Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC16C64A-04/P
Ətraflı Baxın Məlumat vərəqləri

PIC16C64A-04/P

Product Overview

Category

The PIC16C64A-04/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Low power consumption
  • High-performance RISC architecture
  • Wide operating voltage range
  • On-chip program memory
  • Multiple I/O ports
  • Timers and counters
  • Analog-to-digital converter (ADC)
  • Serial communication interface

Package

The PIC16C64A-04/P is available in a 40-pin PDIP (Plastic Dual In-line Package) format.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing functions within a compact package.

Packaging/Quantity

The PIC16C64A-04/P is typically packaged in tubes or trays, with quantities varying based on customer requirements.

Specifications

  • Operating Voltage: 2.5V to 5.5V
  • Maximum Clock Frequency: 4 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 368 bytes
  • Number of I/O Pins: 33
  • ADC Resolution: 10-bit
  • Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16C64A-04/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR - Master Clear input
  9. VSS - Ground
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. VDD - Power supply voltage
  19. RC0 - General-purpose I/O pin
  20. RC1 - General-purpose I/O pin
  21. RC2 - General-purpose I/O pin
  22. RC3 - General-purpose I/O pin
  23. RC4 - General-purpose I/O pin
  24. RC5 - General-purpose I/O pin
  25. RC6 - General-purpose I/O pin
  26. RC7 - General-purpose I/O pin
  27. OSC1 - Oscillator input
  28. OSC2 - Oscillator output
  29. VSS - Ground
  30. RD0 - General-purpose I/O pin
  31. RD1 - General-purpose I/O pin
  32. RD2 - General-purpose I/O pin
  33. RD3 - General-purpose I/O pin
  34. RD4 - General-purpose I/O pin
  35. RD5 - General-purpose I/O pin
  36. RD6 - General-purpose I/O pin
  37. RD7 - General-purpose I/O pin
  38. VDD - Power supply voltage
  39. VSS - Ground
  40. RB3/PGM - Programming mode selection

Functional Features

The PIC16C64A-04/P offers a range of functional features that enhance its usability and performance:

  1. High-performance RISC architecture allows for efficient execution of instructions.
  2. On-chip program memory enables the storage of user programs and data.
  3. Multiple I/O ports provide flexibility for interfacing with external devices.
  4. Timers and counters facilitate precise timing and event counting operations.
  5. The built-in ADC allows for analog signal conversion, expanding the microcontroller's capabilities.
  6. Serial communication interfaces (USART, SPI, I2C) enable seamless communication with other devices.

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • Wide operating voltage range enhances compatibility with various power sources.
  • High-performance RISC architecture ensures efficient execution of instructions.
  • Compact package size allows for integration into space-constrained designs.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Relatively low clock frequency may limit processing speed in demanding applications.
  • Lack of advanced peripherals compared to more modern microcontrollers.

Working Principles

The PIC16C64A-04/P operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its program memory, manipulating data from registers and interacting with

Texniki həllərdə PIC16C64A-04/P tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum clock frequency of PIC16C64A-04/P?
    - The maximum clock frequency of PIC16C64A-04/P is 4 MHz.

  2. How many I/O pins does PIC16C64A-04/P have?
    - PIC16C64A-04/P has a total of 22 I/O pins.

  3. What is the program memory size of PIC16C64A-04/P?
    - The program memory size of PIC16C64A-04/P is 7 KB.

  4. Can PIC16C64A-04/P be used for analog input/output applications?
    - Yes, PIC16C64A-04/P has analog input/output capabilities.

  5. What are the communication interfaces supported by PIC16C64A-04/P?
    - PIC16C64A-04/P supports USART and SPI communication interfaces.

  6. Is PIC16C64A-04/P suitable for battery-powered applications?
    - Yes, PIC16C64A-04/P is suitable for battery-powered applications due to its low power consumption.

  7. Does PIC16C64A-04/P have built-in timers/counters?
    - Yes, PIC16C64A-04/P features multiple built-in timers/counters.

  8. Can PIC16C64A-04/P be programmed using C language?
    - Yes, PIC16C64A-04/P can be programmed using C language with appropriate compilers.

  9. What are the available development tools for PIC16C64A-04/P?
    - Development tools such as MPLAB IDE and PICkit programmers are available for PIC16C64A-04/P.

  10. Is PIC16C64A-04/P suitable for industrial control applications?
    - Yes, PIC16C64A-04/P is suitable for industrial control applications due to its robust features and reliability.