Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATTINY25V-10MUR
Ətraflı Baxın Məlumat vərəqləri

ATTINY25V-10MUR

Product Overview

Category

The ATTINY25V-10MUR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Versatile functionality

Package

The ATTINY25V-10MUR is available in a compact surface-mount package.

Essence

This microcontroller is designed to provide efficient and reliable control for electronic applications.

Packaging/Quantity

The ATTINY25V-10MUR is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Operating Voltage: 1.8V - 5.5V
  • Clock Speed: 10 MHz
  • Flash Memory: 2 KB
  • RAM: 128 Bytes
  • EEPROM: 128 Bytes
  • GPIO Pins: 6
  • ADC Channels: 4
  • Communication Interfaces: SPI, I2C, UART

Detailed Pin Configuration

The ATTINY25V-10MUR has a total of 8 pins, each serving a specific purpose:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. PB3: General-purpose I/O pin
  4. PB4: General-purpose I/O pin
  5. PB0: General-purpose I/O pin
  6. PB1: General-purpose I/O pin
  7. RESET: Reset pin
  8. PB2: General-purpose I/O pin

Functional Features

  • Low power consumption enables battery-powered applications
  • High-performance CPU allows for efficient processing
  • Integrated peripherals enhance functionality
  • Flexible communication interfaces enable connectivity with other devices
  • On-chip memory provides storage for program code and data

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-efficient designs
  • Low power consumption extends battery life
  • Versatile functionality suits a wide range of applications
  • Integrated peripherals reduce the need for external components

Disadvantages

  • Limited memory capacity may restrict complex applications
  • Lack of advanced features compared to higher-end microcontrollers

Working Principles

The ATTINY25V-10MUR operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its memory, interacts with external devices through its I/O pins, and communicates with other devices using its communication interfaces.

Detailed Application Field Plans

The ATTINY25V-10MUR finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Consumer electronics - Internet of Things (IoT) devices - Sensor networks - Automotive electronics

Detailed and Complete Alternative Models

  1. ATTINY45V-10MUR: Similar to ATTINY25V-10MUR but with increased memory capacity.
  2. ATTINY85V-10MUR: Similar to ATTINY25V-10MUR but with additional I/O pins and memory.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, the ATTINY25V-10MUR is a versatile microcontroller that combines low power consumption, high performance, and a small form factor. Its integrated peripherals and communication interfaces make it suitable for a wide range of applications. While it has some limitations in terms of memory capacity and advanced features, alternative models are available to address specific needs.

Texniki həllərdə ATTINY25V-10MUR tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of ATTINY25V-10MUR in technical solutions:

  1. Q: What is the ATTINY25V-10MUR microcontroller used for? A: The ATTINY25V-10MUR is a low-power, high-performance microcontroller commonly used in various embedded systems and IoT applications.

  2. Q: What is the operating voltage range of the ATTINY25V-10MUR? A: The ATTINY25V-10MUR operates within a voltage range of 1.8V to 5.5V.

  3. Q: How much flash memory does the ATTINY25V-10MUR have? A: The ATTINY25V-10MUR has 2KB of flash memory for program storage.

  4. Q: Can I use the ATTINY25V-10MUR for analog input/output operations? A: Yes, the ATTINY25V-10MUR has 6 analog input pins that can be used for analog-to-digital conversion and 3 digital output pins with PWM capability.

  5. Q: What communication interfaces are supported by the ATTINY25V-10MUR? A: The ATTINY25V-10MUR supports SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit) communication protocols.

  6. Q: Is it possible to program the ATTINY25V-10MUR using Arduino IDE? A: Yes, the ATTINY25V-10MUR can be programmed using the Arduino IDE with the help of an external programmer or by utilizing the Arduino as ISP (In-System Programmer).

  7. Q: What is the maximum clock frequency of the ATTINY25V-10MUR? A: The ATTINY25V-10MUR can operate at a maximum clock frequency of 10MHz.

  8. Q: Can I use the ATTINY25V-10MUR in battery-powered applications? A: Yes, the ATTINY25V-10MUR is designed for low-power applications and can be used in battery-powered devices.

  9. Q: Does the ATTINY25V-10MUR have any built-in peripherals? A: Yes, the ATTINY25V-10MUR has built-in timers/counters, watchdog timer, and sleep modes to optimize power consumption.

  10. Q: Are there any development boards available for the ATTINY25V-10MUR? A: Yes, there are various development boards and breakout boards available specifically designed for the ATTINY25V-10MUR, making it easier to prototype and develop applications.

Please note that these answers are general and may vary depending on specific implementation details and requirements.