Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC16F1776-E/SP
Ətraflı Baxın Məlumat vərəqləri

PIC16F1776-E/SP

Product Overview

Category

The PIC16F1776-E/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit RISC architecture
  • Flash program memory with self-read/write capability
  • Enhanced mid-range core with 49 instructions
  • Wide operating voltage range: 2.3V to 5.5V
  • Low power consumption
  • Integrated peripherals for versatile applications
  • Robust communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter (ADC) for precise measurements
  • Timers and PWM modules for accurate timing control

Package

The PIC16F1776-E/SP is available in a small outline package (SP) format.

Essence

The essence of this microcontroller lies in its ability to provide a cost-effective solution for various applications requiring control and processing capabilities.

Packaging/Quantity

The PIC16F1776-E/SP is typically packaged in tubes or trays, with a quantity of 25 units per tube/tray.

Specifications

  • CPU Speed: Up to 32 MHz
  • Program Memory Size: 14 KB
  • RAM Size: 1 KB
  • Number of I/O Pins: 28
  • Operating Voltage Range: 2.3V to 5.5V
  • ADC Resolution: 10-bit
  • Communication Interfaces: UART, SPI, I2C
  • Timers: 3 x 8-bit, 1 x 16-bit
  • PWM Modules: 2
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC16F1776-E/SP has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. RA0 - Analog Input/Output
  2. RA1 - Analog Input/Output
  3. RA2 - Analog Input/Output
  4. RA3 - Analog Input/Output
  5. RA4 - Digital Input/Output
  6. RA5 - Digital Input/Output
  7. VSS - Ground
  8. VDD - Power Supply
  9. RB0 - Digital Input/Output
  10. RB1 - Digital Input/Output
  11. RB2 - Digital Input/Output
  12. RB3 - Digital Input/Output
  13. RB4 - Digital Input/Output
  14. RB5 - Digital Input/Output
  15. RB6 - Digital Input/Output
  16. RB7 - Digital Input/Output
  17. RC0 - Digital Input/Output
  18. RC1 - Digital Input/Output
  19. RC2 - Digital Input/Output
  20. RC3 - Digital Input/Output
  21. RC4 - Digital Input/Output
  22. RC5 - Digital Input/Output
  23. RC6 - Digital Input/Output
  24. RC7 - Digital Input/Output
  25. OSC1/CLKIN - Oscillator Input
  26. OSC2/CLKOUT - Oscillator Output
  27. MCLR/VPP - Master Clear/Input Voltage Programming
  28. AN3/VREF-/CVREF - Analog Input/Reference Voltage

Functional Features

The PIC16F1776-E/SP offers a range of functional features that enhance its usability and performance. Some notable features include:

  • Flash program memory for storing user code
  • EEPROM data memory for non-volatile storage
  • Enhanced mid-range core with 49 instructions for efficient execution
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • Analog-to-Digital Converter (ADC) for precise analog measurements
  • Timers and PWM modules for accurate timing control and signal generation
  • Interrupt capability for handling real-time events
  • Low power consumption modes for energy-efficient operation

Advantages and Disadvantages

Advantages

  • High-performance 8-bit RISC architecture
  • Wide operating voltage range allows flexibility in power supply selection
  • Integrated peripherals simplify circuit design and reduce external component count
  • Flash program memory with self-read/write capability enables easy firmware updates
  • Low power consumption extends battery life in portable applications

Disadvantages

  • Limited program memory size (14 KB) may restrict the complexity of applications
  • Limited RAM size (1 KB) may impose constraints on data storage and manipulation
  • Lack of advanced features found in higher-end microcontrollers

Working Principles

The PIC16F1776-E/SP operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with various peripherals, and responds to external stimuli. The central processing unit (CPU) fetches instructions, decodes them, and performs the necessary operations. The microcontroller's integrated peripherals enable

Texniki həllərdə PIC16F1776-E/SP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum clock frequency of PIC16F1776-E/SP?
    - The maximum clock frequency of PIC16F1776-E/SP is 32 MHz.

  2. Can PIC16F1776-E/SP be used for motor control applications?
    - Yes, PIC16F1776-E/SP can be used for motor control applications with its integrated PWM modules and analog-to-digital converters.

  3. Does PIC16F1776-E/SP support communication protocols like I2C and SPI?
    - Yes, PIC16F1776-E/SP supports both I2C and SPI communication protocols.

  4. What are the available memory options for program storage in PIC16F1776-E/SP?
    - PIC16F1776-E/SP offers flash program memory of up to 14 KB.

  5. Can PIC16F1776-E/SP be used in battery-powered applications?
    - Yes, PIC16F1776-E/SP is suitable for battery-powered applications due to its low power consumption features.

  6. Is there an integrated analog-to-digital converter (ADC) in PIC16F1776-E/SP?
    - Yes, PIC16F1776-E/SP includes a 10-bit ADC with multiple channels.

  7. What development tools are available for programming PIC16F1776-E/SP?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC16F1776-E/SP.

  8. Can PIC16F1776-E/SP be used in temperature sensing applications?
    - Yes, PIC16F1776-E/SP can be used in temperature sensing applications with its analog input and ADC capabilities.

  9. Are there any built-in security features in PIC16F1776-E/SP?
    - Yes, PIC16F1776-E/SP offers various security features such as code protection and data EEPROM memory.

  10. What are the available package options for PIC16F1776-E/SP?
    - PIC16F1776-E/SP is available in a 28-pin SPDIP package.