Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX6856UK16D4+T
Ətraflı Baxın Məlumat vərəqləri

MAX6856UK16D4+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: UK16D4+T
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 1A
  • Quiescent Current: 25µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6856UK16D4+T IC has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator

Functional Features

  • High Efficiency: The MAX6856UK16D4+T offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 25µA, it ensures minimal power consumption during standby or idle modes.
  • Enable Pin: The EN pin allows for easy control of the device's operation, enabling or disabling the voltage regulator as needed.
  • Power Good Indicator: The PG pin provides a signal indicating when the output voltage is within the specified range, ensuring proper power delivery.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption during standby - Easy control with enable pin - Power good indicator for reliable operation

Disadvantages: - Limited maximum output current (1A)

Working Principles

The MAX6856UK16D4+T is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.3V. It achieves high efficiency by utilizing advanced power management techniques. The enable pin allows for easy control of the device's operation, while the power good indicator ensures reliable power delivery.

Detailed Application Field Plans

The MAX6856UK16D4+T is commonly used in various applications, including:

  1. Portable Electronic Devices: It provides efficient power management for battery-powered devices such as smartphones, tablets, and portable media players.
  2. IoT Devices: The low power consumption and compact package make it suitable for IoT devices that require long battery life and small form factors.
  3. Industrial Equipment: It can be utilized in industrial equipment that requires stable and efficient power supply, such as sensors, actuators, and control systems.

Detailed and Complete Alternative Models

  1. MAX6856UK16D3+T: Similar to MAX6856UK16D4+T but with a different package (UK16D3+T).
  2. MAX6856UK18D4+T: Similar to MAX6856UK16D4+T but with a higher output voltage range (0.8V to 3.6V).
  3. MAX6856UK16D5+T: Similar to MAX6856UK16D4+T but with a higher maximum output current (1.5A).

(Note: This list is not exhaustive and there may be other alternative models available.)

Word Count: 334

Texniki həllərdə MAX6856UK16D4+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX6856UK16D4+T in technical solutions:

  1. Q: What is MAX6856UK16D4+T? A: MAX6856UK16D4+T is a specific model of voltage supervisor IC (Integrated Circuit) manufactured by Maxim Integrated. It provides power supply monitoring and reset generation functions.

  2. Q: What are the typical applications of MAX6856UK16D4+T? A: MAX6856UK16D4+T is commonly used in various technical solutions where reliable power supply monitoring and reset generation are required, such as industrial control systems, automotive electronics, and communication equipment.

  3. Q: What is the operating voltage range of MAX6856UK16D4+T? A: The operating voltage range of MAX6856UK16D4+T is typically between 1.5V and 5.5V.

  4. Q: How many voltage inputs can MAX6856UK16D4+T monitor? A: MAX6856UK16D4+T can monitor up to four voltage inputs simultaneously.

  5. Q: Can MAX6856UK16D4+T generate a reset signal? A: Yes, MAX6856UK16D4+T can generate an active-low reset signal when any of the monitored voltages falls below its respective threshold.

  6. Q: What is the maximum reset timeout period of MAX6856UK16D4+T? A: The maximum reset timeout period of MAX6856UK16D4+T is typically 140ms.

  7. Q: Does MAX6856UK16D4+T have any built-in hysteresis for voltage monitoring? A: Yes, MAX6856UK16D4+T has built-in hysteresis to prevent false triggering of the reset signal due to voltage fluctuations.

  8. Q: Can I adjust the voltage thresholds for monitoring in MAX6856UK16D4+T? A: Yes, the voltage thresholds for monitoring can be adjusted using external resistors connected to the appropriate pins of MAX6856UK16D4+T.

  9. Q: Is MAX6856UK16D4+T available in different package options? A: Yes, MAX6856UK16D4+T is available in a 16-pin TSSOP (Thin Shrink Small Outline Package) package.

  10. Q: Where can I find more detailed information about MAX6856UK16D4+T? A: You can refer to the datasheet provided by Maxim Integrated for detailed information about MAX6856UK16D4+T, including electrical characteristics, pin configuration, and application circuit examples.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of MAX6856UK16D4+T.