Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC16F882T-I/ML
Ətraflı Baxın Məlumat vərəqləri

PIC16F882T-I/ML

Introduction

The PIC16F882T-I/ML is a microcontroller belonging to the PIC16F series, which is manufactured by Microchip Technology. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: The PIC16F882T-I/ML is commonly used in embedded systems for various applications such as industrial control, consumer electronics, automotive, and more.
  • Characteristics: It features low power consumption, high performance, and versatile input/output capabilities.
  • Package: The PIC16F882T-I/ML is available in a 28-pin QFN package.
  • Essence: This microcontroller is designed to provide efficient processing and control capabilities in embedded systems.
  • Packaging/Quantity: It is typically supplied in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

The PIC16F882T-I/ML microcontroller offers the following key specifications: - Operating Voltage: 2.0V to 5.5V - Flash Memory: 3.5 KB - SRAM: 256 Bytes - I/O Pins: 22 - Timers: 3 - Analog-to-Digital Converter (ADC): 10-bit, 7 channels - Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

The detailed pin configuration of the PIC16F882T-I/ML microcontroller is as follows: 1. VDD 2. RA0/AN0/CIN+/CVREF/VREF- 3. RA1/AN1/CIN-/VREF+ 4. RA2/AN2/VREF+/CVREF 5. RA3/AN3/VREF- 6. RA4/T0CKI/C1OUT 7. RA5/AN4/SS/C2OUT 8. RE0/RD/AN5 9. RE1/WR/AN6 10. RE2/CS/AN7 11. VSS 12. RB0/INT/CNIV 13. RB1/SDI/SDA 14. RB2/SDO 15. RB3/SCK/SCL 16. RB4/PGM 17. RB5/PGC 18. RB6/PGD 19. RB7/T1OSO/T1CKI 20. RB8/T1OSI/CCP2 21. RB9/T1CKI/CCP1 22. RB10/PWM/CCP2

Functional Features

The PIC16F882T-I/ML microcontroller offers the following functional features: - High-performance RISC CPU - Low-power consumption - Enhanced flash program memory - Versatile analog and digital peripherals - Enhanced capture/compare/PWM (ECCP) module - Brown-out Reset (BOR) - Power-on Reset (POR) - Watchdog Timer (WDT)

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • Versatile input/output capabilities enable flexible interfacing with external devices.
  • Enhanced flash program memory allows for efficient program storage and execution.

Disadvantages

  • Limited on-chip memory may restrict the complexity of applications that can be implemented.
  • The 28-pin package may not be suitable for space-constrained designs.

Working Principles

The PIC16F882T-I/ML microcontroller operates based on the principles of embedded system design, utilizing its RISC architecture to execute programmed instructions and interact with external components through its I/O pins and communication interfaces.

Detailed Application Field Plans

The PIC16F882T-I/ML microcontroller is well-suited for a wide range of applications, including but not limited to: - Industrial control systems - Consumer electronics - Automotive electronics - Home automation - Sensor interfacing - Motor control

Detailed and Complete Alternative Models

Some alternative models to the PIC16F882T-I/ML microcontroller include: - PIC16F883 - PIC16F884 - PIC16F886 - PIC16F887

These alternative models offer varying levels of performance, memory, and peripheral features, providing designers with options to best suit their specific application requirements.

In conclusion, the PIC16F882T-I/ML microcontroller from Microchip Technology is a versatile and efficient solution for embedded system development, offering a balance of performance, power consumption, and peripheral capabilities.

Word count: 611

Texniki həllərdə PIC16F882T-I/ML tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum clock frequency of PIC16F882T-I/ML?
    - The maximum clock frequency of PIC16F882T-I/ML is 20 MHz.

  2. Can PIC16F882T-I/ML be used for motor control applications?
    - Yes, PIC16F882T-I/ML can be used for motor control applications with appropriate interfacing and programming.

  3. What are the communication interfaces supported by PIC16F882T-I/ML?
    - PIC16F882T-I/ML supports USART, SPI, and I2C communication interfaces.

  4. Is PIC16F882T-I/ML suitable for battery-powered applications?
    - Yes, PIC16F882T-I/ML is suitable for battery-powered applications due to its low power consumption features.

  5. Can PIC16F882T-I/ML be programmed using C language?
    - Yes, PIC16F882T-I/ML can be programmed using C language with the appropriate compiler and development tools.

  6. What are the available analog-to-digital converter (ADC) channels in PIC16F882T-I/ML?
    - PIC16F882T-I/ML has 10-bit ADC with 8 channels for analog input.

  7. Does PIC16F882T-I/ML have built-in EEPROM memory?
    - Yes, PIC16F882T-I/ML has 256 bytes of EEPROM memory for data storage.

  8. Can PIC16F882T-I/ML be used in temperature sensing applications?
    - Yes, PIC16F882T-I/ML can be used in temperature sensing applications with external temperature sensors.

  9. What are the available timer modules in PIC16F882T-I/ML?
    - PIC16F882T-I/ML has multiple timer modules including Timer0, Timer1, and Timer2.

  10. Is PIC16F882T-I/ML suitable for industrial automation applications?
    - Yes, PIC16F882T-I/ML is suitable for industrial automation applications due to its robust features and peripherals.