Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC16F1823-E/P
Ətraflı Baxın Məlumat vərəqləri

PIC16F1823-E/P

Product Overview

Category

The PIC16F1823-E/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Wide operating voltage range
  • Enhanced peripheral integration

Package

The PIC16F1823-E/P is available in a 14-pin plastic dual inline package (PDIP).

Essence

The essence of the PIC16F1823-E/P lies in its ability to provide efficient and reliable control and processing capabilities in a compact package.

Packaging/Quantity

The PIC16F1823-E/P is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Microcontroller architecture: 8-bit
  • CPU speed: Up to 32 MHz
  • Program memory size: 3.5 KB
  • RAM size: 256 bytes
  • Number of I/O pins: 12
  • Analog-to-digital converter (ADC): 10-bit resolution, 8 channels
  • Timers: 2 x 8-bit, 1 x 16-bit
  • Communication interfaces: USART, SPI, I2C
  • Operating voltage range: 2.3V to 5.5V
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The PIC16F1823-E/P has a total of 14 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA5/AN4/T1CKI/C1OUT - General-purpose I/O pin / Analog input / Timer1 clock input / Comparator output
  3. RA4/AN3/T1G/C2OUT - General-purpose I/O pin / Analog input / Timer1 gate input / Comparator output
  4. RA3/AN2/VREF-/C3OUT - General-purpose I/O pin / Analog input / Negative voltage reference input / Comparator output
  5. RA2/AN1/VREF+/CVREF/C4OUT - General-purpose I/O pin / Analog input / Positive voltage reference input / Comparator output
  6. RA1/AN0/CVREF/C2IN- - General-purpose I/O pin / Analog input / Comparator input
  7. RA0/AN11/C1IN+ - General-purpose I/O pin / Analog input / Comparator input
  8. VSS - Ground
  9. RC5/T1OSO/T1CKI/CCP1 - General-purpose I/O pin / Timer1 oscillator output / Timer1 clock input / Capture/Compare/PWM pin
  10. RC4/T1OSI/CCP2 - General-purpose I/O pin / Timer1 oscillator input / Capture/Compare/PWM pin
  11. RC3/SCL/CCP3 - General-purpose I/O pin / I2C clock input / Capture/Compare/PWM pin
  12. RC2/SDA/CCP4 - General-purpose I/O pin / I2C data input/output / Capture/Compare/PWM pin
  13. RC1/CCP2 - General-purpose I/O pin / Capture/Compare/PWM pin
  14. RC0/CCP1 - General-purpose I/O pin / Capture/Compare/PWM pin

Functional Features

The PIC16F1823-E/P offers a range of functional features, including:

  • Enhanced core architecture for improved performance
  • Integrated peripherals such as timers, ADC, and communication interfaces
  • Low power consumption modes for energy efficiency
  • Flexible I/O configuration options
  • On-chip debugging support for easy development and troubleshooting

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable and battery-powered applications.
  • Enhanced peripheral integration reduces the need for external components, saving cost and board space.
  • Wide operating voltage range allows for compatibility with various power supply sources.
  • On-chip debugging support simplifies development and debugging processes.

Disadvantages

  • Limited program memory size may restrict the complexity of applications that can be implemented.
  • Limited number of I/O pins may pose limitations in projects requiring a large number of external connections.
  • Lack of built-in non-volatile memory may require external storage solutions for data retention.

Working Principles

The PIC16F1823-E/P operates based on an 8-bit microcontroller architecture. It executes instructions stored in its program memory to perform various tasks. The microcontroller interacts with external devices through its I/O pins and utilizes its integrated peripherals to handle tasks such as analog-to-digital conversion, timing, and communication.

Detailed Application Field Plans

The PIC16F1823-E/P finds applications in various fields, including:

Texniki həllərdə PIC16F1823-E/P tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the maximum operating frequency of PIC16F1823-E/P?
    Answer: The maximum operating frequency of PIC16F1823-E/P is 32 MHz.

  2. Question: Can PIC16F1823-E/P be used for motor control applications?
    Answer: Yes, PIC16F1823-E/P can be used for motor control applications with its integrated PWM module.

  3. Question: What are the available communication interfaces on PIC16F1823-E/P?
    Answer: PIC16F1823-E/P supports SPI, I2C, and UART communication interfaces.

  4. Question: Is PIC16F1823-E/P suitable for battery-powered applications?
    Answer: Yes, PIC16F1823-E/P is suitable for battery-powered applications due to its low power consumption features.

  5. Question: Can PIC16F1823-E/P be programmed using C language?
    Answer: Yes, PIC16F1823-E/P can be programmed using C language with the appropriate compiler.

  6. Question: What are the available analog-to-digital converter (ADC) channels on PIC16F1823-E/P?
    Answer: PIC16F1823-E/P has 10-bit ADC with up to 12 channels.

  7. Question: Does PIC16F1823-E/P have built-in EEPROM memory?
    Answer: Yes, PIC16F1823-E/P has 256 bytes of EEPROM memory.

  8. Question: Can PIC16F1823-E/P be used in temperature sensing applications?
    Answer: Yes, PIC16F1823-E/P can be used in temperature sensing applications with external temperature sensors.

  9. Question: What are the available timer modules on PIC16F1823-E/P?
    Answer: PIC16F1823-E/P has multiple timer modules including Timer0, Timer1, and Timer2.

  10. Question: Is PIC16F1823-E/P suitable for automotive applications?
    Answer: Yes, PIC16F1823-E/P is suitable for automotive applications with its wide operating voltage range and robust features.