Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
AT24CS08-XHM-T
Ətraflı Baxın Məlumat vərəqləri

AT24CS08-XHM-T

Product Overview

Category

The AT24CS08-XHM-T belongs to the category of serial EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuits.

Use

It is used for non-volatile storage of data in various electronic devices, including consumer electronics, industrial equipment, and automotive systems.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • Small form factor
  • High reliability

Package

The AT24CS08-XHM-T is available in a compact 8-lead SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the AT24CS08-XHM-T lies in its ability to provide reliable and non-volatile data storage in a wide range of electronic applications.

Packaging/Quantity

The AT24CS08-XHM-T is typically supplied in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 8 Kbits (1 Kbyte)
  • Interface: I2C (Two-wire Serial Interface)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The AT24CS08-XHM-T features the following pin configuration: 1. A0: Chip Address Input 2. A1: Chip Address Input 3. A2: Chip Address Input 4. GND: Ground 5. SDA: Serial Data 6. SCL: Serial Clock 7. WP: Write Protect 8. VCC: Power Supply

Functional Features

  • Byte and Page Write Modes
  • Random and Sequential Read Modes
  • Write Protection
  • Software Write Protection
  • Hardware Write Protection
  • Self-timed Write Cycle

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Compact form factor
  • High reliability and endurance
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to larger EEPROMs
  • Slower write speeds compared to some other memory technologies

Working Principles

The AT24CS08-XHM-T operates by utilizing electrically programmable memory cells that can be written to and read from using the I2C interface. The memory cells retain their stored data even when the power is removed, providing non-volatile data storage.

Detailed Application Field Plans

The AT24CS08-XHM-T is well-suited for use in various applications, including: - Smartphones and mobile devices for storing user settings and preferences - Industrial control systems for parameter storage - Automotive electronics for storing calibration data and vehicle settings - IoT (Internet of Things) devices for data logging and configuration storage

Detailed and Complete Alternative Models

Some alternative models to the AT24CS08-XHM-T include: - AT24C02: 2 Kbit (256 bytes) capacity - AT24C16: 16 Kbit (2 Kbytes) capacity - AT24C64: 64 Kbit (8 Kbytes) capacity

In conclusion, the AT24CS08-XHM-T is a versatile and reliable serial EEPROM IC that provides non-volatile data storage for a wide range of electronic applications.

[Word Count: 477]

Texniki həllərdə AT24CS08-XHM-T tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the AT24CS08-XHM-T?

    • The AT24CS08-XHM-T is a 8-Kbit (1024 x 8) Serial Electrically Erasable and Programmable Read-Only Memory (EEPROM) device.

  2. What are the key features of the AT24CS08-XHM-T?

    • Some key features include a 2-wire serial interface, a wide voltage operation range, and a 1 MHz clock frequency.

  3. How can the AT24CS08-XHM-T be used in technical solutions?

    • It can be used for storing configuration data, calibration constants, and other application-specific parameters in various technical solutions.

  4. What are the typical applications of the AT24CS08-XHM-T?

    • Typical applications include industrial automation, consumer electronics, medical devices, and automotive systems.

  5. What are the operating conditions for the AT24CS08-XHM-T?

    • The operating voltage ranges from 1.7V to 5.5V, and it operates over a temperature range of -40°C to +85°C.

  6. How does the AT24CS08-XHM-T handle data retention?

    • It has a minimum data retention of 100 years, making it suitable for long-term storage of critical information.

  7. What are the programming and erasing characteristics of the AT24CS08-XHM-T?

    • It supports byte write and page write operations, as well as byte and sequential read operations.

  8. Can the AT24CS08-XHM-T be cascaded with other devices?

    • Yes, it can be cascaded with additional devices to expand the memory capacity in an application.

  9. What are the package options available for the AT24CS08-XHM-T?

    • The AT24CS08-XHM-T is available in various package options, including SOP, TSSOP, and UDFN.

  10. Is the AT24CS08-XHM-T compliant with industry standards?

    • Yes, it is compliant with the I2C protocol and is RoHS-compliant, making it suitable for use in environmentally sensitive applications.