Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATTINY2313V-10PJ
Ətraflı Baxın Məlumat vərəqləri

ATTINY2313V-10PJ

Product Overview

The ATTINY2313V-10PJ belongs to the category of microcontrollers and is commonly used in various electronic applications. This microcontroller is known for its compact size, low power consumption, and versatile functionality. The ATTINY2313V-10PJ comes in a small package and is designed to perform various tasks in embedded systems.

Basic Information

  • Category: Microcontroller
  • Use: Embedded systems, electronic applications
  • Characteristics: Compact size, low power consumption, versatile functionality
  • Package: 20-pin PDIP package
  • Essence: Control and process data in embedded systems
  • Packaging/Quantity: Available in reels with a quantity of 2500 units

Specifications

  • Operating Voltage: 1.8 - 5.5V
  • Flash Memory: 2KB
  • SRAM: 128 bytes
  • EEPROM: 128 bytes
  • I/O Pins: 18
  • Timers: 2
  • Communication Interfaces: SPI, UART/USART
  • Clock Speed: 10MHz

Detailed Pin Configuration

The ATTINY2313V-10PJ features a total of 20 pins, each serving specific functions such as I/O, power supply, communication, and programming. The detailed pin configuration includes the assignment of each pin for input/output, power, ground, and communication interfaces.

Functional Features

The functional features of the ATTINY2313V-10PJ include: - Versatile I/O capabilities - Built-in timers for precise timing control - Communication interfaces for data exchange - Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages

  • Compact size ideal for space-constrained designs
  • Low power consumption for extended battery life
  • Versatile functionality suitable for diverse applications
  • Cost-effective solution for embedded systems

Disadvantages

  • Limited memory capacity for complex applications
  • Lower clock speed compared to higher-end microcontrollers

Working Principles

The ATTINY2313V-10PJ operates based on the principles of digital logic and microcontroller architecture. It processes instructions and data to control various electronic components and perform specific tasks within embedded systems.

Detailed Application Field Plans

The ATTINY2313V-10PJ is well-suited for the following application fields: - Home automation systems - Industrial control systems - Sensor interfacing and data processing - Consumer electronics products - Automotive electronics

Detailed and Complete Alternative Models

  • ATmega328P: Offers higher memory capacity and additional features
  • PIC16F877A: Provides similar functionality with a different architecture
  • STM32F103C8T6: Features higher clock speed and advanced peripherals

In conclusion, the ATTINY2313V-10PJ microcontroller offers a balance of size, functionality, and power efficiency, making it an ideal choice for various embedded system applications.

[Word Count: 410]

Texniki həllərdə ATTINY2313V-10PJ tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the ATTINY2313V-10PJ microcontroller used for?

    • The ATTINY2313V-10PJ is commonly used in embedded systems and technical solutions where low power consumption and small form factor are important.

  2. What are the key features of the ATTINY2313V-10PJ?

    • The ATTINY2313V-10PJ features 2KB of flash memory, 128 bytes of SRAM, 18 general-purpose I/O lines, and operates at a maximum frequency of 10MHz.

  3. How can I program the ATTINY2313V-10PJ?

    • The microcontroller can be programmed using various development tools such as Atmel Studio, AVR-GCC, or Arduino IDE with appropriate hardware like an ISP programmer or Arduino board.

  4. What are some typical applications for the ATTINY2313V-10PJ?

    • Common applications include smart home devices, sensor nodes, IoT devices, industrial control systems, and consumer electronics.

  5. What voltage does the ATTINY2313V-10PJ operate at?

    • The microcontroller operates at a voltage range of 1.8V to 5.5V, making it suitable for battery-powered applications.

  6. Does the ATTINY2313V-10PJ have built-in communication interfaces?

    • Yes, it supports serial communication through USART (Universal Synchronous and Asynchronous serial Receiver and Transmitter).

  7. Can the ATTINY2313V-10PJ be used for analog signal processing?

    • Yes, it has an 10-bit ADC (Analog-to-Digital Converter) with eight multiplexed single-ended input channels.

  8. What kind of peripherals does the ATTINY2313V-10PJ support?

    • It supports timers/counters, PWM (Pulse Width Modulation) outputs, and interrupts for efficient handling of external events.

  9. Is the ATTINY2313V-10PJ suitable for low-power applications?

    • Yes, it has power-saving sleep modes and low-power consumption, making it ideal for battery-operated devices.

  10. Where can I find detailed technical documentation for the ATTINY2313V-10PJ?

    • Detailed technical documentation, including datasheets and application notes, can be found on the manufacturer's website or distributor's resources.