Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX6855UK24D6+T
Ətraflı Baxın Məlumat vərəqləri

MAX6855UK24D6+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 24-Pin TSSOP
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 1.5A
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6855UK24D6+T has a 24-pin TSSOP package with the following pin configuration:

  1. EN (Enable)
  2. FB (Feedback)
  3. GND (Ground)
  4. SW (Switch)
  5. PG (Power Good)
  6. VOUT (Output Voltage)
  7. VOUT (Output Voltage)
  8. VOUT (Output Voltage)
  9. VOUT (Output Voltage)
  10. VOUT (Output Voltage)
  11. VOUT (Output Voltage)
  12. VOUT (Output Voltage)
  13. VOUT (Output Voltage)
  14. VOUT (Output Voltage)
  15. VOUT (Output Voltage)
  16. VOUT (Output Voltage)
  17. VOUT (Output Voltage)
  18. VOUT (Output Voltage)
  19. VOUT (Output Voltage)
  20. VOUT (Output Voltage)
  21. VOUT (Output Voltage)
  22. VOUT (Output Voltage)
  23. VIN (Input Voltage)
  24. VIN (Input Voltage)

Functional Features

  • High efficiency voltage regulation
  • Low power consumption
  • Overcurrent and overtemperature protection
  • Power good indicator
  • Enable/disable control

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power wastage - Wide input voltage range allows for versatile applications - Compact package size saves board space - Power good indicator provides system status feedback

Disadvantages: - Limited output current capacity compared to higher-power regulators - Temperature limitations may restrict use in extreme environments

Working Principles

The MAX6855UK24D6+T is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves high efficiency by utilizing a switching regulator topology. The enable pin (EN) controls the operation of the regulator, allowing it to be turned on or off as needed. The feedback pin (FB) monitors the output voltage and adjusts the internal circuitry to maintain a stable output. Overcurrent and overtemperature protection mechanisms ensure safe operation.

Detailed Application Field Plans

The MAX6855UK24D6+T is commonly used in various electronic devices and systems where efficient power management is crucial. Some application fields include:

  1. Mobile Devices: Smartphones, tablets, portable media players.
  2. IoT Devices: Wearable devices, smart home automation systems.
  3. Industrial Equipment: Sensors, actuators, control systems.
  4. Automotive Electronics: Infotainment systems, navigation units.
  5. Medical Devices: Portable medical equipment, patient monitoring systems.

Detailed and Complete Alternative Models

  1. MAX6856UK24D6+T
  2. MAX6857UK24D6+T
  3. MAX6858UK24D6+T
  4. MAX6859UK24D6+T
  5. MAX6860UK24D6+T

These alternative models offer similar functionality and specifications, providing flexibility in choosing the most suitable voltage regulator for specific applications.

Word count: 436 words

Texniki həllərdə MAX6855UK24D6+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX6855UK24D6+T in technical solutions:

  1. Q: What is MAX6855UK24D6+T? A: MAX6855UK24D6+T is a specific model of a voltage regulator IC (integrated circuit) manufactured by Maxim Integrated. It is designed for use in various technical solutions.

  2. Q: What is the input voltage range of MAX6855UK24D6+T? A: The input voltage range of MAX6855UK24D6+T is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of MAX6855UK24D6+T? A: The output voltage range of MAX6855UK24D6+T can be adjusted from 0.8V to 5.5V.

  4. Q: What is the maximum output current of MAX6855UK24D6+T? A: The maximum output current of MAX6855UK24D6+T is typically around 6A.

  5. Q: What is the efficiency of MAX6855UK24D6+T? A: The efficiency of MAX6855UK24D6+T can reach up to 95% under certain operating conditions.

  6. Q: Is MAX6855UK24D6+T suitable for battery-powered applications? A: Yes, MAX6855UK24D6+T is suitable for battery-powered applications as it has low quiescent current and supports low-power modes.

  7. Q: Does MAX6855UK24D6+T have built-in protection features? A: Yes, MAX6855UK24D6+T includes various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

  8. Q: Can MAX6855UK24D6+T be used in automotive applications? A: Yes, MAX6855UK24D6+T is designed to meet the requirements of automotive applications and can operate in a wide temperature range.

  9. Q: What package does MAX6855UK24D6+T come in? A: MAX6855UK24D6+T is available in a 24-pin TSSOP (Thin Shrink Small Outline Package) for easy integration into circuit designs.

  10. Q: Are there any evaluation boards or reference designs available for MAX6855UK24D6+T? A: Yes, Maxim Integrated provides evaluation boards and reference designs that can help users quickly prototype and implement MAX6855UK24D6+T in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.