Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC16F723A-I/MV
Ətraflı Baxın Məlumat vərəqləri

PIC16F723A-I/MV

Product Overview

Category

The PIC16F723A-I/MV belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

  • High-performance 8-bit RISC architecture
  • Flash program memory with self-read/write capability
  • Low power consumption
  • Wide operating voltage range
  • Multiple communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter (ADC) module
  • Timers and PWM modules for precise timing control
  • Enhanced Capture/Compare/PWM (ECCP) module for motor control applications

Package

The PIC16F723A-I/MV is available in a compact 28-pin package.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic applications.

Packaging/Quantity

The PIC16F723A-I/MV is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • CPU Speed: Up to 20 MHz
  • Program Memory Size: 7 KB
  • RAM Size: 256 bytes
  • Number of I/O Pins: 25
  • Operating Voltage Range: 1.8V to 5.5V
  • ADC Resolution: 10-bit
  • Number of Timers: 3
  • PWM Channels: 2
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC16F723A-I/MV has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RB0/INT - General-purpose I/O pin / External interrupt input
  18. RB1 - General-purpose I/O pin
  19. RB2 - General-purpose I/O pin
  20. RB3 - General-purpose I/O pin
  21. RB4 - General-purpose I/O pin
  22. RB5 - General-purpose I/O pin
  23. RB6 - General-purpose I/O pin
  24. RB7 - General-purpose I/O pin
  25. MCLR/VPP - Master Clear input / Programming voltage supply
  26. PGD - Programming/Data pin
  27. PGC - Programming/Clock pin
  28. VDD - Power supply voltage

Functional Features

The PIC16F723A-I/MV offers several functional features that enhance its performance and versatility:

  1. Flash Program Memory: Allows for easy reprogramming of the microcontroller.
  2. Low Power Consumption: Enables energy-efficient operation, making it suitable for battery-powered devices.
  3. Communication Interfaces: UART, SPI, and I2C interfaces facilitate seamless communication with other devices.
  4. Analog-to-Digital Converter (ADC): Provides accurate conversion of analog signals into digital values.
  5. Timers and PWM Modules: Enable precise timing control and generation of Pulse Width Modulation (PWM) signals.
  6. Enhanced Capture/Compare/PWM (ECCP) Module: Specifically designed for motor control applications, offering advanced features for motor speed and direction control.

Advantages and Disadvantages

Advantages

  • High-performance RISC architecture ensures efficient processing capabilities.
  • Flash program memory allows for easy reprogramming and updates.
  • Low power consumption extends battery life in portable devices.
  • Wide operating voltage range provides flexibility in various applications.
  • Multiple communication interfaces enable seamless integration with other devices.
  • Timers and PWM modules offer precise timing control for accurate operations.
  • ECCP module enhances motor control applications.

Disadvantages

  • Limited program memory size may restrict the complexity of certain applications.
  • Limited RAM size may impose constraints on data storage and manipulation.
  • The 8-bit architecture may not be suitable for computationally intensive tasks.

Working Principles

The PIC16F723A-I/MV operates based on the principles of a microcontroller. It executes instructions stored in its program memory to perform specific tasks. The CPU fetches instructions

Texniki həllərdə PIC16F723A-I/MV tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum operating frequency of PIC16F723A-I/MV?
    - The maximum operating frequency of PIC16F723A-I/MV is 20 MHz.

  2. Can PIC16F723A-I/MV be used for motor control applications?
    - Yes, PIC16F723A-I/MV can be used for motor control applications with its integrated PWM modules.

  3. What are the available communication interfaces on PIC16F723A-I/MV?
    - PIC16F723A-I/MV features USART, SPI, and I2C communication interfaces.

  4. Is it possible to program PIC16F723A-I/MV using C language?
    - Yes, PIC16F723A-I/MV can be programmed using C language with the appropriate compiler.

  5. What is the maximum number of I/O pins on PIC16F723A-I/MV?
    - PIC16F723A-I/MV has a total of 18 I/O pins.

  6. Can PIC16F723A-I/MV operate at low power?
    - Yes, PIC16F723A-I/MV features low-power modes for energy-efficient operation.

  7. Does PIC16F723A-I/MV have built-in analog-to-digital converters (ADC)?
    - Yes, PIC16F723A-I/MV includes 10-bit ADC modules for analog signal processing.

  8. What is the flash memory size of PIC16F723A-I/MV?
    - PIC16F723A-I/MV has 7 KB of flash memory for program storage.

  9. Can PIC16F723A-I/MV be used in automotive applications?
    - Yes, PIC16F723A-I/MV is suitable for automotive applications with its robust design and temperature range.

  10. Are there any development boards available for PIC16F723A-I/MV?
    - Yes, there are development boards specifically designed for PIC16F723A-I/MV to aid in prototyping and testing.