Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATTINY214-SSFR
Ətraflı Baxın Məlumat vərəqləri

ATTINY214-SSFR

Product Overview

Category

The ATTINY214-SSFR belongs to the category of microcontrollers.

Use

This microcontroller is designed for various embedded applications that require low power consumption and high performance.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Integrated peripherals
  • Wide operating voltage range

Package

The ATTINY214-SSFR comes in a SSFR package, which stands for Shrink Small Outline Package with Reduced Footprint. This package allows for compact designs and efficient use of board space.

Essence

The essence of the ATTINY214-SSFR lies in its ability to provide a powerful yet energy-efficient solution for embedded systems.

Packaging/Quantity

The ATTINY214-SSFR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Microcontroller architecture: AVR
  • CPU frequency: Up to 20 MHz
  • Flash memory: 16 KB
  • SRAM: 2 KB
  • EEPROM: 256 bytes
  • Operating voltage: 1.8V - 5.5V
  • Digital I/O pins: 14
  • Analog input channels: 10
  • Communication interfaces: UART, SPI, I2C
  • Timers/counters: 4
  • PWM channels: 6
  • Operating temperature range: -40°C to +105°C

Detailed Pin Configuration

The ATTINY214-SSFR has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. RESET - Reset pin
  4. PA0 - General-purpose I/O pin
  5. PA1 - General-purpose I/O pin
  6. PA2 - General-purpose I/O pin
  7. PA3 - General-purpose I/O pin
  8. PA4 - General-purpose I/O pin
  9. PA5 - General-purpose I/O pin
  10. PA6 - General-purpose I/O pin
  11. PA7 - General-purpose I/O pin
  12. PB0 - General-purpose I/O pin
  13. PB1 - General-purpose I/O pin
  14. PB2 - General-purpose I/O pin
  15. PB3 - General-purpose I/O pin
  16. PB4 - General-purpose I/O pin
  17. PB5 - General-purpose I/O pin
  18. AVCC - Analog supply voltage
  19. AREF - Analog reference voltage
  20. GND - Ground

Functional Features

The ATTINY214-SSFR offers a range of functional features that enhance its usability in various applications:

  • High-performance CPU for efficient processing
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • Timers/counters and PWM channels for precise timing and control
  • Analog input channels for sensor interfacing
  • Low power consumption modes for energy efficiency
  • Robust operating temperature range for reliable operation in harsh environments

Advantages and Disadvantages

Advantages

  • Low power consumption enables battery-powered applications
  • Compact form factor allows for space-efficient designs
  • Wide operating voltage range provides flexibility in power supply options
  • Integrated peripherals simplify system integration
  • High-performance CPU ensures efficient execution of tasks

Disadvantages

  • Limited flash memory and SRAM may restrict the complexity of applications
  • Lack of external memory interface limits storage capacity
  • Limited number of I/O pins may constrain the connectivity options

Working Principles

The ATTINY214-SSFR operates based on the AVR microcontroller architecture. It executes instructions stored in its flash memory to perform various tasks. The CPU, along with integrated peripherals, interacts with external components and sensors to process data and control the system's behavior. The microcontroller can be programmed using development tools and software to define its functionality.

Detailed Application Field Plans

The ATTINY214-SSFR finds applications in a wide range of fields, including but not limited to:

  1. Internet of Things (IoT) devices
  2. Home automation systems
  3. Wearable technology
  4. Industrial automation
  5. Consumer electronics
  6. Automotive electronics
  7. Medical devices

In these fields, the microcontroller can be used for tasks such as sensor data acquisition, signal processing, communication, control algorithms, and user interface implementation.

Detailed and Complete Alternative Models

If the ATTINY214-SSFR does not meet specific requirements, alternative microcontrollers with similar features and capabilities can be considered. Some alternative models include:

  1. ATTINY1616-SSFR
  2. ATTINY3216-SSFR
  3. ATTINY402-SSFR
  4. ATTINY817-SSFR
  5. ATTINY1617-SSFR

These alternative models offer varying flash memory sizes

Texniki həllərdə ATTINY214-SSFR tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of ATTINY214-SSFR in technical solutions:

  1. Q: What is the ATTINY214-SSFR microcontroller used for? A: The ATTINY214-SSFR is a microcontroller that can be used for various applications, such as IoT devices, home automation, robotics, and sensor-based systems.

  2. Q: What is the maximum clock frequency supported by the ATTINY214-SSFR? A: The ATTINY214-SSFR supports a maximum clock frequency of 20 MHz.

  3. Q: How much flash memory does the ATTINY214-SSFR have? A: The ATTINY214-SSFR has 16 KB of flash memory for storing program code.

  4. Q: Can I use the ATTINY214-SSFR for low-power applications? A: Yes, the ATTINY214-SSFR is designed for low-power applications and features multiple sleep modes to conserve energy.

  5. Q: Does the ATTINY214-SSFR have built-in analog-to-digital converters (ADCs)? A: Yes, the ATTINY214-SSFR has a 10-bit ADC with up to 12 channels for analog input measurements.

  6. Q: Can I communicate with other devices using serial communication protocols? A: Yes, the ATTINY214-SSFR supports UART, SPI, and I2C communication protocols for interfacing with other devices.

  7. Q: What is the operating voltage range of the ATTINY214-SSFR? A: The ATTINY214-SSFR operates within a voltage range of 1.8V to 5.5V.

  8. Q: Is it possible to program the ATTINY214-SSFR using an Arduino IDE? A: Yes, the ATTINY214-SSFR can be programmed using the Arduino IDE with the help of an appropriate hardware programmer.

  9. Q: Can I use the ATTINY214-SSFR in industrial environments? A: Yes, the ATTINY214-SSFR is designed to withstand harsh industrial environments and has a temperature range of -40°C to 105°C.

  10. Q: Are there any development boards available for the ATTINY214-SSFR? A: Yes, there are development boards specifically designed for the ATTINY214-SSFR, which provide easy prototyping and testing capabilities.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the technical solution.