Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATTINY26-16PI
Ətraflı Baxın Məlumat vərəqləri

ATTINY26-16PI

Product Overview

Category

The ATTINY26-16PI belongs to the category of microcontrollers.

Use

It is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Integrated peripherals
  • Programmable memory

Package

The ATTINY26-16PI comes in a 20-pin plastic dual inline package (DIP).

Essence

This microcontroller is designed to provide efficient and reliable control capabilities for embedded systems.

Packaging/Quantity

The ATTINY26-16PI is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Operating Voltage: 2.7V - 5.5V
  • Clock Speed: Up to 16 MHz
  • Flash Memory: 2KB
  • RAM: 128 Bytes
  • EEPROM: 128 Bytes
  • I/O Pins: 18
  • Timers/Counters: 2
  • Communication Interfaces: SPI, UART, I2C
  • ADC Channels: 8-bit, 4 channels

Detailed Pin Configuration

The ATTINY26-16PI has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. RESET
  2. PB0
  3. PB1
  4. PB2
  5. PB3
  6. PB4
  7. PB5
  8. GND
  9. VCC
  10. XTAL1
  11. XTAL2
  12. PD0
  13. PD1
  14. PD2
  15. PD3
  16. PD4
  17. PD5
  18. PD6
  19. PD7
  20. AVCC

Functional Features

  • Low-power sleep mode for energy efficiency
  • Power-on reset and programmable brown-out detection
  • Internal and external interrupts for event-driven programming
  • Watchdog timer for system reliability
  • PWM output for precise control of analog devices

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices.
  • High-performance capabilities enable efficient data processing.
  • Small form factor allows for integration into compact designs.
  • Integrated peripherals reduce the need for additional components.

Disadvantages

  • Limited memory capacity may restrict the complexity of applications.
  • Lack of built-in communication interfaces may require additional components for certain applications.

Working Principles

The ATTINY26-16PI operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its memory to perform various tasks, such as data processing, input/output control, and communication with external devices.

Detailed Application Field Plans

The ATTINY26-16PI finds applications in a wide range of fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the ATTINY26-16PI include: - ATTINY25-20PU - ATTINY45-20SU - ATTINY85-20PU

These models provide comparable features and can be used as alternatives depending on specific project requirements.

In conclusion, the ATTINY26-16PI is a versatile microcontroller with low power consumption, high performance, and integrated peripherals. Its compact size and functional features make it suitable for various applications across different industries.

Texniki həllərdə ATTINY26-16PI tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of ATTINY26-16PI in technical solutions:

  1. Q: What is ATTINY26-16PI? A: ATTINY26-16PI is a microcontroller from the AVR family, manufactured by Atmel. It has 16KB of flash memory, 512 bytes of EEPROM, and 1KB of SRAM.

  2. Q: What are the key features of ATTINY26-16PI? A: Some key features of ATTINY26-16PI include 20 general-purpose I/O pins, 8-channel 10-bit ADC, 3 timers/counters, SPI and I2C interfaces, and UART for serial communication.

  3. Q: What voltage does ATTINY26-16PI operate at? A: ATTINY26-16PI operates at a voltage range of 2.7V to 5.5V.

  4. Q: Can ATTINY26-16PI be used in battery-powered applications? A: Yes, ATTINY26-16PI can be used in battery-powered applications due to its low power consumption and ability to operate at lower voltages.

  5. Q: How can I program ATTINY26-16PI? A: ATTINY26-16PI can be programmed using various programming tools such as Atmel Studio, AVRDUDE, or Arduino IDE with an appropriate programmer like AVRISP mkII or USBasp.

  6. Q: What programming languages can be used with ATTINY26-16PI? A: ATTINY26-16PI can be programmed using C/C++ language with the help of AVR-GCC compiler or assembly language if desired.

  7. Q: Can ATTINY26-16PI be used for real-time applications? A: Yes, ATTINY26-16PI can be used for real-time applications as it has built-in timers/counters that can be utilized for precise timing and control.

  8. Q: Can ATTINY26-16PI communicate with other devices? A: Yes, ATTINY26-16PI supports various communication protocols such as SPI, I2C, and UART, allowing it to communicate with other devices like sensors, displays, or microcontrollers.

  9. Q: What is the maximum clock frequency of ATTINY26-16PI? A: The maximum clock frequency of ATTINY26-16PI is 16MHz.

  10. Q: Are there any development boards available for ATTINY26-16PI? A: While there might not be specific development boards for ATTINY26-16PI, it can be easily integrated into custom PCB designs or used on breadboards with appropriate supporting components.

Please note that these answers are general and may vary depending on specific requirements and application scenarios.