Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATTINY45V-10SH
Ətraflı Baxın Məlumat vərəqləri

ATTINY45V-10SH

Product Overview

Category

The ATTINY45V-10SH belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and applications that require a compact and low-power solution.

Characteristics

  • Low power consumption
  • Small form factor
  • High performance
  • Versatile functionality

Package

The ATTINY45V-10SH is available in a small outline package (SOP) with 8 pins.

Essence

The essence of the ATTINY45V-10SH lies in its ability to provide efficient processing capabilities while consuming minimal power.

Packaging/Quantity

The ATTINY45V-10SH is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Microcontroller type: 8-bit AVR
  • Operating voltage: 1.8V - 5.5V
  • Clock speed: 10 MHz
  • Flash memory: 4 KB
  • RAM: 256 bytes
  • EEPROM: 256 bytes
  • I/O pins: 6
  • ADC channels: 4
  • Timers/counters: 2

Detailed Pin Configuration

The ATTINY45V-10SH has a total of 8 pins, each serving a specific purpose:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. PB5: Digital I/O pin
  4. PB3: Digital I/O pin
  5. PB4: Digital I/O pin
  6. PB0: Digital I/O pin
  7. PB1: Digital I/O pin
  8. PB2: Digital I/O pin

Functional Features

  • Low power consumption enables battery-powered applications.
  • High-performance 8-bit AVR architecture allows for efficient execution of instructions.
  • Flexible I/O pins provide versatility in connecting external devices.
  • Integrated analog-to-digital converter (ADC) enables measurement of analog signals.
  • Timers/counters facilitate precise timing and event control.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • Low power consumption extends battery life.
  • Versatile functionality allows for a wide range of applications.
  • Cost-effective solution for simple to moderately complex projects.

Disadvantages

  • Limited memory capacity may restrict the complexity of applications.
  • Lack of built-in communication interfaces may require additional components for certain applications.

Working Principles

The ATTINY45V-10SH operates based on the AVR architecture, utilizing an 8-bit RISC microcontroller core. It executes instructions stored in its flash memory, interacting with external devices through its I/O pins. The low-power design ensures efficient operation even in battery-powered scenarios.

Detailed Application Field Plans

The ATTINY45V-10SH finds applications in various fields, including but not limited to: - Consumer electronics - Home automation - Internet of Things (IoT) devices - Wearable technology - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  • ATTINY25V-10SH: Similar specifications with reduced flash memory (2 KB).
  • ATTINY85V-10SH: Similar specifications with increased flash memory (8 KB).
  • ATTINY44V-10SH: Similar specifications with additional I/O pins (12).

These alternative models provide options with varying memory capacities and pin configurations, allowing for flexibility in choosing the most suitable microcontroller for specific applications.

In conclusion, the ATTINY45V-10SH is a compact and low-power microcontroller that offers high performance and versatile functionality. Its small form factor and efficient operation make it ideal for a wide range of electronic applications.

Texniki həllərdə ATTINY45V-10SH tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of ATTINY45V-10SH in technical solutions:

  1. Q: What is the ATTINY45V-10SH microcontroller used for? A: The ATTINY45V-10SH is a low-power, high-performance microcontroller commonly used in various embedded systems and IoT applications.

  2. Q: What is the operating voltage range of the ATTINY45V-10SH? A: The ATTINY45V-10SH operates within a voltage range of 1.8V to 5.5V.

  3. Q: How many I/O pins does the ATTINY45V-10SH have? A: The ATTINY45V-10SH has a total of 6 I/O pins, which can be configured as digital inputs or outputs.

  4. Q: Can the ATTINY45V-10SH communicate with other devices? A: Yes, the ATTINY45V-10SH supports serial communication protocols such as SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit).

  5. Q: What is the maximum clock frequency of the ATTINY45V-10SH? A: The ATTINY45V-10SH can operate at a maximum clock frequency of 10 MHz.

  6. Q: Does the ATTINY45V-10SH have built-in analog-to-digital converters (ADC)? A: Yes, the ATTINY45V-10SH has an 8-channel, 10-bit ADC for analog signal conversion.

  7. Q: Can the ATTINY45V-10SH be programmed using Arduino IDE? A: Yes, the ATTINY45V-10SH can be programmed using the Arduino IDE by selecting the appropriate board configuration.

  8. Q: What programming language is used to program the ATTINY45V-10SH? A: The ATTINY45V-10SH can be programmed using C/C++ language.

  9. Q: Is it possible to use the ATTINY45V-10SH in battery-powered applications? A: Yes, the ATTINY45V-10SH is designed for low-power applications and can be used in battery-powered devices.

  10. Q: Are there any development boards available for the ATTINY45V-10SH? A: Yes, there are various development boards available that support the ATTINY45V-10SH, such as the Digispark and Adafruit Trinket.

Please note that these answers are general and may vary depending on specific application requirements and configurations.