Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATTINY25V-10MF
Ətraflı Baxın Məlumat vərəqləri

ATTINY25V-10MF

Product Overview

Category

The ATTINY25V-10MF belongs to the category of microcontrollers.

Use

It is commonly used in various electronic devices and systems that require embedded control.

Characteristics

  • Low-power consumption
  • High-performance 8-bit AVR microcontroller
  • Compact size
  • Wide operating voltage range

Package

The ATTINY25V-10MF is available in a compact surface-mount package.

Essence

This microcontroller is designed to provide efficient and reliable control capabilities for small-scale electronic applications.

Packaging/Quantity

The ATTINY25V-10MF is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Microcontroller Architecture: AVR
  • CPU Speed: 10 MHz
  • Flash Memory: 2 KB
  • RAM: 128 Bytes
  • EEPROM: 128 Bytes
  • Operating Voltage Range: 1.8V - 5.5V
  • Digital I/O Pins: 6
  • Analog Input Pins: 4
  • PWM Channels: 3
  • Communication Interfaces: SPI, I2C, UART
  • Timers/Counters: 2
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ATTINY25V-10MF has a total of 8 pins, each serving a specific purpose:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. Reset (RESET): Reset pin for initializing the microcontroller
  4. Digital I/O Pin (PB0): General-purpose digital input/output pin
  5. Digital I/O Pin (PB1): General-purpose digital input/output pin
  6. Digital I/O Pin (PB2): General-purpose digital input/output pin
  7. Analog Input Pin (ADC2): Analog input pin for ADC conversion
  8. Analog Input Pin (ADC3): Analog input pin for ADC conversion

Functional Features

  • Low-power consumption enables battery-operated applications
  • High-performance AVR architecture ensures efficient execution of instructions
  • Flexible communication interfaces facilitate data exchange with other devices
  • Built-in timers/counters enable precise timing and event management
  • PWM channels allow for analog signal generation and control

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained designs
  • Wide operating voltage range enhances compatibility with different power sources
  • Low-power consumption extends battery life in portable applications
  • Versatile communication interfaces enable integration with various peripherals

Disadvantages

  • Limited flash memory and RAM may restrict the complexity of applications
  • Limited number of I/O pins may limit the connectivity options for larger systems

Working Principles

The ATTINY25V-10MF operates based on the AVR architecture, which utilizes a Harvard architecture with separate program and data memories. It executes instructions stored in the flash memory and interacts with external devices through its I/O pins and communication interfaces. The microcontroller can be programmed using various development tools and programming languages.

Detailed Application Field Plans

The ATTINY25V-10MF finds applications in a wide range of electronic systems, including but not limited to: - Home automation systems - Industrial control systems - Consumer electronics - Internet of Things (IoT) devices - Sensor networks - Wearable technology

Detailed and Complete Alternative Models

  • ATTINY45V-10MF: Similar to ATTINY25V-10MF but with additional I/O pins and more flash memory.
  • ATTINY85V-10MF: Similar to ATTINY25V-10MF but with more I/O pins and higher flash memory capacity.
  • ATTINY13V-10MF: A lower-cost alternative with reduced flash memory and I/O pins.

These alternative models offer varying capabilities and can be chosen based on specific project requirements.

Word count: 536 words

Texniki həllərdə ATTINY25V-10MF tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of ATTINY25V-10MF in technical solutions:

  1. Q: What is the ATTINY25V-10MF microcontroller used for? A: The ATTINY25V-10MF is a low-power, high-performance microcontroller commonly used in various embedded systems and IoT applications.

  2. Q: What is the operating voltage range of ATTINY25V-10MF? A: The operating voltage range of ATTINY25V-10MF is typically between 1.8V and 5.5V.

  3. Q: How much flash memory does ATTINY25V-10MF have? A: ATTINY25V-10MF has 2KB of flash memory, which can be used to store program code.

  4. Q: Can I use ATTINY25V-10MF for analog signal processing? A: Yes, ATTINY25V-10MF has an integrated 10-bit ADC (Analog-to-Digital Converter) that allows you to process analog signals.

  5. Q: What communication interfaces are supported by ATTINY25V-10MF? A: ATTINY25V-10MF supports SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit) communication protocols.

  6. Q: Is ATTINY25V-10MF suitable for battery-powered applications? A: Yes, ATTINY25V-10MF is designed to operate at low power and has sleep modes, making it ideal for battery-powered applications.

  7. Q: Can I use ATTINY25V-10MF for controlling motors or other high-power devices? A: While ATTINY25V-10MF has limited current sourcing capabilities, it may not be suitable for directly driving high-power devices. External driver circuits may be required.

  8. Q: What programming language can I use to program ATTINY25V-10MF? A: ATTINY25V-10MF can be programmed using C or assembly language, and there are various development environments available for this purpose.

  9. Q: Can I use ATTINY25V-10MF in industrial applications? A: Yes, ATTINY25V-10MF is suitable for a wide range of industrial applications due to its small size, low power consumption, and robustness.

  10. Q: Are there any limitations or considerations when using ATTINY25V-10MF? A: Some considerations include limited I/O pins (6 in total), limited flash memory capacity, and the need for external components for certain functionalities like voltage regulation or communication interfaces.