Microchip Technology
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PIC18F25J10-I/SP
Ətraflı Baxın Məlumat vərəqləri

PIC18F25J10-I/SP

Product Overview

Category

The PIC18F25J10-I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash program memory
  • Low power consumption
  • Wide operating voltage range
  • Enhanced peripheral integration
  • Flexible I/O options

Package

The PIC18F25J10-I/SP is available in a small outline, plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic applications.

Packaging/Quantity

The PIC18F25J10-I/SP is typically packaged in reels or tubes, with a quantity of 25 units per package.

Specifications

  • Microcontroller Family: PIC18
  • CPU Speed: 25 MHz
  • Program Memory Size: 32 KB
  • RAM Size: 1.5 KB
  • Number of I/O Pins: 22
  • ADC Channels: 12
  • UART Modules: 2
  • SPI Modules: 1
  • I2C Modules: 1
  • Operating Voltage Range: 2.0V to 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18F25J10-I/SP has a total of 28 pins, each serving a specific function. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. MCLR/VPP - Master Clear/Voltage Programming Pin
  18. RB0/INT0 - General-purpose I/O pin / External Interrupt 0
  19. RB1/INT1 - General-purpose I/O pin / External Interrupt 1
  20. RB2/INT2 - General-purpose I/O pin / External Interrupt 2
  21. RB3/INT3 - General-purpose I/O pin / External Interrupt 3
  22. RB4 - General-purpose I/O pin
  23. RB5 - General-purpose I/O pin
  24. RB6 - General-purpose I/O pin
  25. RB7 - General-purpose I/O pin
  26. VDD - Power supply voltage
  27. VSS - Ground
  28. VCAP - Capacitor connection for internal voltage regulator

Functional Features

The PIC18F25J10-I/SP offers a range of functional features that enhance its performance and versatility:

  • High-speed processing capabilities
  • Flash program memory for easy reprogramming
  • Integrated analog-to-digital converters (ADC)
  • Multiple communication interfaces (UART, SPI, I2C)
  • Timers and PWM modules for precise timing control
  • Enhanced I/O options for flexible connectivity
  • Low power consumption modes for energy efficiency

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture for efficient processing
  • Wide operating voltage range allows for versatile applications
  • Enhanced peripheral integration reduces external component count
  • Flexible I/O options provide connectivity to various devices
  • Low power consumption extends battery life in portable applications

Disadvantages

  • Limited program memory size compared to higher-end microcontrollers
  • Relatively fewer I/O pins compared to larger package variants
  • May require additional external components for certain applications

Working Principles

The PIC18F25J10-I/SP operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with peripherals and sensors through its I/O pins, and performs calculations and data processing tasks.

Detailed Application Field Plans

The PIC18F25J10-I/SP finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems, motor control, and monitoring devices.
  2. Consumer electronics: Home appliances, remote controls, and audio/video equipment.
  3. Automotive: Engine control units, dashboard displays, and lighting systems.
  4. Medical devices: Patient monitoring, diagnostic equipment

Texniki həllərdə PIC18F25J10-I/SP tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the maximum operating frequency of PIC18F25J10-I/SP?
    Answer: The maximum operating frequency of PIC18F25J10-I/SP is 32 MHz.

  2. Question: What are the key features of PIC18F25J10-I/SP?
    Answer: The key features of PIC18F25J10-I/SP include 32 KB Flash program memory, 1.25 KB RAM, and 256 bytes of EEPROM data memory.

  3. Question: Can PIC18F25J10-I/SP be used for low-power applications?
    Answer: Yes, PIC18F25J10-I/SP is suitable for low-power applications due to its low power consumption features.

  4. Question: What communication interfaces are supported by PIC18F25J10-I/SP?
    Answer: PIC18F25J10-I/SP supports SPI, I2C, and UART communication interfaces.

  5. Question: Is PIC18F25J10-I/SP suitable for industrial control applications?
    Answer: Yes, PIC18F25J10-I/SP is suitable for industrial control applications due to its robust design and features.

  6. Question: What development tools are available for programming PIC18F25J10-I/SP?
    Answer: Development tools such as MPLAB X IDE and MPLAB XC8 compiler can be used for programming PIC18F25J10-I/SP.

  7. Question: Can PIC18F25J10-I/SP be used in automotive electronics?
    Answer: Yes, PIC18F25J10-I/SP is suitable for automotive electronics applications due to its reliability and performance.

  8. Question: What are the input/output options available on PIC18F25J10-I/SP?
    Answer: PIC18F25J10-I/SP provides a variety of digital and analog input/output options for interfacing with external components.

  9. Question: Does PIC18F25J10-I/SP have built-in security features?
    Answer: Yes, PIC18F25J10-I/SP offers built-in security features such as code protection and data EEPROM write protection.

  10. Question: Are there any application notes or reference designs available for PIC18F25J10-I/SP?
    Answer: Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC18F25J10-I/SP in various technical solutions.