Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC16LF73-I/ML
Ətraflı Baxın Məlumat vərəqləri

PIC16LF73-I/ML

Product Overview

Category

The PIC16LF73-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Wide operating voltage range
  • Enhanced peripheral integration

Package

The PIC16LF73-I/ML is available in a small outline 28-pin package (ML) which is suitable for surface mount applications.

Essence

The essence of the PIC16LF73-I/ML lies in its ability to provide efficient control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The PIC16LF73-I/ML is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller architecture: 8-bit
  • CPU speed: Up to 20 MHz
  • Program memory size: 7 KB
  • RAM size: 192 bytes
  • Number of I/O pins: 22
  • Analog-to-digital converter (ADC): 8 channels, 10-bit resolution
  • Timers: 3 timers/counters
  • Communication interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16LF73-I/ML has a total of 28 pins. The pin configuration is as follows:

  1. VDD - Power supply
  2. RA0/AN0 - Analog input / Digital I/O
  3. RA1/AN1 - Analog input / Digital I/O
  4. RA2/AN2 - Analog input / Digital I/O
  5. RA3/AN3/VREF-/CVREF - Analog input / Digital I/O
  6. RA4/T0CKI/C1OUT - Timer0 clock input / Digital I/O
  7. RA5/AN4/SS - Analog input / Slave select for SPI
  8. RE0/RD/AN5 - Reset input / Read control / Analog input
  9. RE1/WR/AN6 - Write control / Analog input
  10. RE2/CS/AN7 - Chip select / Analog input
  11. VSS - Ground
  12. OSC1/CLKIN - Oscillator input
  13. OSC2/CLKOUT - Oscillator output
  14. RC0/T1OSO/T1CKI - Timer1 oscillator output / Timer1 clock input
  15. RC1/T1OSI/CCP2 - Timer1 oscillator input / Capture/Compare/PWM 2
  16. RC2/CCP1 - Capture/Compare/PWM 1
  17. RC3/SCK/SCL - Serial clock for SPI/I2C
  18. RC4/SDI/SDA - Serial data input for SPI/I2C
  19. RC5/SDO - Serial data output for SPI
  20. RC6/TX/CK - USART transmit / Clock for synchronous mode
  21. RC7/RX/DT - USART receive / Data for synchronous mode
  22. RD0/PSP0 - Parallel slave port bit 0
  23. RD1/PSP1 - Parallel slave port bit 1
  24. RD2/PSP2 - Parallel slave port bit 2
  25. RD3/PSP3 - Parallel slave port bit 3
  26. RD4/PSP4 - Parallel slave port bit 4
  27. RD5/PSP5 - Parallel slave port bit 5
  28. RD6/PSP6 - Parallel slave port bit 6

Functional Features

The PIC16LF73-I/ML offers the following functional features:

  • High-performance RISC CPU
  • Flash program memory
  • EEPROM data memory
  • Enhanced capture/compare/PWM (CCP) modules
  • Analog-to-digital converter (ADC)
  • Timers and counters
  • USART, SPI, and I2C communication interfaces
  • Parallel slave port (PSP)

Advantages and Disadvantages

Advantages

  • Low power consumption enables energy-efficient designs.
  • High-performance CPU allows for fast data processing.
  • Small form factor saves space in compact electronic devices.
  • Wide operating voltage range provides flexibility in various applications.
  • Enhanced peripheral integration simplifies system design.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Limited RAM size may impose constraints on data storage.
  • 8-bit architecture may not be suitable for certain demanding applications.

Working Principles

The PIC16LF73-I/ML operates based on the principles of a microcontroller. It executes instructions stored in its program memory to perform various tasks. The CPU fetches instructions, decodes them, and executes them sequentially. Input/output operations, timers, and other peripherals are controlled by the CPU to interact

Texniki həllərdə PIC16LF73-I/ML tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the operating voltage range of PIC16LF73-I/ML?
    - The operating voltage range of PIC16LF73-I/ML is 2.0V to 5.5V.

  2. Can PIC16LF73-I/ML be used in battery-powered applications?
    - Yes, PIC16LF73-I/ML can be used in battery-powered applications due to its low power consumption.

  3. What are the key features of PIC16LF73-I/ML?
    - Some key features of PIC16LF73-I/ML include 7 KB Flash program memory, 192 bytes of RAM, and 22 I/O pins.

  4. Is PIC16LF73-I/ML suitable for temperature-sensitive applications?
    - Yes, PIC16LF73-I/ML is suitable for temperature-sensitive applications as it has a wide operating temperature range.

  5. Can PIC16LF73-I/ML be programmed using a standard programmer?
    - Yes, PIC16LF73-I/ML can be programmed using a standard programmer that supports in-circuit serial programming (ICSP).

  6. What communication interfaces does PIC16LF73-I/ML support?
    - PIC16LF73-I/ML supports USART, SPI, and I2C communication interfaces.

  7. Does PIC16LF73-I/ML have built-in analog-to-digital converters (ADC)?
    - Yes, PIC16LF73-I/ML has a 10-bit ADC with multiple channels.

  8. Can PIC16LF73-I/ML be used in motor control applications?
    - Yes, PIC16LF73-I/ML can be used in motor control applications with its pulse-width modulation (PWM) modules.

  9. What development tools are available for PIC16LF73-I/ML?
    - Development tools such as MPLAB X IDE and MPLAB Code Configurator support PIC16LF73-I/ML.

  10. Is PIC16LF73-I/ML suitable for industrial automation applications?
    - Yes, PIC16LF73-I/ML is suitable for industrial automation applications due to its robust design and peripheral features.