Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATMEGA48PV-10PU
Ətraflı Baxın Məlumat vərəqləri

ATMEGA48PV-10PU

Product Overview

Category

ATMEGA48PV-10PU belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require a programmable device to control and monitor different functions.

Characteristics

  • Low power consumption
  • High-performance 8-bit AVR microcontroller
  • Offers a wide range of features and peripherals
  • Suitable for both industrial and consumer applications

Package

ATMEGA48PV-10PU is available in a 28-pin DIP (Dual Inline Package) format.

Essence

The essence of this microcontroller lies in its ability to provide a versatile and efficient solution for embedded systems, offering a balance between performance and power consumption.

Packaging/Quantity

ATMEGA48PV-10PU is typically packaged in tubes or trays, with quantities varying based on the manufacturer's specifications.

Specifications

  • Microcontroller Architecture: AVR
  • CPU Speed: 20 MHz
  • Flash Memory: 4 KB
  • SRAM: 512 bytes
  • EEPROM: 256 bytes
  • Operating Voltage: 1.8V - 5.5V
  • Digital I/O Pins: 23
  • Analog Input Pins: 6
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3
  • PWM Channels: 6
  • ADC Resolution: 10-bit
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ATMEGA48PV-10PU microcontroller has a total of 28 pins. The pin configuration is as follows:

  1. PCINT0 / CLKI / ICP1
  2. PD0 / SCL / T0
  3. PD1 / SDA / T1
  4. PD2 / RXD / AIN0
  5. PD3 / TXD / AIN1
  6. PD4 / INT0 / T0
  7. VCC
  8. GND
  9. XTAL1 / OSC1
  10. XTAL2 / OSC2
  11. PB6 / OC1B / PCINT6
  12. PB7 / OC0A / OC1C / PCINT7
  13. PD5 / OC0B / T1
  14. PD6 / AIN0 / T2
  15. PD7 / AIN1 / OC2A
  16. PB0 / SS / PCINT0
  17. PB1 / SCK / PCINT1
  18. PB2 / MOSI / PCINT2
  19. PB3 / MISO / OC2B / PCINT3
  20. PB4 / OC1A / PCINT4
  21. PB5 / OC1B / PCINT5
  22. AVCC
  23. AREF
  24. GND
  25. ADC6 / PCINT14
  26. ADC7 / PCINT15
  27. RESET
  28. VCC

Functional Features

  • High-performance RISC architecture
  • Advanced instruction set for efficient execution
  • Multiple communication interfaces for data transfer
  • Built-in analog-to-digital converter (ADC)
  • PWM channels for precise control of output signals
  • Timers/counters for accurate timing operations
  • Low power consumption modes for energy efficiency
  • Robust interrupt handling mechanism

Advantages and Disadvantages

Advantages

  • Versatile and flexible microcontroller suitable for various applications
  • Wide operating voltage range allows compatibility with different power sources
  • Rich set of features and peripherals provide extensive functionality
  • Efficient power management options for optimal energy consumption
  • Well-documented and widely supported by development tools and resources

Disadvantages

  • Limited program and data memory compared to higher-end microcontrollers
  • Relatively lower clock speed compared to some other microcontrollers in the same category
  • May require additional external components for certain applications

Working Principles

ATMEGA48PV-10PU operates based on the AVR architecture, utilizing a RISC (Reduced Instruction Set Computing) design. It executes instructions stored in its flash memory, interacting with various peripherals and sensors to perform specific tasks. The microcontroller can be programmed using different development environments and programming languages, allowing users to define the desired behavior of the device.

Detailed Application Field Plans

ATMEGA48PV-10PU finds applications in a wide range of fields, including but not limited to: - Home automation systems - Industrial control systems - Robotics - Automotive electronics - Consumer electronics - Internet of Things (IoT) devices - Medical equipment - Sensor networks

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ATMEGA48PV-10PU are: - ATMEGA88PV-10PU - ATMEGA168

Texniki həllərdə ATMEGA48PV-10PU tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the ATMEGA48PV-10PU?
    Answer: The ATMEGA48PV-10PU is a microcontroller from the AVR family, specifically designed for embedded applications.

  2. Question: What is the operating voltage range of the ATMEGA48PV-10PU?
    Answer: The operating voltage range of the ATMEGA48PV-10PU is 1.8V to 5.5V.

  3. Question: How many I/O pins does the ATMEGA48PV-10PU have?
    Answer: The ATMEGA48PV-10PU has a total of 23 I/O pins.

  4. Question: What is the clock frequency of the ATMEGA48PV-10PU?
    Answer: The ATMEGA48PV-10PU can operate at a maximum clock frequency of 20 MHz.

  5. Question: Can the ATMEGA48PV-10PU be programmed using the Arduino IDE?
    Answer: Yes, the ATMEGA48PV-10PU can be programmed using the Arduino IDE with the appropriate board configuration.

  6. Question: Does the ATMEGA48PV-10PU have built-in analog-to-digital converters (ADC)?
    Answer: Yes, the ATMEGA48PV-10PU has an 8-channel, 10-bit ADC for analog input measurements.

  7. Question: What is the flash memory size of the ATMEGA48PV-10PU?
    Answer: The ATMEGA48PV-10PU has 4KB of flash memory for storing program code.

  8. Question: Can the ATMEGA48PV-10PU communicate with other devices using serial communication protocols?
    Answer: Yes, the ATMEGA48PV-10PU supports UART, SPI, and I2C communication protocols.

  9. Question: Is the ATMEGA48PV-10PU suitable for low-power applications?
    Answer: Yes, the ATMEGA48PV-10PU has various power-saving modes and features to optimize power consumption.

  10. Question: Can the ATMEGA48PV-10PU be used in industrial automation applications?
    Answer: Yes, the ATMEGA48PV-10PU is commonly used in industrial automation due to its reliability, versatility, and wide operating voltage range.