Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX6373KA
Ətraflı Baxın Məlumat vərəqləri

MAX6373KA

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Reference
  • Characteristics: High precision, low dropout voltage, low temperature coefficient
  • Package: SOT-23
  • Essence: Provides a stable and accurate voltage reference for various electronic applications
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.1%
  • Temperature Coefficient: 10ppm/°C
  • Dropout Voltage: 200mV
  • Supply Voltage Range: 2.7V to 5.5V
  • Quiescent Current: 60µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6373KA has three pins:

  1. VOUT: Output Voltage Pin
  2. GND: Ground Pin
  3. VIN: Input Voltage Pin

Functional Features

  • High Precision: The MAX6373KA provides an initial accuracy of ±0.1%, ensuring precise voltage references.
  • Low Dropout Voltage: With a dropout voltage of only 200mV, the IC can operate efficiently even with low input voltages.
  • Low Temperature Coefficient: The temperature coefficient of 10ppm/°C ensures minimal voltage variations with temperature changes.

Advantages and Disadvantages

Advantages: - High precision and stability - Low dropout voltage allows operation in low voltage conditions - Wide operating temperature range - Small package size for space-constrained applications

Disadvantages: - Limited output voltage options - Relatively high quiescent current compared to some alternatives

Working Principles

The MAX6373KA is based on bandgap voltage reference technology. It utilizes a combination of bipolar and CMOS transistors to generate a stable reference voltage. The bandgap voltage reference compensates for temperature variations, ensuring accurate output voltage across a wide temperature range.

Detailed Application Field Plans

The MAX6373KA is suitable for various applications that require a stable and accurate voltage reference. Some potential application fields include:

  1. Analog-to-Digital Converters (ADCs)
  2. Digital-to-Analog Converters (DACs)
  3. Voltage regulators
  4. Precision instrumentation
  5. Battery-powered devices

Detailed and Complete Alternative Models

  1. MAX6037AA: Offers adjustable output voltage with similar specifications.
  2. LT6656: Provides ultra-low noise performance in addition to high precision.
  3. REF5050: Offers higher output voltage options with comparable accuracy.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 275 words

Texniki həllərdə MAX6373KA tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX6373KA in technical solutions:

  1. Q: What is MAX6373KA? A: MAX6373KA is a voltage monitor and reset circuit that provides power supply monitoring and reset generation for microcontrollers, DSPs, and other digital systems.

  2. Q: What is the operating voltage range of MAX6373KA? A: The operating voltage range of MAX6373KA is from 1.6V to 5.5V.

  3. Q: How does MAX6373KA monitor the power supply? A: MAX6373KA monitors the power supply by comparing the monitored voltage with a preset threshold voltage. It generates a reset signal when the voltage falls below the threshold.

  4. Q: Can I adjust the threshold voltage of MAX6373KA? A: Yes, the threshold voltage of MAX6373KA can be adjusted using external resistors.

  5. Q: What is the typical reset timeout period of MAX6373KA? A: The typical reset timeout period of MAX6373KA is 140ms.

  6. Q: Does MAX6373KA have an open-drain output? A: Yes, MAX6373KA has an open-drain RESET output that can be pulled low during a reset condition.

  7. Q: Can MAX6373KA operate in a wide temperature range? A: Yes, MAX6373KA is designed to operate in a wide temperature range from -40°C to +85°C.

  8. Q: Is MAX6373KA suitable for battery-powered applications? A: Yes, MAX6373KA is suitable for battery-powered applications as it has a low quiescent current of typically 5µA.

  9. Q: Can I use MAX6373KA in automotive applications? A: Yes, MAX6373KA is automotive qualified and can be used in automotive applications.

  10. Q: What package options are available for MAX6373KA? A: MAX6373KA is available in a 5-pin SOT23 package and a 6-pin µDFN package.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.