Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ATTINY48-AU
Ətraflı Baxın Məlumat vərəqləri

ATTINY48-AU

Product Overview

Category

ATTINY48-AU belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Versatile functionality

Package

The ATTINY48-AU comes in a surface mount package, specifically the TQFP (Thin Quad Flat Package) package.

Essence

The essence of ATTINY48-AU lies in its ability to provide efficient control and processing capabilities in a compact size.

Packaging/Quantity

The ATTINY48-AU is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller architecture: AVR
  • Flash memory: 4KB
  • RAM: 512 bytes
  • EEPROM: 256 bytes
  • Operating voltage: 1.8V - 5.5V
  • Digital I/O pins: 23
  • Analog input channels: 8
  • Timers/counters: 3
  • Communication interfaces: SPI, I2C, UART
  • Clock speed: Up to 20MHz

Detailed Pin Configuration

The ATTINY48-AU has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:

  • Pins 1-7: Digital I/O pins
  • Pins 8-15: Analog input pins
  • Pins 16-19: Power supply and ground pins
  • Pins 20-27: Digital I/O pins
  • Pins 28-31: Communication interface pins
  • Pin 32: Reset pin

Functional Features

  • Low power consumption allows for extended battery life in portable devices.
  • High-performance microcontroller capable of handling complex tasks.
  • Versatile functionality enables integration into various applications.
  • Wide operating voltage range provides flexibility in different power supply scenarios.

Advantages and Disadvantages

Advantages

  • Compact size allows for integration into space-constrained designs.
  • Low power consumption makes it suitable for battery-powered devices.
  • Versatile functionality enables a wide range of applications.
  • High-performance microcontroller ensures efficient processing.

Disadvantages

  • Limited memory capacity may restrict the complexity of programs that can be executed.
  • Lack of built-in communication protocols may require additional components for certain applications.

Working Principles

The ATTINY48-AU operates based on the AVR architecture, utilizing a combination of hardware and software to execute instructions. It follows a Von Neumann architecture, where program instructions and data are stored in the same memory space.

Detailed Application Field Plans

The ATTINY48-AU finds application in various fields, including but not limited to: - Home automation systems - Industrial control systems - Consumer electronics - Internet of Things (IoT) devices - Robotics

Detailed and Complete Alternative Models

  • ATTINY88-AU: Similar to ATTINY48-AU but with higher memory capacity.
  • ATTINY45-AU: Similar to ATTINY48-AU but with lower pin count.
  • ATTINY84-AU: Similar to ATTINY48-AU but with additional features like more I/O pins.

These alternative models provide options with varying specifications to suit different project requirements.

In conclusion, the ATTINY48-AU is a versatile microcontroller with low power consumption and high performance. Its compact size and wide range of functionalities make it suitable for various applications in different industries. While it has some limitations in terms of memory capacity and built-in communication protocols, there are alternative models available to address specific needs.

Texniki həllərdə ATTINY48-AU tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of ATTINY48-AU in technical solutions:

  1. Q: What is ATTINY48-AU? A: ATTINY48-AU is a microcontroller from the AVR family, manufactured by Atmel (now Microchip Technology). It offers 4KB of flash memory, 256 bytes of EEPROM, and 512 bytes of SRAM.

  2. Q: What are the key features of ATTINY48-AU? A: Some key features of ATTINY48-AU include 8-bit RISC architecture, low power consumption, multiple I/O pins, analog-to-digital converter (ADC), timers/counters, and serial communication interfaces.

  3. Q: What are the typical applications of ATTINY48-AU? A: ATTINY48-AU is commonly used in various embedded systems and IoT applications, such as home automation, sensor nodes, wearable devices, industrial control systems, and consumer electronics.

  4. Q: How can I program ATTINY48-AU? A: ATTINY48-AU can be programmed using various development tools, such as Atmel Studio, Arduino IDE, or other compatible programming environments. You will need an ISP programmer or a bootloader to upload your code onto the microcontroller.

  5. Q: Can ATTINY48-AU communicate with other devices? A: Yes, ATTINY48-AU supports serial communication protocols like UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface), allowing it to communicate with other devices such as sensors, displays, and wireless modules.

  6. Q: What is the power supply voltage range for ATTINY48-AU? A: The recommended power supply voltage range for ATTINY48-AU is typically between 1.8V and 5.5V, making it compatible with a wide range of power sources.

  7. Q: Can ATTINY48-AU handle analog signals? A: Yes, ATTINY48-AU has an integrated 10-bit ADC (Analog-to-Digital Converter) that allows it to convert analog signals into digital values, enabling measurement and control of analog sensors or signals.

  8. Q: How many I/O pins does ATTINY48-AU have? A: ATTINY48-AU has a total of 14 I/O pins, which can be configured as inputs or outputs, allowing for interfacing with various external components and peripherals.

  9. Q: Is ATTINY48-AU suitable for low-power applications? A: Yes, ATTINY48-AU is designed for low-power operation. It offers different sleep modes and power-saving features, making it ideal for battery-powered or energy-efficient applications.

  10. Q: Are there any development boards available for ATTINY48-AU? A: Yes, there are several development boards available that support ATTINY48-AU, such as the Arduino Nano Every, Digispark, or custom-made boards using the microcontroller. These boards provide an easy way to prototype and test your projects.

I hope these questions and answers help you understand more about the application of ATTINY48-AU in technical solutions!