Meixin Integrated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
MAX870EUK+T
Ətraflı Baxın Məlumat vərəqləri

MAX870EUK+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, small package size
  • Package: SOT-23-5
  • Essence: Linear regulator with adjustable output voltage
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 11V
  • Output Voltage Range: 1.25V to 10V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 120mV at 100mA
  • Line Regulation: ±0.05% typical
  • Load Regulation: ±0.1% typical
  • Quiescent Current: 50µA typical
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX870EUK+T has a total of five pins:

  1. GND: Ground pin
  2. FB: Feedback pin for adjusting the output voltage
  3. EN: Enable pin for turning the regulator on/off
  4. VIN: Input voltage pin
  5. VOUT: Output voltage pin

Functional Features

  • Adjustable Output Voltage: The MAX870EUK+T allows users to set the desired output voltage within the specified range.
  • Low Dropout Voltage: With a dropout voltage as low as 120mV, the regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • High Efficiency: The linear regulator achieves high efficiency by minimizing power dissipation.
  • Thermal Shutdown Protection: The device includes thermal shutdown circuitry to prevent damage due to excessive heat.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for versatile applications. - Small package size enables space-saving designs. - Low quiescent current minimizes power consumption. - Excellent line and load regulation ensures stable output voltage.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

The MAX870EUK+T is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the feedback voltage (FB) with a reference voltage to adjust the pass transistor's resistance. This adjustment maintains a constant output voltage regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The MAX870EUK+T finds applications in various fields, including but not limited to: 1. Battery-powered devices: Portable electronics, handheld instruments, etc. 2. Automotive electronics: Infotainment systems, dashboard displays, etc. 3. Industrial equipment: Sensors, control systems, etc. 4. Communication devices: Wireless routers, modems, etc.

Detailed and Complete Alternative Models

  1. LM317: Adjustable Linear Voltage Regulator
  2. LT1763: Low Dropout Linear Regulator
  3. TPS7A47: Ultra-Low Noise Linear Regulator
  4. ADP3339: High Current Linear Regulator
  5. XC6206: Low Quiescent Current Linear Regulator

These alternative models offer similar functionality and can be considered as substitutes for the MAX870EUK+T based on specific application requirements.

Word count: 408 words

Texniki həllərdə MAX870EUK+T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of MAX870EUK+T in technical solutions:

1. What is the MAX870EUK+T? The MAX870EUK+T is a high-efficiency, low-noise, step-up DC-DC converter that provides a regulated output voltage from a single lithium-ion (Li+) cell or three-cell NiMH/NiCd batteries.

2. What is the input voltage range of MAX870EUK+T? The input voltage range of MAX870EUK+T is typically between 2.7V and 5.5V.

3. What is the output voltage range of MAX870EUK+T? The output voltage range of MAX870EUK+T can be adjusted from 2.5V to 5.5V using external resistors.

4. What is the maximum output current of MAX870EUK+T? The maximum output current of MAX870EUK+T is 100mA.

5. Can MAX870EUK+T operate in shutdown mode? Yes, MAX870EUK+T can operate in shutdown mode, where it consumes very low quiescent current.

6. Does MAX870EUK+T have built-in thermal shutdown protection? Yes, MAX870EUK+T has built-in thermal shutdown protection to prevent damage due to excessive temperature.

7. Is MAX870EUK+T suitable for battery-powered applications? Yes, MAX870EUK+T is designed for battery-powered applications and offers high efficiency and low power consumption.

8. Can MAX870EUK+T be used in portable audio devices? Yes, MAX870EUK+T can be used in portable audio devices, such as MP3 players, where it can efficiently boost the battery voltage to power the audio circuitry.

9. What is the typical efficiency of MAX870EUK+T? The typical efficiency of MAX870EUK+T is around 90%, making it suitable for power-sensitive applications.

10. Does MAX870EUK+T require any external components for operation? Yes, MAX870EUK+T requires a few external components, such as input and output capacitors, inductor, and resistors to set the output voltage. The datasheet provides detailed application circuit examples.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for accurate information.