Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18F24J11-I/ML
Ətraflı Baxın Məlumat vərəqləri

PIC18F24J11-I/ML

Product Overview

Category

The PIC18F24J11-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit architecture
  • Flash memory for program storage
  • Integrated peripherals for enhanced functionality
  • Low power consumption
  • Wide operating voltage range
  • Small form factor

Package

The PIC18F24J11-I/ML is available in a small outline 28-pin package (ML) which is suitable for compact designs.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The PIC18F24J11-I/ML is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Architecture: 8-bit
  • Program Memory Size: 16 KB
  • RAM Size: 1.5 KB
  • Number of I/O Pins: 25
  • Operating Voltage Range: 2.3V to 5.5V
  • Maximum Speed: 32 MHz
  • Data EEPROM Size: 256 bytes
  • ADC Channels: 10-bit, 13 channels
  • Timers: 8-bit and 16-bit timers
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC18F24J11-I/ML has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RC6 - General-purpose I/O pin
  18. RC7 - General-purpose I/O pin
  19. RB0 - General-purpose I/O pin
  20. RB1 - General-purpose I/O pin
  21. RB2 - General-purpose I/O pin
  22. RB3 - General-purpose I/O pin
  23. RB4 - General-purpose I/O pin
  24. RB5 - General-purpose I/O pin
  25. RB6 - General-purpose I/O pin
  26. RB7 - General-purpose I/O pin
  27. MCLR/VPP - Master Clear/Voltage Programming Pin
  28. VSS - Ground

Functional Features

The PIC18F24J11-I/ML microcontroller offers several functional features, including:

  • High-performance CPU for efficient data processing
  • Flash memory for storing program code
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Timers for precise timing operations
  • Low-power modes for energy efficiency
  • Enhanced security features for protecting sensitive data

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices
  • Wide operating voltage range allows for flexibility in power supply
  • Integrated peripherals reduce the need for external components
  • High-performance CPU enables efficient data processing

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Limited RAM size may impose constraints on data storage and manipulation
  • Lack of advanced features found in higher-end microcontrollers

Working Principles

The PIC18F24J11-I/ML operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through its I/O pins, and utilizes its integrated peripherals to perform various tasks. The microcontroller follows a sequential execution model, where it fetches, decodes, and executes instructions one by one.

Detailed Application Field Plans

The PIC18F24J11-I/ML finds applications in various fields, including:

  1. Consumer Electronics: Used in remote controls, smart home devices, and wearable technology.
  2. Industrial Automation: Employed in control systems, monitoring devices, and robotics.
  3. Automotive: Utilized in engine management systems, dashboard displays, and infotainment systems.
  4. Medical Devices

Texniki həllərdə PIC18F24J11-I/ML tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum operating frequency of PIC18F24J11-I/ML?
    - The maximum operating frequency of PIC18F24J11-I/ML is 32 MHz.

  2. What are the key features of PIC18F24J11-I/ML?
    - Some key features of PIC18F24J11-I/ML include 16KB Flash program memory, 768 bytes of RAM, and 256 bytes of EEPROM data memory.

  3. Can PIC18F24J11-I/ML be used for battery-powered applications?
    - Yes, PIC18F24J11-I/ML is suitable for battery-powered applications due to its low power consumption features.

  4. What communication interfaces are supported by PIC18F24J11-I/ML?
    - PIC18F24J11-I/ML supports SPI, I2C, and UART communication interfaces.

  5. Is PIC18F24J11-I/ML suitable for industrial control applications?
    - Yes, PIC18F24J11-I/ML is well-suited for industrial control applications due to its robust design and communication capabilities.

  6. Can PIC18F24J11-I/ML be programmed using C language?
    - Yes, PIC18F24J11-I/ML can be programmed using C language with the appropriate compiler and development tools.

  7. What are the available development tools for PIC18F24J11-I/ML?
    - Development tools such as MPLAB X IDE and PICkit programmers are commonly used for programming and debugging PIC18F24J11-I/ML.

  8. Does PIC18F24J11-I/ML have built-in analog-to-digital converters (ADC)?
    - Yes, PIC18F24J11-I/ML features built-in 10-bit ADC modules for analog signal processing.

  9. Can PIC18F24J11-I/ML be used in temperature sensing applications?
    - Yes, PIC18F24J11-I/ML can be used in temperature sensing applications with the integration of external temperature sensors.

  10. What are the recommended operating conditions for PIC18F24J11-I/ML?
    - The recommended operating voltage range for PIC18F24J11-I/ML is 2.0V to 3.6V, making it suitable for various technical solutions.