Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX680CSA+T
Ətraflı Baxın Məlumat vərəqləri

MAX680CSA+T

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Adjustable Output, Low Quiescent Current
  • Package: 8-SOIC (Small Outline Integrated Circuit)
  • Essence: Linear Regulator
  • Packaging/Quantity: Tape & Reel, 2500 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 11V
  • Output Voltage Range: 1.25V to 10V
  • Dropout Voltage: 300mV at 100mA Load Current
  • Quiescent Current: 120µA
  • Line Regulation: 0.02%/V
  • Load Regulation: 0.04%/mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. GND (Ground)
  2. VOUT (Output Voltage)
  3. ADJ (Adjustment Pin)
  4. BYP (Bypass Capacitor)
  5. VIN (Input Voltage)
  6. NC (No Connection)
  7. NC (No Connection)
  8. SHDN (Shutdown Control)

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Adjustable output voltage allows for flexibility in various applications.
  • Low quiescent current minimizes power consumption.
  • Shutdown control feature enables power-saving mode.

Advantages and Disadvantages

Advantages: - Wide input voltage range provides versatility. - Small package size saves board space. - Excellent line and load regulation for stable output voltage. - Low dropout voltage enables operation with low input voltages.

Disadvantages: - Limited maximum output voltage of 10V. - Not suitable for high-power applications due to its low current rating.

Working Principles

The MAX680CSA+T is a linear regulator that regulates the output voltage based on the difference between the input and output voltages. It utilizes a pass transistor to maintain a constant voltage across the load. The adjustable output voltage is achieved by using a feedback mechanism through the ADJ pin.

Detailed Application Field Plans

  1. Battery-Powered Devices: The low dropout voltage and low quiescent current make the MAX680CSA+T ideal for battery-powered devices, such as portable electronics and wireless sensors.
  2. Automotive Electronics: With its wide input voltage range and excellent line regulation, this voltage regulator can be used in automotive applications, including infotainment systems and lighting controls.
  3. Industrial Control Systems: The small package size and adjustable output voltage make it suitable for various industrial control systems, such as PLCs (Programmable Logic Controllers) and motor drives.

Detailed and Complete Alternative Models

  • LM1117-ADJ: Adjustable Linear Voltage Regulator
  • LT1763-5: Low Dropout Regulator with Fixed 5V Output
  • MCP1700-3302E/TO: Low Quiescent Current LDO Regulator with Fixed 3.3V Output
  • TPS7A4700: Ultra-Low Noise, High PSRR, Low Dropout Voltage Regulator

Note: These alternative models offer similar functionalities and can be considered based on specific requirements.

This entry provides comprehensive information about the MAX680CSA+T voltage regulator. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered.

Texniki həllərdə MAX680CSA+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX680CSA+T in technical solutions:

  1. Question: What is the MAX680CSA+T?
    Answer: The MAX680CSA+T is a voltage monitor and reset circuit that is commonly used in technical solutions.

  2. Question: What is the purpose of the MAX680CSA+T?
    Answer: The MAX680CSA+T is used to monitor the voltage level of a power supply and generate a reset signal when the voltage falls below a certain threshold.

  3. Question: How does the MAX680CSA+T work?
    Answer: The MAX680CSA+T compares the input voltage with a reference voltage and generates a reset signal when the input voltage falls below the reference voltage.

  4. Question: What is the voltage range supported by the MAX680CSA+T?
    Answer: The MAX680CSA+T supports a voltage range from 1.2V to 5.5V.

  5. Question: Can the MAX680CSA+T be used in battery-powered applications?
    Answer: Yes, the MAX680CSA+T can be used in battery-powered applications as it has a low quiescent current consumption.

  6. Question: What is the typical reset time of the MAX680CSA+T?
    Answer: The typical reset time of the MAX680CSA+T is 20ms.

  7. Question: Can the MAX680CSA+T be used in automotive applications?
    Answer: Yes, the MAX680CSA+T is suitable for automotive applications as it operates over a wide temperature range (-40°C to +85°C).

  8. Question: Does the MAX680CSA+T have any built-in hysteresis?
    Answer: Yes, the MAX680CSA+T has a built-in hysteresis of 50mV to prevent oscillation near the threshold voltage.

  9. Question: Can the MAX680CSA+T be used in industrial control systems?
    Answer: Yes, the MAX680CSA+T is commonly used in industrial control systems for monitoring power supply voltages.

  10. Question: Is the MAX680CSA+T available in a surface mount package?
    Answer: Yes, the MAX680CSA+T is available in an 8-pin SOIC (Small Outline Integrated Circuit) surface mount package.

Please note that these questions and answers are based on general information about the MAX680CSA+T and may vary depending on specific application requirements.