PIC16F15386-I/PT

Product Overview

Category

The PIC16F15386-I/PT belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for control and processing tasks.

Characteristics

• Low power consumption
• High performance
• Small form factor
• Wide operating voltage range
• Rich peripheral integration

Package

The PIC16F15386-I/PT is available in a PT package, which stands for TQFP (Thin Quad Flat Package). This package provides ease of soldering and compactness.

Essence

The essence of the PIC16F15386-I/PT lies in its ability to provide efficient control and processing capabilities in a small and low-power package.

Packaging/Quantity

The PIC16F15386-I/PT is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Microcontroller architecture: 8-bit
• CPU speed: Up to 32 MHz
• Program memory size: 14 KB
• RAM size: 1.5 KB
• Number of I/O pins: 25
• Analog-to-digital converter (ADC) channels: 11
• Timers: 3
• Communication interfaces: UART, SPI, I2C
• Operating voltage range: 1.8V to 5.5V
• Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The PIC16F15386-I/PT has a total of 25 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. VSS - Ground
9. RC0 - General-purpose I/O pin
10. RC1 - General-purpose I/O pin
11. RC2 - General-purpose I/O pin
12. RC3 - General-purpose I/O pin
13. RC4 - General-purpose I/O pin
14. RC5 - General-purpose I/O pin
15. RC6 - General-purpose I/O pin
16. RC7 - General-purpose I/O pin
17. OSC1/CLKIN - Oscillator input/clock input
18. OSC2/CLKOUT - Oscillator output/clock output
19. RB0 - General-purpose I/O pin
20. RB1 - General-purpose I/O pin
21. RB2 - General-purpose I/O pin
22. RB3 - General-purpose I/O pin
23. RB4 - General-purpose I/O pin
24. RB5 - General-purpose I/O pin
25. MCLR/VPP - Master Clear/Voltage Programming Pin

Functional Features

The PIC16F15386-I/PT offers several functional features that enhance its usability and performance:

• Enhanced core with 49 instructions
• Flash memory for program storage
• EEPROM data memory for non-volatile storage
• Integrated analog-to-digital converter (ADC)
• Multiple communication interfaces (UART, SPI, I2C)
• Timers for precise timing control
• Interrupt capability for event-driven programming
• Low-power modes for energy efficiency
• Built-in oscillator for clock generation

Advantages and Disadvantages

Advantages

• Compact size allows for integration into space-constrained designs
• Low power consumption extends battery life in portable devices
• Wide operating voltage range provides flexibility in power supply options
• Rich peripheral integration reduces the need for external components
• High-performance core enables efficient processing of tasks

Disadvantages

• Limited program memory size may restrict the complexity of applications
• Relatively small RAM size may limit the amount of data that can be stored
• Lack of advanced features found in higher-end microcontrollers

Working Principles

The PIC16F15386-I/PT operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with peripherals and I/O pins, and responds to external events through interrupts. The integrated core handles data processing, while the various peripherals enable communication, timing, and analog-to-digital conversion.

Detailed Application Field Plans

The PIC16F15386-I/PT finds application in various fields, including but not limited to:

1. Home automation systems
2. Industrial control systems
3. Automotive electronics
4. Medical devices
5. Consumer electronics
6. Internet of Things (IoT) devices
7. Robotics
8. Sensor networks

Detailed and Complete Alternative Models

While the PIC16F153