working Principles

The MAX5086AATN+ operates by regulating the input voltage to maintain a stable output voltage. It utilizes feedback control to continuously monitor and adjust the output voltage level, compensating for any variations in the input voltage. This ensures that the connected electronic devices receive a consistent and reliable power supply.

Detailed Application Field Plans

The MAX5086AATN+ finds application in various electronic devices, including but not limited to: 1. Mobile phones 2. Portable media players 3. Wearable devices 4. IoT devices 5. Battery-powered equipment

Detailed and Complete Alternative Models

  1. MAX5086BATN+: Similar to MAX5086AATN+, but with a different package type (SOT23).
  2. MAX5086CATN+: Higher maximum output current (800mA) compared to MAX5086AATN+.
  3. MAX5086DATN+: Lower dropout voltage (150mV at 500mA) than MAX5086AATN+.

These alternative models provide options based on specific requirements and design considerations.

Word count: 345 words

Texniki həllərdə MAX5086AATN+ tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX5086AATN+ in technical solutions:

  1. Q: What is the MAX5086AATN+? A: The MAX5086AATN+ is a high-voltage, current-limited, power-switching regulator designed for various technical applications.

  2. Q: What is the input voltage range of the MAX5086AATN+? A: The input voltage range of the MAX5086AATN+ is typically between 4.5V and 36V.

  3. Q: What is the output voltage range of the MAX5086AATN+? A: The output voltage range of the MAX5086AATN+ can be adjusted from 0.8V to 28V.

  4. Q: What is the maximum output current of the MAX5086AATN+? A: The maximum output current of the MAX5086AATN+ is typically around 2A.

  5. Q: Can the MAX5086AATN+ operate in a wide temperature range? A: Yes, the MAX5086AATN+ is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  6. Q: Does the MAX5086AATN+ have built-in protection features? A: Yes, the MAX5086AATN+ includes built-in features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: Can the MAX5086AATN+ be used in automotive applications? A: Yes, the MAX5086AATN+ is suitable for automotive applications due to its wide input voltage range and robust design.

  8. Q: What type of package does the MAX5086AATN+ come in? A: The MAX5086AATN+ is available in a compact 8-pin TDFN package.

  9. Q: Can the MAX5086AATN+ be used in battery-powered applications? A: Yes, the MAX5086AATN+ can be used in battery-powered applications as it supports low-power operation and has low quiescent current.

  10. Q: Are there any evaluation boards or reference designs available for the MAX5086AATN+? A: Yes, Maxim Integrated provides evaluation boards and reference designs to help users quickly prototype and implement the MAX5086AATN+ in their technical solutions.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.