Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18F24J11T-I/SO
Product Overview
Category
The PIC18F24J11T-I/SO belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.
Characteristics
- High-performance 8-bit architecture
- Low power consumption
- Integrated peripherals for enhanced functionality
- Ample program memory and data storage capacity
- Flexible input/output options
- Robust communication interfaces
Package
The PIC18F24J11T-I/SO is available in a small outline (SO) package, which ensures easy integration into circuit boards.
Essence
The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of applications.
Packaging/Quantity
The PIC18F24J11T-I/SO is typically packaged in reels or tubes, with each containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.
Specifications
- Microcontroller family: PIC18F
- Model number: 24J11T
- Operating voltage: 2.0V to 5.5V
- Clock frequency: Up to 64 MHz
- Program memory size: 16 KB
- RAM size: 1 KB
- Number of I/O pins: 23
- Communication interfaces: UART, SPI, I2C
- Analog-to-digital converter (ADC) resolution: 10-bit
- Timers/Counters: 3
- PWM channels: 2
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
The PIC18F24J11T-I/SO microcontroller has a total of 28 pins. The pin configuration is as follows:
- VDD - Power supply voltage
- RA0 - General-purpose I/O pin
- RA1 - General-purpose I/O pin
- RA2 - General-purpose I/O pin
- RA3 - General-purpose I/O pin
- RA4 - General-purpose I/O pin
- RA5 - General-purpose I/O pin
- VSS - Ground
- OSC1/CLKIN - Oscillator input
- OSC2/CLKOUT - Oscillator output
- RC0 - General-purpose I/O pin
- RC1 - General-purpose I/O pin
- RC2 - General-purpose I/O pin
- RC3 - General-purpose I/O pin
- RC4 - General-purpose I/O pin
- RC5 - General-purpose I/O pin
- RB0/INT0 - General-purpose I/O pin / External interrupt 0
- RB1/INT1 - General-purpose I/O pin / External interrupt 1
- RB2/INT2 - General-purpose I/O pin / External interrupt 2
- RB3/CCP2 - General-purpose I/O pin / Capture/Compare/PWM 2
- RB4/SDI - General-purpose I/O pin / Serial Data Input
- RB5/SDO - General-purpose I/O pin / Serial Data Output
- RB6/SCK - General-purpose I/O pin / Serial Clock
- RB7/PGC - General-purpose I/O pin / Programming Clock
- RB8/PGD - General-purpose I/O pin / Programming Data
- RB9/TX - General-purpose I/O pin / Transmit Data
- RB10/RX - General-purpose I/O pin / Receive Data
- MCLR/VPP - Master Clear / Programming Voltage
Functional Features
- High-speed processing capabilities
- Multiple communication interfaces for seamless data transfer
- Flexible I/O options for interfacing with external devices
- Integrated analog-to-digital converter for precise measurements
- Timers and counters for accurate timing operations
- PWM channels for generating analog signals
- Low-power modes for energy-efficient operation
- Enhanced security features for protecting sensitive data
Advantages and Disadvantages
Advantages
- High-performance microcontroller suitable for a wide range of applications
- Low power consumption extends battery life in portable devices
- Ample program memory and data storage capacity for complex applications
- Integrated peripherals reduce the need for external components
- Robust communication interfaces enable seamless connectivity
Disadvantages
- Limited number of I/O pins may restrict the complexity of certain projects
- Higher cost compared to some other microcontrollers with similar specifications
- Steeper learning curve for beginners due to advanced features and capabilities
Working Principles
The PIC18F24J11T-I/SO microcontroller operates based on the principles of digital logic and embedded systems. It executes instructions stored in its program memory, processes data, and interacts with various peripherals
Texniki həllərdə PIC18F24J11T-I/SO tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is the maximum operating frequency of PIC18F24J11T-I/SO?
- The maximum operating frequency of PIC18F24J11T-I/SO is 32 MHz.
What are the key features of PIC18F24J11T-I/SO?
- Some key features of PIC18F24J11T-I/SO include 16KB Flash program memory, 768 bytes of RAM, and 256 bytes of EEPROM data memory.
Can PIC18F24J11T-I/SO be used in battery-powered applications?
- Yes, PIC18F24J11T-I/SO is suitable for battery-powered applications due to its low power consumption features.
What communication interfaces are supported by PIC18F24J11T-I/SO?
- PIC18F24J11T-I/SO supports SPI, I2C, and UART communication interfaces.
Is PIC18F24J11T-I/SO suitable for industrial control applications?
- Yes, PIC18F24J11T-I/SO is well-suited for industrial control applications due to its robust design and communication capabilities.
What development tools are available for programming PIC18F24J11T-I/SO?
- Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC18F24J11T-I/SO.
Does PIC18F24J11T-I/SO have built-in analog-to-digital converters (ADC)?
- Yes, PIC18F24J11T-I/SO features integrated 10-bit ADC modules.
Can PIC18F24J11T-I/SO be used in temperature sensing applications?
- Yes, PIC18F24J11T-I/SO can be utilized in temperature sensing applications with the help of external temperature sensors.
What are the available package options for PIC18F24J11T-I/SO?
- PIC18F24J11T-I/SO is available in a 28-pin SOIC package.
Are there any application notes or reference designs available for PIC18F24J11T-I/SO?
- Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC18F24J11T-I/SO in various technical solutions.